| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230627-topic-6375_l3-v1-1-9cb03ef05150@linaro.org>
Date: Tue, 27 Jun 2023 16:07:37 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Marijn Suijten <marijn.suijten@...ainline.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Konrad Dybcio <konrad.dybcio@...aro.org>
Subject: [PATCH] arm64: dts: qcom: sm6375: Set up L3 scaling
Add the CPU OPP tables including core frequency and L3 bus frequency.
The L3 throughput values were chosen by studying the frequencies
available in HW LUT and picking the highest one that's less than the
CPU frequency. They will be replaced with a dynamic, bwmon-style
decision maker once support for MEMLAT is introduced upstream.
Available values from the HW LUT:
300000
556800
652800
768000
844800
921600
1171200
1382400
1497600
This commit dramatically improves overall performance of the system.
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
arch/arm64/boot/dts/qcom/sm6375.dtsi | 127 +++++++++++++++++++++++++++++++++++
1 file changed, 127 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 3dba34210a6d..927aa59d4a07 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/qcom,sm6375-gpucc.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
@@ -45,6 +46,8 @@ CPU0: cpu@0 {
enable-method = "psci";
next-level-cache = <&L2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
power-domains = <&CPU_PD0>;
power-domain-names = "psci";
#cooling-cells = <2>;
@@ -69,6 +72,8 @@ CPU1: cpu@100 {
enable-method = "psci";
next-level-cache = <&L2_100>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
power-domains = <&CPU_PD1>;
power-domain-names = "psci";
#cooling-cells = <2>;
@@ -88,6 +93,8 @@ CPU2: cpu@200 {
enable-method = "psci";
next-level-cache = <&L2_200>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
power-domains = <&CPU_PD2>;
power-domain-names = "psci";
#cooling-cells = <2>;
@@ -107,6 +114,8 @@ CPU3: cpu@300 {
enable-method = "psci";
next-level-cache = <&L2_300>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
power-domains = <&CPU_PD3>;
power-domain-names = "psci";
#cooling-cells = <2>;
@@ -126,6 +135,8 @@ CPU4: cpu@400 {
enable-method = "psci";
next-level-cache = <&L2_400>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
power-domains = <&CPU_PD4>;
power-domain-names = "psci";
#cooling-cells = <2>;
@@ -145,6 +156,8 @@ CPU5: cpu@500 {
enable-method = "psci";
next-level-cache = <&L2_500>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
power-domains = <&CPU_PD5>;
power-domain-names = "psci";
#cooling-cells = <2>;
@@ -164,6 +177,8 @@ CPU6: cpu@600 {
enable-method = "psci";
next-level-cache = <&L2_600>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu6_opp_table>;
+ interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
power-domains = <&CPU_PD6>;
power-domain-names = "psci";
#cooling-cells = <2>;
@@ -183,6 +198,8 @@ CPU7: cpu@700 {
enable-method = "psci";
next-level-cache = <&L2_700>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu6_opp_table>;
+ interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
power-domains = <&CPU_PD7>;
power-domain-names = "psci";
#cooling-cells = <2>;
@@ -300,6 +317,116 @@ memory@...00000 {
reg = <0x0 0x80000000 0x0 0x0>;
};
+ cpu0_opp_table: opp-table-cpu0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-peak-kBps = <(300000 * 32)>;
+ };
+
+ opp-576000000 {
+ opp-hz = /bits/ 64 <576000000>;
+ opp-peak-kBps = <(556800 * 32)>;
+ };
+
+ opp-691200000 {
+ opp-hz = /bits/ 64 <691200000>;
+ opp-peak-kBps = <(652800 * 32)>;
+ };
+
+ opp-940800000 {
+ opp-hz = /bits/ 64 <940800000>;
+ opp-peak-kBps = <(921600 * 32)>;
+ };
+
+ opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ opp-peak-kBps = <(921600 * 32)>;
+ };
+
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ opp-peak-kBps = <(1171200 * 32)>;
+ };
+
+ opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ opp-peak-kBps = <(1497600 * 32)>;
+ };
+
+ opp-1651200000 {
+ opp-hz = /bits/ 64 <1651200000>;
+ opp-peak-kBps = <(1497600 * 32)>;
+ };
+
+ opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ opp-peak-kBps = <(1497600 * 32)>;
+ };
+
+ opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ opp-peak-kBps = <(1497600 * 32)>;
+ };
+ };
+
+ cpu6_opp_table: opp-table-cpu6 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-691200000 {
+ opp-hz = /bits/ 64 <691200000>;
+ opp-peak-kBps = <(556800 * 32)>;
+ };
+
+ opp-940800000 {
+ opp-hz = /bits/ 64 <940800000>;
+ opp-peak-kBps = <(921600 * 32)>;
+ };
+
+ opp-1228800000 {
+ opp-hz = /bits/ 64 <1228800000>;
+ opp-peak-kBps = <(1171200 * 32)>;
+ };
+
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ opp-peak-kBps = <(1382400 * 32)>;
+ };
+
+ opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ opp-peak-kBps = <(1497600 * 32)>;
+ };
+
+ opp-1651200000 {
+ opp-hz = /bits/ 64 <1651200000>;
+ opp-peak-kBps = <(1497600 * 32)>;
+ };
+
+ opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ opp-peak-kBps = <(1497600 * 32)>;
+ };
+
+ opp-1900800000 {
+ opp-hz = /bits/ 64 <1900800000>;
+ opp-peak-kBps = <(1497600 * 32)>;
+ };
+
+ opp-2054400000 {
+ opp-hz = /bits/ 64 <2054400000>;
+ opp-peak-kBps = <(1497600 * 32)>;
+ };
+
+ opp-2208000000 {
+ opp-hz = /bits/ 64 <2208000000>;
+ opp-peak-kBps = <(1497600 * 32)>;
+ };
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
---
base-commit: 53cdf865f90ba922a854c65ed05b519f9d728424
change-id: 20230627-topic-6375_l3-48b03d0e47db
Best regards,
--
Konrad Dybcio <konrad.dybcio@...aro.org>
Powered by blists - more mailing lists