linux-kernel - Re: [PATCH v2 5/6] can: tcan4x5x: Add support for tcan4552/4553

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <e2cc150b-49e3-7f2f-ce7f-a5982d129346@linaro.org>
Date:   Thu, 22 Jun 2023 14:52:48 +0200
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Markus Schneider-Pargmann <msp@...libre.com>
Cc:     Wolfgang Grandegger <wg@...ndegger.com>,
        Marc Kleine-Budde <mkl@...gutronix.de>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        "David S . Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Conor Dooley <conor+dt@...nel.org>,
        Chandrasekar Ramakrishnan <rcsekar@...sung.com>,
        Michal Kubiak <michal.kubiak@...el.com>,
        Vivek Yadav <vivek.2311@...sung.com>,
        linux-can@...r.kernel.org, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Simon Horman <simon.horman@...igine.com>
Subject: Re: [PATCH v2 5/6] can: tcan4x5x: Add support for tcan4552/4553

On 22/06/2023 14:23, Markus Schneider-Pargmann wrote:
>>
>> Yeah, but your code is different, although maybe we just misunderstood
>> each other. You wrote that you cannot use the GPIOs, so I assumed you
>> need to know the variant before using the GPIOs. Then you need
>> compatibles. It's not the case here. You can read the variant and based
>> on this skip entirely GPIOs as they are entirely missing.
> 
> The version information is always readable for that chip, regardless of
> state and wake GPIOs as far as I know. So yes it is possible to setup
> the GPIOs based on the content of the ID register.
> 
> I personally would prefer separate compatibles. The binding
> documentation needs to address that wake and state GPIOs are not
> available for tcan4552/4553. I think having compatibles that are for
> these chips would make sense then. However this is my opinion, you are
> the maintainer.

We do not talk about compatibles in the bindings here. This is
discussion about your driver. The entire logic of validating DTB is
flawed and not needed. Detect the variant and act based on this.

Best regards,
Krzysztof