[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1687827692-6181-2-git-send-email-quic_krichai@quicinc.com>
Date: Tue, 27 Jun 2023 06:31:29 +0530
From: Krishna chaitanya chundru <quic_krichai@...cinc.com>
To: manivannan.sadhasivam@...aro.org
Cc: helgaas@...nel.org, linux-pci@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
quic_vbadigan@...cinc.com, quic_nitegupt@...cinc.com,
quic_skananth@...cinc.com, quic_ramkri@...cinc.com,
krzysztof.kozlowski@...aro.org,
Krishna chaitanya chundru <quic_krichai@...cinc.com>,
Manivannan Sadhasivam <mani@...nel.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Rob Herring <robh@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS)
Subject: [PATCH v5 1/3] dt-bindings: PCI: qcom: ep: Add interconnects path
Some platforms may not boot if a device driver doesn't
initialize the interconnect path. Mostly it is handled
by the bootloader but we have starting to see cases
where bootloader simply ignores them.
Add the "pcie-mem" interconnect path as a required property
to the bindings.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@...cinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
index 8111122..bc32e13 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
@@ -71,6 +71,13 @@ properties:
description: GPIO used as WAKE# output signal
maxItems: 1
+ interconnects:
+ maxItems: 1
+
+ interconnect-names:
+ items:
+ - const: pcie-mem
+
resets:
maxItems: 1
@@ -98,6 +105,8 @@ required:
- interrupts
- interrupt-names
- reset-gpios
+ - interconnects
+ - interconnect-names
- resets
- reset-names
- power-domains
@@ -167,7 +176,9 @@ examples:
- |
#include <dt-bindings/clock/qcom,gcc-sdx55.h>
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interconnect/qcom,sdx55.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+
pcie_ep: pcie-ep@...0000 {
compatible = "qcom,sdx55-pcie-ep";
reg = <0x01c00000 0x3000>,
@@ -194,6 +205,8 @@ examples:
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "global", "doorbell";
+ interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>;
+ interconnect-names = "pcie-mem";
reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
resets = <&gcc GCC_PCIE_BCR>;
--
2.7.4
Powered by blists - more mailing lists