Date:   Mon, 26 Jun 2023 12:13:20 -0400
From:   Eric DeVolder <eric.devolder@...cle.com>
To:     linux@...linux.org.uk, catalin.marinas@....com, will@...nel.org,
        chenhuacai@...nel.org, geert@...ux-m68k.org,
        tsbogend@...ha.franken.de, James.Bottomley@...senPartnership.com,
        deller@....de, ysato@...rs.sourceforge.jp, dalias@...c.org,
        glaubitz@...sik.fu-berlin.de, tglx@...utronix.de, mingo@...hat.com,
        bp@...en8.de, dave.hansen@...ux.intel.com, x86@...nel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-ia64@...r.kernel.org, loongarch@...ts.linux.dev,
        linux-m68k@...ts.linux-m68k.org, linux-mips@...r.kernel.org,
        linux-parisc@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org,
        linux-riscv@...ts.infradead.org, linux-s390@...r.kernel.org,
        linux-sh@...r.kernel.org
Cc:     kernel@...0n.name, mpe@...erman.id.au, npiggin@...il.com,
        christophe.leroy@...roup.eu, paul.walmsley@...ive.com,
        palmer@...belt.com, aou@...s.berkeley.edu, hca@...ux.ibm.com,
        gor@...ux.ibm.com, agordeev@...ux.ibm.com,
        borntraeger@...ux.ibm.com, svens@...ux.ibm.com, hpa@...or.com,
        keescook@...omium.org, paulmck@...nel.org, peterz@...radead.org,
        frederic@...nel.org, akpm@...ux-foundation.org, ardb@...nel.org,
        samitolvanen@...gle.com, juerg.haefliger@...onical.com,
        arnd@...db.de, rmk+kernel@...linux.org.uk,
        linus.walleij@...aro.org, sebastian.reichel@...labora.com,
        rppt@...nel.org, kirill.shutemov@...ux.intel.com,
        anshuman.khandual@....com, ziy@...dia.com, masahiroy@...nel.org,
        ndesaulniers@...gle.com, mhiramat@...nel.org, ojeda@...nel.org,
        thunder.leizhen@...wei.com, xin3.li@...el.com, tj@...nel.org,
        gregkh@...uxfoundation.org, tsi@...oix.net, bhe@...hat.com,
        hbathini@...ux.ibm.com, sourabhjain@...ux.ibm.com,
        eric.devolder@...cle.com, boris.ostrovsky@...cle.com,
        konrad.wilk@...cle.com
Subject: [PATCH v3 01/13] kexec: consolidate kexec and crash options into kernel/Kconfig.kexec

The config options for kexec and crash features are consolidated
into new file kernel/Kconfig.kexec. Under the "General Setup" submenu
is a new submenu "Kexec and crash handling". All the kexec and
crash options that were once in the arch-dependent submenu "Processor
type and features" are now consolidated in the new submenu.

The following options are impacted:

 - KEXEC
 - KEXEC_FILE
 - KEXEC_SIG
 - KEXEC_SIG_FORCE
 - KEXEC_BZIMAGE_VERIFY_SIG
 - KEXEC_JUMP
 - CRASH_DUMP

The three main options are KEXEC, KEXEC_FILE and CRASH_DUMP.

Architectures specify support of certain KEXEC and CRASH features with
similarly named new ARCH_SUPPORTS_<option> config options.

Architectures can utilize the new ARCH_SELECTS_<option> config
options to specify additional components when <option> is enabled.

To summarize, the ARCH_SUPPORTS_<option> permits the <option> to be
enabled, and the ARCH_SELECTS_<option> handles side effects (ie.
select statements).

Signed-off-by: Eric DeVolder <eric.devolder@...cle.com>
---
 arch/Kconfig         |  13 -----
 init/Kconfig         |   2 +
 kernel/Kconfig.kexec | 110 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 112 insertions(+), 13 deletions(-)
 create mode 100644 kernel/Kconfig.kexec

diff --git a/arch/Kconfig b/arch/Kconfig
index 205fd23e0cad..a37730679730 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -11,19 +11,6 @@ source "arch/$(SRCARCH)/Kconfig"
 
 menu "General architecture-dependent options"
 
-config CRASH_CORE
-	bool
-
-config KEXEC_CORE
-	select CRASH_CORE
-	bool
-
-config KEXEC_ELF
-	bool
-
-config HAVE_IMA_KEXEC
-	bool
-
 config ARCH_HAS_SUBPAGE_FAULTS
 	bool
 	help
diff --git a/init/Kconfig b/init/Kconfig
index 32c24950c4ce..4424447e23a5 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1917,6 +1917,8 @@ config BINDGEN_VERSION_TEXT
 config TRACEPOINTS
 	bool
 
+source "kernel/Kconfig.kexec"
+
 endmenu		# General setup
 
 source "arch/Kconfig"
diff --git a/kernel/Kconfig.kexec b/kernel/Kconfig.kexec
new file mode 100644
index 000000000000..5d576ddfd999
--- /dev/null
+++ b/kernel/Kconfig.kexec
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menu "Kexec and crash features"
+
+config CRASH_CORE
+	bool
+
+config KEXEC_CORE
+	select CRASH_CORE
+	bool
+
+config KEXEC_ELF
+	bool
+
+config HAVE_IMA_KEXEC
+	bool
+
+config KEXEC
+	bool "Enable kexec system call"
+	default ARCH_DEFAULT_KEXEC
+	depends on ARCH_SUPPORTS_KEXEC
+	select KEXEC_CORE
+	help
+	  kexec is a system call that implements the ability to shutdown your
+	  current kernel, and to start another kernel. It is like a reboot
+	  but it is independent of the system firmware. And like a reboot
+	  you can start any kernel with it, not just Linux.
+
+	  The name comes from the similarity to the exec system call.
+
+	  It is an ongoing process to be certain the hardware in a machine
+	  is properly shutdown, so do not be surprised if this code does not
+	  initially work for you. As of this writing the exact hardware
+	  interface is strongly in flux, so no good recommendation can be
+	  made.
+
+config KEXEC_FILE
+	bool "Enable kexec file based system call"
+	depends on ARCH_SUPPORTS_KEXEC_FILE
+	select KEXEC_CORE
+	help
+	  This is new version of kexec system call. This system call is
+	  file based and takes file descriptors as system call argument
+	  for kernel and initramfs as opposed to list of segments as
+	  accepted by kexec system call.
+
+config KEXEC_SIG
+	bool "Verify kernel signature during kexec_file_load() syscall"
+	depends on KEXEC_FILE
+	help
+	  This option makes the kexec_file_load() syscall check for a valid
+	  signature of the kernel image. The image can still be loaded without
+	  a valid signature unless you also enable KEXEC_SIG_FORCE, though if
+	  there's a signature that we can check, then it must be valid.
+
+	  In addition to this option, you need to enable signature
+	  verification for the corresponding kernel image type being
+	  loaded in order for this to work.
+
+config KEXEC_SIG_FORCE
+	bool "Require a valid signature in kexec_file_load() syscall"
+	depends on KEXEC_SIG
+	help
+	  This option makes kernel signature verification mandatory for
+	  the kexec_file_load() syscall.
+
+config KEXEC_IMAGE_VERIFY_SIG
+	bool "Enable Image signature verification support"
+	default ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG
+	depends on KEXEC_SIG
+	depends on EFI && SIGNED_PE_FILE_VERIFICATION
+	help
+	  Enable Image signature verification support.
+
+config KEXEC_BZIMAGE_VERIFY_SIG
+	bool "Enable bzImage signature verification support"
+	depends on KEXEC_SIG
+	depends on SIGNED_PE_FILE_VERIFICATION
+	select SYSTEM_TRUSTED_KEYRING
+	help
+	  Enable bzImage signature verification support.
+
+config KEXEC_JUMP
+	bool "kexec jump"
+	depends on KEXEC && HIBERNATION
+	depends on ARCH_SUPPORTS_KEXEC_JUMP
+	help
+	  Jump between original kernel and kexeced kernel and invoke
+	  code in physical address mode via KEXEC
+
+config CRASH_DUMP
+	bool "kernel crash dumps"
+	depends on ARCH_SUPPORTS_CRASH_DUMP
+	select KEXEC_CORE
+	select CRASH_CORE
+	help
+	  Generate crash dump after being started by kexec.
+	  This should be normally only set in special crash dump kernels
+	  which are loaded in the main kernel with kexec-tools into
+	  a specially reserved region and then later executed after
+	  a crash by kdump/kexec. The crash dump kernel must be compiled
+	  to a memory address not used by the main kernel or BIOS using
+	  PHYSICAL_START, or it must be built as a relocatable image
+	  (CONFIG_RELOCATABLE=y).
+	  For more details see Documentation/admin-guide/kdump/kdump.rst
+
+	  For s390, this option also enables zfcpdump.
+	  See also <file:Documentation/s390/zfcpdump.rst>
+
+endmenu
-- 
2.31.1

Powered by blists - more mailing lists