Message-ID: <ZJnXObRHhn5Q1dX2@google.com>
Date:   Mon, 26 Jun 2023 11:21:45 -0700
From:   Sean Christopherson <seanjc@...gle.com>
To:     Michael Roth <michael.roth@....com>
Cc:     isaku.yamahata@...el.com, kvm@...r.kernel.org,
        linux-kernel@...r.kernel.org, isaku.yamahata@...il.com,
        Paolo Bonzini <pbonzini@...hat.com>, erdemaktas@...gle.com,
        Sagi Shahar <sagis@...gle.com>,
        David Matlack <dmatlack@...gle.com>,
        Kai Huang <kai.huang@...el.com>,
        Zhi Wang <zhi.wang.linux@...il.com>, chen.bo@...el.com,
        linux-coco@...ts.linux.dev,
        Chao Peng <chao.p.peng@...ux.intel.com>,
        Ackerley Tng <ackerleytng@...gle.com>,
        Vishal Annapurve <vannapurve@...gle.com>
Subject: Re: [RFC PATCH v2 4/6] KVM: x86: Introduce fault type to indicate kvm
 page fault is private

On Sun, Jun 25, 2023, Michael Roth wrote:
> On Fri, Jun 23, 2023 at 01:04:03PM -0700, Sean Christopherson wrote:
> > On Thu, Jun 22, 2023, isaku.yamahata@...el.com wrote:
> > > diff --git a/arch/x86/kvm/mmu/mmu_internal.h b/arch/x86/kvm/mmu/mmu_internal.h
> > > index 7f9ec1e5b136..0ec0b927a391 100644
> > > --- a/arch/x86/kvm/mmu/mmu_internal.h
> > > +++ b/arch/x86/kvm/mmu/mmu_internal.h
> > > @@ -188,6 +188,13 @@ static inline bool is_nx_huge_page_enabled(struct kvm *kvm)
> > >  	return READ_ONCE(nx_huge_pages) && !kvm->arch.disable_nx_huge_pages;
> > >  }
> > >  
> > > +enum kvm_fault_type {
> > > +	KVM_FAULT_MEM_ATTR,
> > > +	KVM_FAULT_SHARED,
> > > +	KVM_FAULT_SHARED_ALWAYS,
> > > +	KVM_FAULT_PRIVATE,
> > 
> > This is silly.  Just use AMD's error code bit, i.e. PFERR_GUEST_ENC_MASK as per
> > the SNP series.
> > 
> >   Bit 34 (ENC): Set to 1 if the guest’s effective C-bit was 1, 0 otherwise.
> > 
> > Just because Intel's ucode is too crusty to support error codes larger than 16
> > bits doesn't mean KVM can't utilize the bits :-)  KVM already translates to AMD's
> > error codes for other things, e.g.
> > 
> > 	error_code |= (exit_qualification & EPT_VIOLATION_GVA_TRANSLATED) != 0 ?
> > 	       PFERR_GUEST_FINAL_MASK : PFERR_GUEST_PAGE_MASK;
> > 
> > For TDX, handle_ept_violation() can do something like:
> > 
> > 	if (is_tdx(vcpu->kvm))
> > 		error_code |= (gpa & shared) ? 0 : PFERR_GUEST_ENC_MASK;
> > 	else if (kvm_mem_is_private(vcpu->kvm, gpa_to_gfn(gpa)))
> > 		error_code |= PFERR_GUEST_ENC_MASK;
> 
> Maybe this is what you're getting at below, but seems awkward to have this
> being handling in TDX code since that would suggest that SVM module would
> also need to duplicate that logic and synthesize this PFERR_GUEST_ENC_MASK
> bit for non-SNP VMs (e.g. gmem self-tests).

Ah, right, forgot about that angle.  The non-TDX synthesizing can be done in
kvm_mmu_page_fault(), e.g.

	if (vcpu->kvm->vm_type == KVM_X86_PROTECTED_VM &&
	    kvm_mem_is_private(...))
		error_code |= PFERR_GUEST_ENC_MASK;

> So maybe SNP/TDX can rely on passing this via error_code, and then some
> common code, like kvm_mem_is_private(), can handle this for non-TDX/SNP
> guest types. But the current gmem series does this via a new .is_private
> in kvm_page_fault:
> 
>   .is_private = kvm_mem_is_private(vcpu->kvm, cr2_or_gpa >> PAGE_SHIFT),
> 
> This seems at odds with the idea of storing this 'fault->is_private'
> logic into the error_code. Isaku and I were discussing[1] that we
> should do one or the other:
> 
>   a) store everything in error_code
>   b) use the .is_private field that seems to have been introduced to
>      track exactly this information
> 
> So I think this series is attempting to do b). If you're suggesting we
> should do a), then what purpose is fault->is_private field meant to
> serve? Are you planning to get rid of it? Otherwise it seems redundant.
> 
> But I think approach b) is useful for another reason:

"is_private" would serve the same purpose as all the other bits that are derived
from the error code, e.g. improve readability, reduce line lengths, etc.  Though
looking at the name, just "private" is probably the right name.

	/* Derived from error_code.  */
	const bool exec;
	const bool write;
	const bool present;
	const bool rsvd;
	const bool user;

> > And that's not even taking into account that TDX might have a separate entry point,
> > i.e. the "is_tdx()" check can probably be avoided.
> > 
> > As for optimizing kvm_mem_is_private() to avoid unnecessary xarray lookups, that
> > can and should be done separately, e.g.
> > 
> >   static inline bool kvm_mem_is_private(struct kvm *kvm, gfn_t gfn)
> >   {
> > 	return IS_ENABLED(CONFIG_KVM_PRIVATE_MEM) &&
> > 	       kvm_guest_has_private_mem(kvm) &&
> > 	       kvm_get_memory_attributes(kvm, gfn) & KVM_MEMORY_ATTRIBUTE_PRIVATE;
> >   }
> > 
> > where x86's implementation of kvm_guest_has_private_mem() can be
> > 
> >   #define kvm_guest_has_private_mem(kvm) (!!(kvm)->vm_type)
> 
> It's just about not checking xarray for non-protected case. The
> optimization here is that neither TDX nor SNP care about the xarray as
> far as determining whether the *fault* was a private or not.

Yes, and what I am suggesting doesn't use kvm_mem_is_private() to synthesize that
flag for TDX (or SNP).

> We only care later, in part of the KVM MMU code that determines whether the
> fault type is at odds with the xarray state and whether to generate a
> KVM_EXIT_MEMORY_FAULT as a result.
> 
> In that code, both TDX/SNP, as well as gmem self-tests, will all end up
> calling kvm_mem_is_private().
> 
> In the gmem self-test case, in current gmem base series, and I think with
> what you've proposed here, we'd check the xarray via kvm_mem_is_privae(),
> both in kvm_mmu_do_page_fault(), as well as later kvm_faultin_pfn() where
> KVM_EXIT_MEMORY_FAULT case is handled. That seems off because:
> 
>   1) Checking in kvm_mem_is_private() via kvm_mmu_do_page_fault() means
>      that we will grab the value prior to when the KVM MMU records the
>      mmu_invalidate_seq, which means there's a window between
>      kvm_mmu_do_page_fault() and kvm_faultin_pfn() where an updated
>      xarray won't be noticed, and the #NPF retry logic will not get
>      triggered.

That's ok-ish, for some definitions of ok.  There's no fatal bug, but userspace
will see a spurious, arguably nonsensical exit.  If the race occurs before mmu_seq
is snapshot, this code will detect the change and exit to userspace.

	if (fault->is_private != kvm_mem_is_private(vcpu->kvm, fault->gfn))
		return kvm_do_memory_fault_exit(vcpu, fault);

>   2) For gmem self-test, kvm_mem_is_private() is the authority on
>      whether the fault is private or not. There's no need to distinguish
>      between what was set via KVM_SET_MEMORY_ATTRIBUTES, vs. what was
>      indicated via fault flags/GPA like TDX/SNP do.
> 
> So it makes sense, in the gmem case (and TDX/SNP), to defer the
> kvm_mem_is_private() till later in kvm_faultin_pfn(). It avoid a
> duplicate lookup, and a race. But .is_private only conveys
> encrypted/unencrypted fault in TDX/SNP case, it doesn't have a way to
> cleanly convey this case "just use whatever kvm_mem_is_private() reports
> later, because it will always be what the VMM set, and it's too early
> to check kvm_mem_is_private() right now".

Yeah, the duplicate lookup is unfortunate :-/  But I'd really like to be able to
make kvm_page_fault.private const, just like all the other booleans that are
derived from the error code.  My concern with making it *not* const is that
there will be a discrepancy between "private" and "error_code", and we'll have
to be very careful to never touch "private" before kvm_faultin_pfn().

And I don't want to special case "VMM defined", because the primary reason the
"VMM defined" case exists at this time is to allow testing KVM's implementation
without TDX or SNP.  E.g. I don't want to end up with code in fast_page_fault()
or so that does X for KVM_FAULT_VMM_DEFINED, but Y for KVM_FAULT_PRIVATE.

So I'm leaning toward the above be

	if (fault->is_private != kvm_mem_is_private(vcpu->kvm, fault->gfn)) {
		if (vcpu->kvm->vm_type == KVM_X86_PROTECTED_VM)
			return RET_PF_RETRY;
		else
			return kvm_do_memory_fault_exit(vcpu, fault);
	}

even though software-protected VMs would perform a technically-unnecessary
attributes lookup.  *If* software-protected VMs ever get to the point where folks
care about the performance overhead of the extra lookup, then I'm all for
revisiting the implementation, but that is a ginormous "if" at this point.  Though
even then I'd still prefer to figure out a way to make the flag const, but that's
a future problem.

> So that's where this enum type came from. Although in the discussion I
> linked to above I suggested just:
> 
>   enum kvm_fault_type {
>     KVM_FAULT_VMM_DEFINED,
>     KVM_FAULT_SHARED,
>     KVM_FAULT_PRIVATE,
> 
> Which I think would work just as well,

I want to use vm_type for tracking "VMM_DEFINED".  KVM's ABI easily allows for 64
VM types, I see no reason to reuse KVM_X86_PROTECTED_VM for TDX and/or SNP, though
the type probably should be KVM_X86_SW_PROTECTED_VM.  With that out of the way,
there's no need for an enum to track shared vs. private.

Powered by blists - more mailing lists