[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230623164619.11464-1-quic_jkona@quicinc.com>
Date: Fri, 23 Jun 2023 22:16:14 +0530
From: Jagadeesh Kona <quic_jkona@...cinc.com>
To: Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
CC: Bjorn Andersson <andersson@...nel.org>,
Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>,
<linux-arm-msm@...r.kernel.org>, <linux-clk@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Taniya Das <quic_tdas@...cinc.com>,
"Jagadeesh Kona" <quic_jkona@...cinc.com>,
Satya Priya Kakitapalli <quic_skakitap@...cinc.com>,
Imran Shaik <quic_imrashai@...cinc.com>,
"Ajit Pandey" <quic_ajipan@...cinc.com>
Subject: [PATCH V5 0/5] Add camera clock controller support for SM8550
Add bindings, driver and devicetree node for camera clock controller on
SM8550.
Changes in v5:
- Added clk_lucid_ole_pll_configure() to configure lucid ole PLL's
- Used module_platform_driver() instead of subsys_initcall()
- Fixed overloading .l config with CAL_L and RINGOSC_CAL_L fields
Changes in v4:
- Dropped the extra patches added in v2, since the review comments on
v3 recommended an alternate solution
Changes in v3:
- Squashed 2 extra patches added in v2 into single patch as per review
comments
Changes in v2:
- Took care of review comments from v1
+ Removed new YAML file and reused SM8450 CAMCC YAML file for SM8550
+ Sorted the PLL names in proper order
+ Updated all PLL configurations to lower case hex
+ Reused evo ops instead of adding new ops for ole pll
+ Moved few clocks to separate patch to fix patch too long error
+ Padded non-zero address part to 8 hex digits in DT change
- Added 2 extra patches updating .l config value across chipsets to include
CAL_L and RINGOSC_CAL_L fields and removed setting CAL_L field explicitly
in clk_lucid_evo_pll_configure().
v1:
- Initial CAMCC changes for SM8550
Previous series:
v4: https://patchwork.kernel.org/project/linux-clk/list/?series=755683
v3: https://patchwork.kernel.org/project/linux-clk/list/?series=753150
v2: https://patchwork.kernel.org/project/linux-clk/list/?series=751058
v1: https://patchwork.kernel.org/project/linux-clk/list/?series=749294
Jagadeesh Kona (5):
dt-bindings: clock: qcom: Add SM8550 camera clock controller
clk: qcom: clk-alpha-pll: Add support for lucid ole pll configure
clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550
clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocks
arm64: dts: qcom: sm8550: Add camera clock controller
.../bindings/clock/qcom,sm8450-camcc.yaml | 8 +-
arch/arm64/boot/dts/qcom/sm8550.dtsi | 15 +
drivers/clk/qcom/Kconfig | 7 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/camcc-sm8550.c | 3563 +++++++++++++++++
drivers/clk/qcom/clk-alpha-pll.c | 29 +
drivers/clk/qcom/clk-alpha-pll.h | 2 +
include/dt-bindings/clock/qcom,sm8550-camcc.h | 187 +
8 files changed, 3810 insertions(+), 2 deletions(-)
create mode 100644 drivers/clk/qcom/camcc-sm8550.c
create mode 100644 include/dt-bindings/clock/qcom,sm8550-camcc.h
--
2.40.1
Powered by blists - more mailing lists