| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230623175409.GA2534204@ravnborg.org>
Date: Fri, 23 Jun 2023 19:54:09 +0200
From: Sam Ravnborg <sam@...nborg.org>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: Geert Uytterhoeven <geert+renesas@...der.be>,
devicetree@...r.kernel.org, Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Magnus Damm <magnus.damm@...il.com>,
linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
linux-renesas-soc@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Kieran Bingham <kieran.bingham+renesas@...asonboard.com>,
Thomas Zimmermann <tzimmermann@...e.de>
Subject: Re: [PATCH 39/39] drm: renesas: shmobile: Add DT support
On Fri, Jun 23, 2023 at 08:50:19PM +0300, Laurent Pinchart wrote:
> Hi Geert,
>
> Thank you for the patch.
>
> On Thu, Jun 22, 2023 at 11:21:51AM +0200, Geert Uytterhoeven wrote:
> > Add DT support, by:
> > 1. Creating a panel bridge from DT, and attaching it to the encoder,
> > 2. Replacing the custom connector with a bridge connector,
> > 3. Obtaining clock configuration based on the compatible value.
> >
> > Note that for now the driver uses a fixed clock configuration selecting
> > the bus clock, as the current code to select other clock inputs needs
> > changes to support any other SoCs than SH7724.
> >
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
> > Cc: Rob Herring <robh+dt@...nel.org>
> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
> > Cc: Conor Dooley <conor+dt@...nel.org>
> > Cc: devicetree@...r.kernel.org
> > ---
> > SH-Mobile AG5 (SH73A0) support is untested.
> >
> > Unbind crashes when drm_encoder_cleanup() calls drm_bridge_detach(), as
> > the bridge (allocated by devm_drm_panel_bridge_add()) has already been
> > freed by that time.
> > Should I allocate my encoder with devm_kzalloc(), instead of embedding
> > it inside struct shmob_drm_device?
>
> That shouldn't be needed, if you manage the memory for shmob_drm_device
> with the DRM managed helpers.
>
> Lifetime management of bridges is currently completely broken, there's
> nothing that prevents bridges from being freed while still in use.
> That's an issue in DRM, not in your driver.
>
> > ---
> > .../gpu/drm/renesas/shmobile/shmob_drm_crtc.c | 101 +++++++++++++++---
> > .../gpu/drm/renesas/shmobile/shmob_drm_crtc.h | 1 +
> > .../gpu/drm/renesas/shmobile/shmob_drm_drv.c | 27 ++++-
> > .../gpu/drm/renesas/shmobile/shmob_drm_drv.h | 6 ++
> > 4 files changed, 118 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c
> > index 17456dde57637ab8..1ec87841658de4f0 100644
> > --- a/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c
> > +++ b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c
> > @@ -9,12 +9,16 @@
> >
> > #include <linux/clk.h>
> > #include <linux/media-bus-format.h>
> > +#include <linux/of.h>
> > +#include <linux/of_graph.h>
> > #include <linux/pm_runtime.h>
> >
> > #include <drm/drm_atomic.h>
> > #include <drm/drm_atomic_helper.h>
> > #include <drm/drm_atomic_state_helper.h>
> > #include <drm/drm_atomic_uapi.h>
> > +#include <drm/drm_bridge.h>
> > +#include <drm/drm_bridge_connector.h>
> > #include <drm/drm_crtc.h>
> > #include <drm/drm_crtc_helper.h>
> > #include <drm/drm_fb_dma_helper.h>
> > @@ -23,6 +27,7 @@
> > #include <drm/drm_gem_dma_helper.h>
> > #include <drm/drm_modeset_helper.h>
> > #include <drm/drm_modeset_helper_vtables.h>
> > +#include <drm/drm_panel.h>
> > #include <drm/drm_probe_helper.h>
> > #include <drm/drm_simple_kms_helper.h>
> > #include <drm/drm_vblank.h>
> > @@ -35,10 +40,6 @@
> > #include "shmob_drm_plane.h"
> > #include "shmob_drm_regs.h"
> >
> > -/*
> > - * TODO: panel support
> > - */
> > -
> > /* -----------------------------------------------------------------------------
> > * Clock management
> > */
> > @@ -129,7 +130,6 @@ static void shmob_drm_crtc_setup_geometry(struct shmob_drm_crtc *scrtc)
> > value |= LDMT1R_VPOL;
> > if (mode->flags & DRM_MODE_FLAG_NHSYNC)
> > value |= LDMT1R_HPOL;
> > -
>
> This could be moved to one of the patches in the series that touch this
> code.
>
> > lcdc_write(sdev, LDMT1R, value);
> >
> > value = ((mode->hdisplay / 8) << 16) /* HDCN */
> > @@ -191,7 +191,7 @@ static void shmob_drm_crtc_start(struct shmob_drm_crtc *scrtc)
> > {
> > struct drm_crtc *crtc = &scrtc->base;
> > struct shmob_drm_device *sdev = to_shmob_device(crtc->dev);
> > - const struct shmob_drm_interface_data *idata = &sdev->pdata->iface;
> > + unsigned int clk_div = sdev->config.clk_div;
> > struct device *dev = sdev->dev;
> > u32 value;
> > int ret;
> > @@ -220,17 +220,17 @@ static void shmob_drm_crtc_start(struct shmob_drm_crtc *scrtc)
> > lcdc_write(sdev, LDPMR, 0);
> >
> > value = sdev->lddckr;
> > - if (idata->clk_div) {
> > + if (clk_div) {
> > /* FIXME: sh7724 can only use 42, 48, 54 and 60 for the divider
> > * denominator.
> > */
> > lcdc_write(sdev, LDDCKPAT1R, 0);
> > - lcdc_write(sdev, LDDCKPAT2R, (1 << (idata->clk_div / 2)) - 1);
> > + lcdc_write(sdev, LDDCKPAT2R, (1 << (clk_div / 2)) - 1);
> >
> > - if (idata->clk_div == 1)
> > + if (clk_div == 1)
> > value |= LDDCKR_MOSEL;
> > else
> > - value |= idata->clk_div;
> > + value |= clk_div;
> > }
> >
> > lcdc_write(sdev, LDDCKR, value);
> > @@ -479,7 +479,7 @@ int shmob_drm_crtc_create(struct shmob_drm_device *sdev)
> > }
> >
> > /* -----------------------------------------------------------------------------
> > - * Encoder
> > + * Legacy Encoder
> > */
> >
> > static bool shmob_drm_encoder_mode_fixup(struct drm_encoder *encoder,
> > @@ -508,9 +508,43 @@ static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
> > .mode_fixup = shmob_drm_encoder_mode_fixup,
> > };
> >
> > +/* -----------------------------------------------------------------------------
> > + * Encoder
> > + */
> > +
> > +static int shmob_drm_encoder_init(struct shmob_drm_device *sdev,
> > + struct device_node *enc_node)
> > +{
> > + struct drm_bridge *bridge;
> > + struct drm_panel *panel;
> > + int ret;
> > +
> > + /* Create a panel bridge */
> > + panel = of_drm_find_panel(enc_node);
>
> Using drm_of_find_panel_or_bridge() would allow supporting platforms
> that connect a non-panel device to the SoC, in additional to the already
> supported panels.
>From the documentation of drm_of_find_panel_or_bridge():
* This function is deprecated and should not be used in new drivers. Use
* devm_drm_of_get_bridge() instead.
I suggest to go that route.
> > @@ -147,11 +148,13 @@ static int shmob_drm_remove(struct platform_device *pdev)
> > static int shmob_drm_probe(struct platform_device *pdev)
> > {
> > struct shmob_drm_platform_data *pdata = pdev->dev.platform_data;
>
> How about dropping non-DT support ? That would simplify the driver.
+1 for that, without knowing the implications.
Sam
Powered by blists - more mailing lists