[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZJr6r-cdDCFDc89R@hovoldconsulting.com>
Date: Tue, 27 Jun 2023 17:05:19 +0200
From: Johan Hovold <johan@...nel.org>
To: Krishna Kurapati <quic_kriskura@...cinc.com>
Cc: Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Felipe Balbi <balbi@...nel.org>,
Wesley Cheng <quic_wcheng@...cinc.com>,
linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
quic_pkondeti@...cinc.com, quic_ppratap@...cinc.com,
quic_jackp@...cinc.com, quic_harshq@...cinc.com,
ahalaney@...hat.com, quic_shazhuss@...cinc.com
Subject: Re: [PATCH v9 07/10] usb: dwc3: qcom: Add multiport suspend/resume
support for wrapper
On Wed, Jun 21, 2023 at 10:06:25AM +0530, Krishna Kurapati wrote:
> QCOM SoC SA8295P's tertiary quad port controller supports 2 HS+SS
> ports and 2 HS only ports. Add support for configuring PWR_EVENT_IRQ's
> for all the ports during suspend/resume.
Please be more specific here. You don't seem to be configuring anything.
> Signed-off-by: Krishna Kurapati <quic_kriskura@...cinc.com>
> ---
> drivers/usb/dwc3/dwc3-qcom.c | 48 +++++++++++++++++++++++++++++++-----
> 1 file changed, 42 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 3ab48a6925fe..699485a85233 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -37,7 +37,11 @@
> #define PIPE3_PHYSTATUS_SW BIT(3)
> #define PIPE_UTMI_CLK_DIS BIT(8)
>
> -#define PWR_EVNT_IRQ_STAT_REG 0x58
> +#define PWR_EVNT_IRQ1_STAT_REG 0x58
> +#define PWR_EVNT_IRQ2_STAT_REG 0x1dc
> +#define PWR_EVNT_IRQ3_STAT_REG 0x228
> +#define PWR_EVNT_IRQ4_STAT_REG 0x238
> +
> #define PWR_EVNT_LPM_IN_L2_MASK BIT(4)
> #define PWR_EVNT_LPM_OUT_L2_MASK BIT(5)
>
> @@ -93,6 +97,13 @@ struct dwc3_qcom {
> struct icc_path *icc_path_apps;
> };
>
> +static u32 pwr_evnt_irq_stat_reg_offset[4] = {
> + PWR_EVNT_IRQ1_STAT_REG,
> + PWR_EVNT_IRQ2_STAT_REG,
> + PWR_EVNT_IRQ3_STAT_REG,
> + PWR_EVNT_IRQ4_STAT_REG,
> +};
> +
> static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
> {
> u32 reg;
> @@ -417,17 +428,37 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq[0], 0);
> }
>
> +static u8 dwc3_qcom_get_port_info(struct dwc3_qcom *qcom)
"port_info" is not very specific, call it get_num_ports() or similar.
> +{
> + struct dwc3 __maybe_unused *dwc = platform_get_drvdata(qcom->dwc3);
__maybe unused makes no sense here.
> +
> + if (dwc3_qcom_is_host(qcom))
> + return dwc->num_usb2_ports;
Here you're accessing the core driver data again, which we want to
avoid going forward so this at least warrants a FIXME to rework this as
well.
> +
> + /*
> + * If not in host mode, either dwc was not probed
> + * or we are in device mode, either case checking for
> + * only first pwr event irq would suffice.
Rewrap comment at 80 columns.
> + */
> +
> + return 1;
> +}
> +
> static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
> {
> u32 val;
> int i, ret;
> + u8 num_ports;
Move first.
> if (qcom->is_suspended)
> return 0;
>
> - val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
> - if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
> + num_ports = dwc3_qcom_get_port_info(qcom);
> + for (i = 0; i < num_ports; i++) {
> + val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg_offset[i]);
> + if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
> dev_err(qcom->dev, "HS-PHY not in L2\n");
This line is not indented properly.
Make sure to run checkpatch before submitting so that I don't have to
point out things like this again.
> + }
>
> for (i = qcom->num_clocks - 1; i >= 0; i--)
> clk_disable_unprepare(qcom->clks[i]);
> @@ -452,12 +483,14 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
>
> static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
> {
> + int num_ports;
> int ret;
> int i;
>
> if (!qcom->is_suspended)
> return 0;
>
> + num_ports = dwc3_qcom_get_port_info(qcom);
Move below to where you use num_ports.
> if (dwc3_qcom_is_host(qcom) && wakeup)
> dwc3_qcom_disable_interrupts(qcom);
>
> @@ -474,9 +507,12 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
> if (ret)
> dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
>
> - /* Clear existing events from PHY related to L2 in/out */
No need to move the comment.
> - dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
> - PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
> + for (i = 0; i < num_ports; i++) {
> + /* Clear existing events from PHY related to L2 in/out */
> + dwc3_qcom_setbits(qcom->qscratch_base,
> + pwr_evnt_irq_stat_reg_offset[i],
> + PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
Indent continuation lines at least two tabs further than the previous
line.
> + }
>
> qcom->is_suspended = false;
Johan
Powered by blists - more mailing lists