lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230627104033.3345659-2-abel.vesa@linaro.org>
Date:   Tue, 27 Jun 2023 13:40:33 +0300
From:   Abel Vesa <abel.vesa@...aro.org>
To:     "Rafael J . Wysocki" <rafael@...nel.org>,
        Kevin Hilman <khilman@...nel.org>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        avel Machek <pavel@....cz>, Len Brown <len.brown@...el.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Andy Gross <agross@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Mike Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Taniya Das <tdas@....qualcomm.com>
Cc:     linux-pm@...r.kernel.org,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        linux-arm-msm@...r.kernel.org
Subject: [RFC PATCH 2/2] clk: qcom: gdsc: Add support for set_hwmode_dev

Implement the GDSC specific genpd set_hwmode_dev callback in order to
switch the HW control on or off. For any GDSC that supports HW control
set this callback in order to allow its consumers to control it.

Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
 drivers/clk/qcom/gdsc.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
index 5358e28122ab..9a04bf2e4379 100644
--- a/drivers/clk/qcom/gdsc.c
+++ b/drivers/clk/qcom/gdsc.c
@@ -314,6 +314,26 @@ static int gdsc_enable(struct generic_pm_domain *domain)
 	return 0;
 }
 
+static int gdsc_set_hwmode_dev(struct generic_pm_domain *domain,
+			       struct device *dev, bool enable)
+{
+	int ret = gdsc_hwctrl(domain_to_gdsc(domain), enable);
+
+	if (ret)
+		goto out;
+
+	/*
+	 * Wait for the GDSC to go through a power down and
+	 * up cycle.  In case there is a status polling going on
+	 * before the power cycle is completed it might read an
+	 * wrong status value.
+	 */
+	udelay(1);
+
+out:
+	return ret;
+}
+
 static int gdsc_disable(struct generic_pm_domain *domain)
 {
 	struct gdsc *sc = domain_to_gdsc(domain);
@@ -451,6 +471,8 @@ static int gdsc_init(struct gdsc *sc)
 		sc->pd.power_off = gdsc_disable;
 	if (!sc->pd.power_on)
 		sc->pd.power_on = gdsc_enable;
+	if (sc->flags & HW_CTRL)
+		sc->pd.set_hwmode_dev = gdsc_set_hwmode_dev;
 
 	ret = pm_genpd_init(&sc->pd, NULL, !on);
 	if (ret)
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ