[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230627150718.GJ5490@thinkpad>
Date: Tue, 27 Jun 2023 20:37:18 +0530
From: Manivannan Sadhasivam <mani@...nel.org>
To: Pavan Kondeti <quic_pkondeti@...cinc.com>
Cc: Krishna chaitanya chundru <quic_krichai@...cinc.com>,
manivannan.sadhasivam@...aro.org, helgaas@...nel.org,
linux-pci@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org, quic_vbadigan@...cinc.com,
quic_nitegupt@...cinc.com, quic_skananth@...cinc.com,
quic_ramkri@...cinc.com, krzysztof.kozlowski@...aro.org,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Rob Herring <robh@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>
Subject: Re: [PATCH v5 3/3] PCI: qcom-ep: Add ICC bandwidth voting support
On Tue, Jun 27, 2023 at 12:05:23PM +0530, Pavan Kondeti wrote:
> On Tue, Jun 27, 2023 at 06:31:31AM +0530, Krishna chaitanya chundru wrote:
> > +static void qcom_pcie_ep_icc_update(struct qcom_pcie_ep *pcie_ep)
> > +{
> > + struct dw_pcie *pci = &pcie_ep->pci;
> > + u32 offset, status, bw;
> > + int speed, width;
> > + int ret;
> > +
> > + if (!pcie_ep->icc_mem)
> > + return;
> > +
>
> Is this check needed? interconnect is added as required property and
> probe is failed if interconnect get fails. qcom_pcie_enable_resources()
> which gets called before enabling this interrupt is assuming that
> interconnect available.
>
Even though the current binding requires interconnect, driver needs to be
backwards compatible with old dts where there was no interconnect.
Also, devm_of_icc_get() will return NULL if the property is missing in dts. But
we are just checking for IS_ERR not IS_ERR_OR_NULL. So this check is required.
- Mani
>
> > + offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> > + status = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
> > +
> > + speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, status);
> > + width = FIELD_GET(PCI_EXP_LNKSTA_NLW, status);
> > +
> > + switch (speed) {
> > + case 1:
> > + bw = MBps_to_icc(PCIE_GEN1_BW_MBPS);
> > + break;
> > + case 2:
> > + bw = MBps_to_icc(PCIE_GEN2_BW_MBPS);
> > + break;
> > + case 3:
> > + bw = MBps_to_icc(PCIE_GEN3_BW_MBPS);
> > + break;
> > + default:
> > + dev_warn(pci->dev, "using default GEN4 bandwidth\n");
> > + fallthrough;
> > + case 4:
> > + bw = MBps_to_icc(PCIE_GEN4_BW_MBPS);
> > + break;
> > + }
> > +
> > + ret = icc_set_bw(pcie_ep->icc_mem, 0, width * bw);
> > + if (ret) {
> > + dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
> > + ret);
> > + }
>
> Are you not seeing the below warning from checkpatch?
>
> WARNING: braces {} are not necessary for single statement blocks
>
> > +}
> > +
> > static int qcom_pcie_enable_resources(struct qcom_pcie_ep *pcie_ep)
> > {
> > int ret;
> > + struct dw_pcie *pci = &pcie_ep->pci;
> >
> > ret = clk_bulk_prepare_enable(pcie_ep->num_clks, pcie_ep->clks);
> > if (ret)
> > @@ -277,6 +331,20 @@ static int qcom_pcie_enable_resources(struct qcom_pcie_ep *pcie_ep)
> > if (ret)
> > goto err_phy_exit;
> >
> > + /*
> > + * Some Qualcomm platforms require interconnect bandwidth constraints
> > + * to be set before enabling interconnect clocks.
> > + *
> > + * Set an initial peak bandwidth corresponding to single-lane Gen 1
> > + * for the pcie-mem path.
> > + */
> > + ret = icc_set_bw(pcie_ep->icc_mem, 0, MBps_to_icc(PCIE_GEN1_BW_MBPS));
> > + if (ret) {
> > + dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
> > + ret);
> > + goto err_phy_exit;
> > + }
> > +
> > return 0;
>
> Thanks,
> Pavan
--
மணிவண்ணன் சதாசிவம்
Powered by blists - more mailing lists