| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230626221019.3946448-1-robh@kernel.org>
Date: Mon, 26 Jun 2023 16:10:19 -0600
From: Rob Herring <robh@...nel.org>
To: Wei Xu <xuwei5@...ilicon.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] ARM: dts: hisilicon: Fix "status" values
The defined value for "status" is "disabled", not "disable".
Signed-off-by: Rob Herring <robh@...nel.org>
---
arch/arm/boot/dts/hisilicon/hi3519.dtsi | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/hisilicon/hi3519.dtsi b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
index c524c854d319..a42b71cdc5d7 100644
--- a/arch/arm/boot/dts/hisilicon/hi3519.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
@@ -54,7 +54,7 @@ uart0: serial@...00000 {
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
clock-names = "uartclk", "apb_pclk";
- status = "disable";
+ status = "disabled";
};
uart1: serial@...01000 {
@@ -63,7 +63,7 @@ uart1: serial@...01000 {
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
clock-names = "uartclk", "apb_pclk";
- status = "disable";
+ status = "disabled";
};
uart2: serial@...02000 {
@@ -72,7 +72,7 @@ uart2: serial@...02000 {
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
clock-names = "uartclk", "apb_pclk";
- status = "disable";
+ status = "disabled";
};
uart3: serial@...03000 {
@@ -81,7 +81,7 @@ uart3: serial@...03000 {
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
clock-names = "uartclk", "apb_pclk";
- status = "disable";
+ status = "disabled";
};
uart4: serial@...04000 {
@@ -90,7 +90,7 @@ uart4: serial@...04000 {
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
clock-names = "uartclk", "apb_pclk";
- status = "disable";
+ status = "disabled";
};
dual_timer0: timer@...00000 {
@@ -100,7 +100,7 @@ dual_timer0: timer@...00000 {
reg = <0x12000000 0x1000>;
clocks = <&clk_3m>;
clock-names = "apb_pclk";
- status = "disable";
+ status = "disabled";
};
dual_timer1: timer@...01000 {
@@ -110,7 +110,7 @@ dual_timer1: timer@...01000 {
reg = <0x12001000 0x1000>;
clocks = <&clk_3m>;
clock-names = "apb_pclk";
- status = "disable";
+ status = "disabled";
};
dual_timer2: timer@...02000 {
@@ -120,7 +120,7 @@ dual_timer2: timer@...02000 {
reg = <0x12002000 0x1000>;
clocks = <&clk_3m>;
clock-names = "apb_pclk";
- status = "disable";
+ status = "disabled";
};
spi_bus0: spi@...20000 {
@@ -132,7 +132,7 @@ spi_bus0: spi@...20000 {
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
spi_bus1: spi@...21000 {
@@ -144,7 +144,7 @@ spi_bus1: spi@...21000 {
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
spi_bus2: spi@...22000 {
@@ -156,7 +156,7 @@ spi_bus2: spi@...22000 {
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
sysctrl: system-controller@...20000 {
--
2.40.1
Powered by blists - more mailing lists