[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAPqJEFp0r5tZJZ48nLakRd92zNf1D93hbTeGUsTyVuF+JAsJEw@mail.gmail.com>
Date: Sat, 24 Jun 2023 00:03:05 +0800
From: Eric Lin <eric.lin@...ive.com>
To: Will Deacon <will@...nel.org>
Cc: Conor Dooley <conor@...nel.org>,
Conor Dooley <conor.dooley@...rochip.com>, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, palmer@...belt.com,
paul.walmsley@...ive.com, aou@...s.berkeley.edu, maz@...nel.org,
chenhuacai@...nel.org, baolu.lu@...ux.intel.com,
kan.liang@...ux.intel.com, nnac123@...ux.ibm.com,
pierre.gondois@....com, jgross@...e.com, chao.gao@...el.com,
maobibo@...ngson.cn, linux-riscv@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
dslin1010@...il.com, Greentime Hu <greentime.hu@...ive.com>,
Zong Li <zong.li@...ive.com>, Nick Hu <nick.hu@...ive.com>,
mark.rutland@....com, arnd@...db.de
Subject: Re: [PATCH 2/3] soc: sifive: Add SiFive private L2 cache PMU driver
Hi Will,
On Fri, Jun 23, 2023 at 9:24 PM Will Deacon <will@...nel.org> wrote:
>
> Hi folks,
>
> On Wed, Jun 21, 2023 at 04:17:24PM +0100, Conor Dooley wrote:
> > On Tue, Jun 20, 2023 at 11:14:32AM +0800, Eric Lin wrote:
> > > On Fri, Jun 16, 2023 at 6:13 PM Conor Dooley <conor.dooley@...rochip.com> wrote:
> > > > On Fri, Jun 16, 2023 at 02:32:09PM +0800, Eric Lin wrote:
> > > > > drivers/soc/sifive/Kconfig | 9 +
> > > > > drivers/soc/sifive/Makefile | 1 +
> > > > > drivers/soc/sifive/sifive_pl2.h | 20 +
> > > > > drivers/soc/sifive/sifive_pl2_cache.c | 16 +
> > > > > drivers/soc/sifive/sifive_pl2_pmu.c | 669 ++++++++++++++++++++++++++
> > > >
> > > > Perf drivers should be in drivers/perf, no?
> > > >
> > >
> > > But I grep perf_pmu_register(), it seems not all the pmu drivers are
> > > in drivers/perf as below:
> > >
> > > arch/arm/mach-imx/mmdc.c:517: ret =
> > > perf_pmu_register(&(pmu_mmdc->pmu), name, -1);
> > > arch/arm/mm/cache-l2x0-pmu.c:552: ret =
> > > perf_pmu_register(l2x0_pmu, l2x0_name, -1);
> > > ...
> > > drivers/dma/idxd/perfmon.c:627: rc = perf_pmu_register(&idxd_pmu->pmu,
> > > idxd_pmu->name, -1);
> > > drivers/fpga/dfl-fme-perf.c:904:static int
> > > fme_perf_pmu_register(struct platform_device *pdev,
> > > drivers/fpga/dfl-fme-perf.c:929: ret = perf_pmu_register(pmu, name, -1);
> > > ...
> > > drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:549: ret =
> > > perf_pmu_register(&pmu_entry->pmu, pmu_name, -1);
> > > drivers/gpu/drm/i915/i915_pmu.c:1190: ret =
> > > perf_pmu_register(&pmu->base, pmu->name, -1);
> > > drivers/hwtracing/coresight/coresight-etm-perf.c:907: ret =
> > > perf_pmu_register(&etm_pmu, CORESIGHT_ETM_PMU_NAME, -1);
> > > drivers/hwtracing/ptt/hisi_ptt.c:895: ret =
> > > perf_pmu_register(&hisi_ptt->hisi_ptt_pmu, pmu_name, -1);
> > > drivers/iommu/intel/perfmon.c:570: return
> > > perf_pmu_register(&iommu_pmu->pmu, iommu_pmu->pmu.name, -1);
> > > drivers/nvdimm/nd_perf.c:309: rc = perf_pmu_register(&nd_pmu->pmu,
> > > nd_pmu->pmu.name, -1);
> > > ...
> > >
> > > I just wondering what kind of pmu drivers should be in drivers/perf
> > > and what kind of pmu drivers should not be in drivers/perf.
> > > Thanks.
> >
> > To be quite honest, I have no idea.
> > I'm just a wee bit wary of taking anything that appears to have another
> > home via drivers/soc. I'd rather break drivers out, using the aux bus or
> > similar if need be, so that people who are knowledgeable in an area are
> > CCed on patches.
> > Hopefully Arnd or the Perf people can offer some guidance here. If it
> > does go into drivers/soc, it'll need a review from someone knowledgeable
> > of perf anyway.
>
> I'm not territorial about the perf drivers at all, but L2CC PMUs like this
> one probably fit pretty well in drivers/perf. The usual reason for putting
> drivers elsewhere is if the PMU is tightly coupled with some other IP which
> is handled by another subsystem (e.g. GPU).
>
Thanks for the explanation. OK, I'll put the pl2 cache PMU driver in
drivers/perf.
Best Regards,
Eric Lin.
> Will
Powered by blists - more mailing lists