[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8d21467a-83a4-8478-dbf5-edd77461e6dc@linaro.org>
Date: Sat, 24 Jun 2023 09:01:52 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Manikanta Mylavarapu <quic_mmanikan@...cinc.com>,
agross@...nel.org, andersson@...nel.org, konrad.dybcio@...aro.org,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, jassisinghbrar@...il.com,
mathieu.poirier@...aro.org, mturquette@...libre.com,
sboyd@...nel.org, quic_eberman@...cinc.com, quic_mojha@...cinc.com,
kvalo@...nel.org, loic.poulain@...aro.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-remoteproc@...r.kernel.org,
linux-clk@...r.kernel.org
Cc: quic_srichara@...cinc.com, quic_sjaganat@...cinc.com,
quic_kathirav@...cinc.com, quic_anusha@...cinc.com,
quic_poovendh@...cinc.com, quic_varada@...cinc.com,
quic_devipriy@...cinc.com
Subject: Re: [PATCH V2 13/13] arm64: dtsi: qcom: ipq9574: Add nodes to bring
up multipd
On 22/05/2023 00:28, Manikanta Mylavarapu wrote:
> Enable nodes required for multipd remoteproc bring up.
>
> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@...cinc.com>
> ---
> Changes in V2:
> - Corrected syntax like alignmnet and kept nodes in sorted order.
> - Added 'firmware-name' property.
>
> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 118 ++++++++++++++++++++++++++
> 1 file changed, 118 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index 0e04549c69a5..ff0da53ba05f 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -160,6 +160,11 @@
> no-map;
> };
>
> + q6_region: wcnss@...00000 {
> + reg = <0x0 0x4ab00000 0x0 0x2b00000>;
> + no-map;
> + };
> +
> smem@...00000 {
> compatible = "qcom,smem";
> reg = <0x0 0x4aa00000 0x0 0x00100000>;
> @@ -697,6 +702,95 @@
> };
> };
>
> + q6v5_wcss: remoteproc@...0000 {
> + compatible = "qcom,ipq9574-q6-mpd";
> + reg = <0x0cd00000 0x4040>;
> + firmware-name = "IPQ9574/q6_fw.mdt",
> + "IPQ9574/m3_fw.mdt";
Here and...
> + interrupts-extended = <&intc GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
> + <&wcss_smp2p_in 0 0>,
> + <&wcss_smp2p_in 1 0>,
> + <&wcss_smp2p_in 2 0>,
> + <&wcss_smp2p_in 3 0>;
> + interrupt-names = "wdog",
> + "fatal",
> + "ready",
> + "handover",
> + "stop-ack";
> +
> + qcom,smem-states = <&wcss_smp2p_out 0>,
> + <&wcss_smp2p_out 1>;
> + qcom,smem-state-names = "shutdown",
> + "stop";
> + memory-region = <&q6_region>;
> +
> + glink-edge {
> + interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>;
> + label = "rtr";
> + qcom,remote-pid = <1>;
> + mboxes = <&apcs_glb 8>;
> + };
> +
> + pd-1 {
> + compatible = "qcom,ipq9574-wcss-ahb-mpd";
> + firmware-name = "IPQ9574/q6_fw.mdt";
... here - why do you have firmware in both places?
> + interrupts-extended = <&wcss_smp2p_in 8 0>,
> + <&wcss_smp2p_in 9 0>,
> + <&wcss_smp2p_in 12 0>,
> + <&wcss_smp2p_in 11 0>;
> + interrupt-names = "fatal",
> + "ready",
> + "spawn-ack",
> + "stop-ack";
> + qcom,smem-states = <&wcss_smp2p_out 8>,
> + <&wcss_smp2p_out 9>,
> + <&wcss_smp2p_out 10>;
> + qcom,smem-state-names = "shutdown",
> + "stop",
> + "spawn";
> + };
> +
> + pd-2 {
> + compatible = "qcom,ipq5018-wcss-pcie-mpd";
This compatible is confusing for this device.
Best regards,
Krzysztof
Powered by blists - more mailing lists