linux-kernel - Re: [PATCH] ata: libata-scsi: fix bogus SCSI sense after abort

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <3373decb-56dc-2e18-5c3b-778f344bab4d@kernel.org>
Date:   Mon, 26 Jun 2023 16:51:47 +0900
From:   Damien Le Moal <dlemoal@...nel.org>
To:     Hannes Reinecke <hare@...e.de>, Lorenz Brun <lorenz@...n.one>
Cc:     linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ata: libata-scsi: fix bogus SCSI sense after abort

On 6/26/23 16:46, Hannes Reinecke wrote:
> On 6/26/23 09:29, Damien Le Moal wrote:
>> On 6/24/23 03:19, Lorenz Brun wrote:
>>> Since commit 058e55e120ca which fixed that commands without valid
>>> error/status codes did not result in any sense error, the returned sense
>>> errors were completely bogus as ata_to_sense_error did not have valid
>>> inputs in the first place.
>>>
>>> For example the following ATA error
>>>
>>> exception Emask 0x10 SAct 0x20c000 SErr 0x280100 action 0x6 frozen
>>> irq_stat 0x08000000, interface fatal error
>>> SError: { UnrecovData 10B8B BadCRC }
>>> failed command: READ FPDMA QUEUED
>>> cmd 60/e0:70:20:0a:00/00:00:00:00:00/40 tag 14 ncq dma 114688 in
>>> res 40/00:ac:20:5e:50/00:00:5d:01:00/40 Emask 0x10 (ATA bus error)
>>> status: { DRDY }
>>>
>>> got turned into the following nonsensical SCSI error
>>>
>>> FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
>>> Sense Key : Illegal Request [current]
>>> Add. Sense: Unaligned write command
>>> CDB: Read(16) 88 00 00 00 00 00 00 00 0a 20 00 00 00 e0 00 00
>>>
>>> This has nothing to do with an unaligned write command, but is due to an
>>> ATA EH-triggered abort. But ata_to_sense_error only knows about
>>> status and error, both of which aren't even valid here as the command
>>> has been aborted.
>>>
>>> Add an additional section to ata_gen_ata_sense which handles
>>> errors not coming from the device first, before calling into
>>> ata_to_sense_error.
>>>
>>> According to the SAT-5 spec a reset should cause a Unit Attention event,
>>> which the SCSI subsystem should handle to retry its commands but I
>>> am not sure how much of that infra is present in Linux's SCSI layer, so
>>> this is a simpler solution.
>>>
>>> Signed-off-by: Lorenz Brun <lorenz@...n.one>
>>> ---
>>>   drivers/ata/libata-scsi.c | 16 ++++++++++++++++
>>>   1 file changed, 16 insertions(+)
>>>
>>> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
>>> index 551077cea4e4..61c6a4e8123a 100644
>>> --- a/drivers/ata/libata-scsi.c
>>> +++ b/drivers/ata/libata-scsi.c
>>> @@ -13,6 +13,7 @@
>>>    *  - http://www.t13.org/
>>>    */
>>>   
>>> +#include "scsi/scsi_proto.h"
>>>   #include <linux/compat.h>
>>>   #include <linux/slab.h>
>>>   #include <linux/kernel.h>
>>> @@ -1013,6 +1014,21 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc)
>>>   		ata_scsi_set_sense(dev, cmd, NOT_READY, 0x04, 0x21);
>>>   		return;
>>>   	}
>>> +	if (qc->err_mask & (AC_ERR_HSM | AC_ERR_ATA_BUS | AC_ERR_HOST_BUS |
>>> +		AC_ERR_SYSTEM | AC_ERR_OTHER)) {
>>
>> Did you check SATA IO specs and/or AHCI to see if that says anything about these
>> ? And I wonder if we should check if we have something in tf->status and
>> tf->error...
>>
> We really should. The above combination of error masks seems pretty 
> arbitrary, as actually you do _not_ want to check for there error mask, 
> but rather for the fact that the sense code is bogus.
> So shouldn't we rather test for that one directly?
> 
>>> +		/* Command aborted because of some issue with the ATA subsystem
>>> +		 * Should technically cause unit attention, but this is better
>>> +		 * than nothing, which results in nonsensical errors.
>>> +		 * POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
>>> +		 */
>>
>> Multi-line comment style: start with a "/*" line please. The phrasing of the
>> comment is not very clear. Maybe something like:
>>
>> 		/*
>> 		 * If the command aborted because of some issue with the
>> 		 * adapter or link, report a POWER ON, RESET, OR BUS DEVICE
>> 		 * RESET OCCURRED error.
>> 		 */
>>
>> Did you check that all of the above error flags lead to a drive reset ? The
>> issue I have with this is that the drive reset is triggered by libata EH after
>> it got these bad errors but the sense data you use here normally indicate that
>> the reset was initiated by the adapter or the drive. Not sure this is ideal.
>>
> Yes. We should rather return a DID_RESET status instead of any made up 
> sense code for which we don't have a good justification, and which might 
> get invalidated by future SATL versions.

Need to check what SAT says about all this as well... Will do some spec reading.
The default sense code for when we cannot figure out proper sense based on
status and error is ABORTED COMMAND/0/0. That seems good enough to me. The issue
may be that we do not reach that default case when we have bogus status/error.
The test:

	if (qc->err_mask ||
	    tf->status & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {

in ata_gen_ata_sense() is sketchy... Why is that qc->err_mask there ? It does
not seem needed at all. If removed, then we would fall back to aborted command
default.

> 
> Cheers,
> 
> Hannes

-- 
Damien Le Moal
Western Digital Research