[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230621141307.GC18703@pendragon.ideasonboard.com>
Date: Wed, 21 Jun 2023 17:13:07 +0300
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Michal Simek <michal.simek@....com>
Cc: linux-kernel@...r.kernel.org, monstr@...str.eu,
michal.simek@...inx.com, git@...inx.com,
Conor Dooley <conor+dt@...nel.org>,
Harini Katakam <harini.katakam@....com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Michael Grzeschik <m.grzeschik@...gutronix.de>,
Parth Gajjar <parth.gajjar@....com>,
Piyush Mehta <piyush.mehta@...inx.com>,
Radhey Shyam Pandey <radhey.shyam.pandey@....com>,
Rob Herring <robh+dt@...nel.org>,
Robert Hancock <robert.hancock@...ian.com>,
Tanmay Shah <tanmay.shah@....com>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] arm64: zynqmp: Fix dwc3 usb interrupt description
Hi Michal,
Thank you for the patch.
On Mon, Jun 19, 2023 at 09:37:54AM +0200, Michal Simek wrote:
> Based on DT binding dwc_usb3 is single entry without anything else. That's
> why combination dwc3_usb3, otg is not allowed. That's why split it to host
> and peripheral pair which both points to the same IRQ.
> DWC3 code is reading these two properties first before generic dwc_usb3.
>
> Signed-off-by: Michal Simek <michal.simek@....com>
> ---
>
> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 02cfcc716936..e8104ffc6663 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -888,8 +888,8 @@ dwc3_0: usb@...00000 {
> compatible = "snps,dwc3";
> reg = <0x0 0xfe200000 0x0 0x40000>;
> interrupt-parent = <&gic>;
> - interrupt-names = "dwc_usb3", "otg";
> - interrupts = <0 65 4>, <0 69 4>;
> + interrupt-names = "host", "peripheral", "otg";
> + interrupts = <0 65 4>, <0 65 4>, <0 69 4>;
This should read
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
The issue isn't introduced by this patch, so it should probably be fixed
by a separate patch on top, to convert the whole zynqmp.dtsi file. Do
you have any plan to do so, or should I ?
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> clock-names = "bus_early", "ref";
> iommus = <&smmu 0x860>;
> snps,quirk-frame-length-adjustment = <0x20>;
> @@ -915,8 +915,8 @@ dwc3_1: usb@...00000 {
> compatible = "snps,dwc3";
> reg = <0x0 0xfe300000 0x0 0x40000>;
> interrupt-parent = <&gic>;
> - interrupt-names = "dwc_usb3", "otg";
> - interrupts = <0 70 4>, <0 74 4>;
> + interrupt-names = "host", "peripheral", "otg";
> + interrupts = <0 70 4>, <0 70 4>, <0 74 4>;
> clock-names = "bus_early", "ref";
> iommus = <&smmu 0x861>;
> snps,quirk-frame-length-adjustment = <0x20>;
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists