[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230622184422.4e72vtqk53nnx42g@halaney-x13s>
Date: Thu, 22 Jun 2023 13:44:22 -0500
From: Andrew Halaney <ahalaney@...hat.com>
To: Bartosz Golaszewski <brgl@...ev.pl>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Richard Cochran <richardcochran@...il.com>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: Re: [RESEND PATCH v2 0/5] arm64: dts: qcom: enable ethernet on
sa8775p-ride
On Thu, Jun 22, 2023 at 02:01:37PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
>
> Bjorn,
>
> Now that all other bits and pieces are in next, I'm resending the reviewed
> DTS patches for pick up. This enables one of the 1Gb ethernet ports on
> sa8775p-ride.
>
> Bartosz Golaszewski (5):
> arm64: dts: qcom: sa8775p: add the SGMII PHY node
> arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface
> arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY
> arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0
> arm64: dts: qcom: sa8775p-ride: enable ethernet0
>
> arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 109 ++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 42 +++++++++
> 2 files changed, 151 insertions(+)
>
> --
> 2.39.2
>
Tested-by: Andrew Halaney <ahalaney@...hat.com>
note, I did uncover a bug in stmmac (imo) wrt unbalanced calls to
serdes_powerup/serdes_powerdown() which I plan on trying to fix shortly.
Not really related to any of the Qualcomm specific bits though. This
looks good to me.
You can trigger the bug I mentioned by removing the dwmac-qcom-ethqos module:
[ 174.893710] ------------[ cut here ]------------
[ 174.898459] unbalanced disables for vreg_l5a
[ 174.902868] WARNING: CPU: 5 PID: 584 at drivers/regulator/core.c:2996 _regulator_disable+0xe8/0x1c8
[ 174.912150] Modules linked in: r8152 rfkill marvell dwmac_qcom_ethqos(-) stmmac_platform stmmac qcom_pon crct10dif_ce spi_geni_qcom i2c_qcom_geni phy_qcom_qmp_usb pcs_xpcs phy_qcom_snps_femto_v2 qcom_wdt socinfo fuse ufs_qcom phy_qcom_qmp_ufs
[ 174.934171] CPU: 5 PID: 584 Comm: modprobe Not tainted 6.4.0-rc7-next-20230622-00006-gb4d4b58e3c81-dirty #29
[ 174.944250] Hardware name: Qualcomm SA8775P Ride (DT)
[ 174.949438] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 174.956578] pc : _regulator_disable+0xe8/0x1c8
[ 174.961143] lr : _regulator_disable+0xe8/0x1c8
[ 174.965709] sp : ffff800082c13b50
[ 174.969114] x29: ffff800082c13b50 x28: ffff592b4c692d00 x27: 0000000000000000
[ 174.976431] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 174.983750] x23: ffff592b40dd8c90 x22: ffff592b40f47490 x21: ffff592b41a72000
[ 174.991067] x20: ffff592b409c6900 x19: ffff592b409c6900 x18: 0000000000000006
[ 174.998385] x17: 3630333230322d74 x16: ffffcc489c71e6f8 x15: ffff800082c135d0
[ 175.005702] x14: 0000000000000000 x13: 61356c5f67657276 x12: 20726f662073656c
[ 175.013019] x11: fffffffffffe0000 x10: ffffcc489ea33488 x9 : ffffcc489c27aa10
[ 175.020336] x8 : 00000000ffffefff x7 : ffffcc489ea33488 x6 : 80000000fffff000
[ 175.027654] x5 : ffff5939bb92acc8 x4 : 0000000000000000 x3 : 0000000000000000
[ 175.034971] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff592b4c692d00
[ 175.042289] Call trace:
[ 175.044802] _regulator_disable+0xe8/0x1c8
[ 175.049010] regulator_disable+0x4c/0x98
[ 175.053040] phy_power_off+0x90/0xe0
[ 175.056714] qcom_ethqos_serdes_powerdown+0x28/0x48 [dwmac_qcom_ethqos]
[ 175.063510] stmmac_dvr_remove+0xa0/0x178 [stmmac]
[ 175.068440] stmmac_pltfr_remove+0x2c/0x80 [stmmac_platform]
[ 175.074255] platform_remove+0x34/0x80
[ 175.078107] device_remove+0x54/0x90
[ 175.081783] device_release_driver_internal+0x1dc/0x240
[ 175.087150] driver_detach+0x58/0xa8
[ 175.090824] bus_remove_driver+0x74/0xd0
[ 175.094856] driver_unregister+0x38/0x70
[ 175.098887] platform_driver_unregister+0x1c/0x30
[ 175.103721] qcom_ethqos_driver_exit+0x18/0x1b8 [dwmac_qcom_ethqos]
[ 175.110160] __arm64_sys_delete_module+0x1a8/0x298
[ 175.115082] invoke_syscall+0x50/0x128
[ 175.118936] el0_svc_common.constprop.0+0xcc/0xf8
[ 175.123770] do_el0_svc+0x40/0xa8
[ 175.127178] el0_svc+0x2c/0x88
[ 175.130318] el0t_64_sync_handler+0x100/0x130
[ 175.134795] el0t_64_sync+0x190/0x198
[ 175.138560] ---[ end trace 0000000000000000 ]---
[root@...p19-243-249 ~]#
Just dumping the stack on serdes_powerdown/up calls you get the
following:
[ 6.179584] qcom-ethqos 23040000.ethernet eth0: PHY [stmmac-0:08] driver [Marvell 88E1510] (irq=POLL)
[ 6.189571] CPU: 0 PID: 323 Comm: NetworkManager Not tainted 6.4.0-rc7-next-20230622-00006-gb4d4b58e3c81-dirty #29
[ 6.200192] Hardware name: Qualcomm SA8775P Ride (DT)
[ 6.205373] Call trace:
[ 6.207896] dump_backtrace+0x9c/0x100
[ 6.211752] show_stack+0x20/0x38
[ 6.215160] dump_stack_lvl+0x48/0x60
[ 6.218929] dump_stack+0x18/0x28
[ 6.222335] qcom_ethqos_serdes_powerup+0x20/0x70 [dwmac_qcom_ethqos]
[ 6.228957] __stmmac_open+0x138/0x488 [stmmac]
[ 6.233634] stmmac_open+0x4c/0xe8 [stmmac]
[ 6.237948] __dev_open+0x108/0x1e8
[ 6.241535] __dev_change_flags+0x194/0x218
[ 6.245834] dev_change_flags+0x2c/0x80
[ 6.249778] do_setlink+0x2b0/0xef8
[ 6.253363] __rtnl_newlink+0x514/0x870
[ 6.257305] rtnl_newlink+0x58/0x90
[ 6.260891] rtnetlink_rcv_msg+0x134/0x390
[ 6.265100] netlink_rcv_skb+0x64/0x138
[ 6.269046] rtnetlink_rcv+0x20/0x38
[ 6.272721] netlink_unicast+0x2f0/0x350
[ 6.276755] netlink_sendmsg+0x1b0/0x430
[ 6.280789] ____sys_sendmsg+0x1d8/0x2c8
[ 6.284826] ___sys_sendmsg+0xb4/0x110
[ 6.288680] __sys_sendmsg+0x8c/0xf0
[ 6.292357] __arm64_sys_sendmsg+0x2c/0x40
[ 6.296570] invoke_syscall+0x50/0x128
[ 6.300424] el0_svc_common.constprop.0+0xcc/0xf8
[ 6.305253] do_el0_svc+0x40/0xa8
[ 6.308662] el0_svc+0x2c/0x88
[ 6.311804] el0t_64_sync_handler+0x100/0x130
[ 6.316285] el0t_64_sync+0x190/0x198
<snip>
[root@...p19-243-249 ~]# modprobe -r dwmac_qcom_ethqos
[ 174.562075] qcom-ethqos 23040000.ethernet eth0: stmmac_dvr_remove: removing driver
[ 174.570660] stmmac_pcs: Link Down
[ 174.580082] CPU: 5 PID: 584 Comm: modprobe Not tainted 6.4.0-rc7-next-20230622-00006-gb4d4b58e3c81-dirty #29
[ 174.590176] Hardware name: Qualcomm SA8775P Ride (DT)
[ 174.595363] Call trace:
[ 174.597881] dump_backtrace+0x9c/0x100
[ 174.601744] show_stack+0x20/0x38
[ 174.605154] dump_stack_lvl+0x48/0x60
[ 174.608926] dump_stack+0x18/0x28
[ 174.612339] qcom_ethqos_serdes_powerdown+0x20/0x48 [dwmac_qcom_ethqos]
[ 174.619138] stmmac_release+0x234/0x2e0 [stmmac]
[ 174.623893] __dev_close_many+0xb4/0x160
[ 174.627920] dev_close_many+0x8c/0x140
[ 174.631777] unregister_netdevice_many_notify+0x140/0x7a0
[ 174.637320] unregister_netdevice_queue+0xa0/0xe8
[ 174.642151] unregister_netdev+0x2c/0x48
[ 174.646179] stmmac_dvr_remove+0x88/0x178 [stmmac]
[ 174.651109] stmmac_pltfr_remove+0x2c/0x80 [stmmac_platform]
[ 174.656925] platform_remove+0x34/0x80
[ 174.660786] device_remove+0x54/0x90
[ 174.664468] device_release_driver_internal+0x1dc/0x240
[ 174.669834] driver_detach+0x58/0xa8
[ 174.673514] bus_remove_driver+0x74/0xd0
[ 174.677552] driver_unregister+0x38/0x70
[ 174.681578] platform_driver_unregister+0x1c/0x30
[ 174.686408] qcom_ethqos_driver_exit+0x18/0x1b8 [dwmac_qcom_ethqos]
[ 174.692847] __arm64_sys_delete_module+0x1a8/0x298
[ 174.697767] invoke_syscall+0x50/0x128
[ 174.701617] el0_svc_common.constprop.0+0xcc/0xf8
[ 174.706449] do_el0_svc+0x40/0xa8
[ 174.709864] el0_svc+0x2c/0x88
[ 174.713009] el0t_64_sync_handler+0x100/0x130
[ 174.717482] el0t_64_sync+0x190/0x198
[ 174.721919] qcom-ethqos 23040000.ethernet eth0: FPE workqueue stop
[ 174.779478] CPU: 5 PID: 584 Comm: modprobe Not tainted 6.4.0-rc7-next-20230622-00006-gb4d4b58e3c81-dirty #29
[ 174.789565] Hardware name: Qualcomm SA8775P Ride (DT)
[ 174.794754] Call trace:
[ 174.797267] dump_backtrace+0x9c/0x100
[ 174.801123] show_stack+0x20/0x38
[ 174.804528] dump_stack_lvl+0x48/0x60
[ 174.808295] dump_stack+0x18/0x28
[ 174.811700] qcom_ethqos_serdes_powerdown+0x20/0x48 [dwmac_qcom_ethqos]
[ 174.818497] stmmac_dvr_remove+0xa0/0x178 [stmmac]
[ 174.823429] stmmac_pltfr_remove+0x2c/0x80 [stmmac_platform]
[ 174.829245] platform_remove+0x34/0x80
[ 174.833097] device_remove+0x54/0x90
[ 174.836772] device_release_driver_internal+0x1dc/0x240
[ 174.842138] driver_detach+0x58/0xa8
[ 174.845810] bus_remove_driver+0x74/0xd0
[ 174.849841] driver_unregister+0x38/0x70
[ 174.853870] platform_driver_unregister+0x1c/0x30
[ 174.858702] qcom_ethqos_driver_exit+0x18/0x1b8 [dwmac_qcom_ethqos]
[ 174.865140] __arm64_sys_delete_module+0x1a8/0x298
[ 174.870061] invoke_syscall+0x50/0x128
[ 174.873913] el0_svc_common.constprop.0+0xcc/0xf8
[ 174.878745] do_el0_svc+0x40/0xa8
[ 174.882153] el0_svc+0x2c/0x88
[ 174.885292] el0t_64_sync_handler+0x100/0x130
[ 174.889768] el0t_64_sync+0x190/0x198
Need to figure out which one of those serdes_powerdown() calls to undo.
Thanks,
Andrew
Powered by blists - more mailing lists