| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230620-hx3-v7-1-f79b4b22a1bf@skidata.com>
Date: Fri, 23 Jun 2023 09:28:12 +0200
From: Benjamin Bara <bbara93@...il.com>
To: Matthias Kaehlcke <mka@...omium.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Benjamin Bara <benjamin.bara@...data.com>
Cc: Alexander Stein <alexander.stein@...tq-group.com>,
linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: [PATCH v7 1/3] usb: misc: onboard-hub: support multiple power
supplies
From: Benjamin Bara <benjamin.bara@...data.com>
As some of the onboard hubs require multiple power supplies, provide the
environment to support them.
Signed-off-by: Benjamin Bara <benjamin.bara@...data.com>
---
v7:
- %ld -> %zu
v6:
- %d -> %ld
v5:
- use ARRAY_SIZE(supply_names) for MAX_SUPPLIES
v4:
- set num_supplies=1 for the existing hubs
- drop duplicate num_supplies in onboard_hub struct
- clarify connection between supply_names and MAX_SUPPLIES
v3:
- fix nits mentioned in v2
v2:
- replace (err != 0) with (err)
---
drivers/usb/misc/onboard_usb_hub.c | 37 +++++++++++++++++++++++++++++--------
drivers/usb/misc/onboard_usb_hub.h | 7 +++++++
2 files changed, 36 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
index 12fc6eb67c3b..b31548cd60e7 100644
--- a/drivers/usb/misc/onboard_usb_hub.c
+++ b/drivers/usb/misc/onboard_usb_hub.c
@@ -27,6 +27,17 @@
#include "onboard_usb_hub.h"
+/*
+ * Use generic names, as the actual names might differ between hubs. If a new
+ * hub requires more than the currently supported supplies, add a new one here.
+ */
+static const char * const supply_names[] = {
+ "vdd",
+ "vdd2",
+};
+
+#define MAX_SUPPLIES ARRAY_SIZE(supply_names)
+
static void onboard_hub_attach_usb_driver(struct work_struct *work);
static struct usb_device_driver onboard_hub_usbdev_driver;
@@ -40,7 +51,7 @@ struct usbdev_node {
};
struct onboard_hub {
- struct regulator *vdd;
+ struct regulator_bulk_data supplies[MAX_SUPPLIES];
struct device *dev;
const struct onboard_hub_pdata *pdata;
struct gpio_desc *reset_gpio;
@@ -55,9 +66,9 @@ static int onboard_hub_power_on(struct onboard_hub *hub)
{
int err;
- err = regulator_enable(hub->vdd);
+ err = regulator_bulk_enable(hub->pdata->num_supplies, hub->supplies);
if (err) {
- dev_err(hub->dev, "failed to enable regulator: %d\n", err);
+ dev_err(hub->dev, "failed to enable supplies: %d\n", err);
return err;
}
@@ -75,9 +86,9 @@ static int onboard_hub_power_off(struct onboard_hub *hub)
gpiod_set_value_cansleep(hub->reset_gpio, 1);
- err = regulator_disable(hub->vdd);
+ err = regulator_bulk_disable(hub->pdata->num_supplies, hub->supplies);
if (err) {
- dev_err(hub->dev, "failed to disable regulator: %d\n", err);
+ dev_err(hub->dev, "failed to disable supplies: %d\n", err);
return err;
}
@@ -232,6 +243,7 @@ static int onboard_hub_probe(struct platform_device *pdev)
const struct of_device_id *of_id;
struct device *dev = &pdev->dev;
struct onboard_hub *hub;
+ unsigned int i;
int err;
hub = devm_kzalloc(dev, sizeof(*hub), GFP_KERNEL);
@@ -246,9 +258,18 @@ static int onboard_hub_probe(struct platform_device *pdev)
if (!hub->pdata)
return -EINVAL;
- hub->vdd = devm_regulator_get(dev, "vdd");
- if (IS_ERR(hub->vdd))
- return PTR_ERR(hub->vdd);
+ if (hub->pdata->num_supplies > MAX_SUPPLIES)
+ return dev_err_probe(dev, -EINVAL, "max %zu supplies supported!\n",
+ MAX_SUPPLIES);
+
+ for (i = 0; i < hub->pdata->num_supplies; i++)
+ hub->supplies[i].supply = supply_names[i];
+
+ err = devm_regulator_bulk_get(dev, hub->pdata->num_supplies, hub->supplies);
+ if (err) {
+ dev_err(dev, "Failed to get regulator supplies: %d\n", err);
+ return err;
+ }
hub->reset_gpio = devm_gpiod_get_optional(dev, "reset",
GPIOD_OUT_HIGH);
diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
index aca5f50eb0da..41a4127a92dc 100644
--- a/drivers/usb/misc/onboard_usb_hub.h
+++ b/drivers/usb/misc/onboard_usb_hub.h
@@ -8,30 +8,37 @@
struct onboard_hub_pdata {
unsigned long reset_us; /* reset pulse width in us */
+ unsigned int num_supplies; /* number of supplies */
};
static const struct onboard_hub_pdata microchip_usb424_data = {
.reset_us = 1,
+ .num_supplies = 1,
};
static const struct onboard_hub_pdata realtek_rts5411_data = {
.reset_us = 0,
+ .num_supplies = 1,
};
static const struct onboard_hub_pdata ti_tusb8041_data = {
.reset_us = 3000,
+ .num_supplies = 1,
};
static const struct onboard_hub_pdata genesys_gl850g_data = {
.reset_us = 3,
+ .num_supplies = 1,
};
static const struct onboard_hub_pdata genesys_gl852g_data = {
.reset_us = 50,
+ .num_supplies = 1,
};
static const struct onboard_hub_pdata vialab_vl817_data = {
.reset_us = 10,
+ .num_supplies = 1,
};
static const struct of_device_id onboard_hub_match[] = {
--
2.34.1
Powered by blists - more mailing lists