| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230628120201.GA10364@alpha.franken.de>
Date: Wed, 28 Jun 2023 14:02:01 +0200
From: Thomas Bogendoerfer <tsbogend@...ha.franken.de>
To: torvalds@...ux-foundation.org
Cc: linux-mips@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [GIT PULL] MIPS changes for v6.5
Hi Linus,
there will be small conflict with the slab tree. Resolution is to
keep CONFIG_SLAB removed. See also
https://lore.kernel.org/all/20230613151008.28167567@canb.auug.org.au/
Other than that my test merge didn't show anything.
Thomas.
The following changes since commit 4897a898a216058dec55e5e5902534e6e224fcdf:
mips: Move initrd_start check after initrd address sanitisation. (2023-05-23 11:01:38 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/ tags/mips_6.5
for you to fetch changes up to e47084e116fccaa43644360d7c0b997979abce3e:
MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000 (2023-06-26 09:18:43 +0200)
----------------------------------------------------------------
- added support for TP-Link HC220 G5 v1
- added support for Wifi/Bluetooth on CI20
- reworked Ralink clock and reset handling
- cleanups and fixes
----------------------------------------------------------------
Aidan MacDonald (2):
mips: dts: ingenic: Remove unnecessary AIC clocks
mips: dts: ingenic: x1000: Add AIC device tree node
Arnd Bergmann (2):
mips: provide unxlate_dev_mem_ptr() in asm/io.h
mips: asm-offsets: add missing prototypes
Binbin Zhou (2):
MIPS: Loongson64: DTS: Add RTC support to LS7A PCH
MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000
Franziska Naepelt (1):
mips: Fix spacing issue
Gustavo A. R. Silva (1):
MIPS: dec: prom: Address -Warray-bounds warning
Jiaxun Yang (4):
MIPS: generic: Allow R5 CPUs to be selected
MIPS: cpu-features: Use boot_cpu_type for CPU type based features
MIPS: Rework smt cmdline parameters
MIPS: Select CONFIG_GENERIC_IDLE_POLL_SETUP
Keguang Zhang (1):
MIPS: Loongson32: Remove reset.c
Ladislav Michl (7):
MIPS: OCTEON: octeon-usb: add all register offsets
MIPS: OCTEON: octeon-usb: use bitfields for control register
MIPS: OCTEON: octeon-usb: use bitfields for host config register
MIPS: OCTEON: octeon-usb: use bitfields for shim register
MIPS: OCTEON: octeon-usb: move gpio config to separate function
MIPS: OCTEON: octeon-usb: introduce dwc3_octeon_{read,write}q
MIPS: OCTEON: octeon-usb: cleanup divider calculation
Liviu Dudau (2):
dt-bindings: mips: Add bindings for TP-Link HC220 G5 v1 board
mips: dts: ralink: Add support for TP-Link HC220 G5 v1 board
Maciej W. Rozycki (2):
MIPS: Alchemy: Enable PATA_PLATFORM support
Revert "MIPS: unhide PATA_PLATFORM"
Nathan Chancellor (2):
MIPS: Mark core_vpe_count() as __init
clk: ralink: mtmips: Fix uninitialized use of ret in mtmips_register_{fixed,factor}_clocks()
Paul Cercueil (13):
mips: ingenic: Remove useless __maybe_unused
mips: ingenic: Enable EXT/2 divider on JZ4750/55/60 if EXT is 24 MHz
MIPS: DTS: qi_lb60: Don't use unit address for regulators
MIPS: DTS: CI20: Fix regulators
MIPS: DTS: CI20: Fix ACT8600 regulator node names
MIPS: DTS: CI20: Add parent supplies to ACT8600 regulators
MIPS: DTS: CI20: Do not force-enable CIM and WiFi regulators
MIPS: DTS: CI20: Misc. cleanups
MIPS: DTS: CI20: Parent MSCMUX clock to MPLL
MIPS: DTS: CI20: Enable support for WiFi / Bluetooth
MIPS: configs: CI20: Regenerate defconfig
MIPS: configs: CI20: Enable WiFi / Bluetooth
MIPS: DTS: CI20: Raise VDDCORE voltage to 1.125 volts
Sergio Paracuellos (9):
dt-bindings: clock: add mtmips SoCs system controller
clk: ralink: add clock and reset driver for MTMIPS SoCs
mips: ralink: rt288x: remove clock related code
mips: ralink: rt305x: remove clock related code
mips: ralink: rt3883: remove clock related code
mips: ralink: mt7620: remove clock related code
mips: ralink: remove reset related code
mips: ralink: get cpu rate from new driver code
MAINTAINERS: add Mediatek MTMIPS Clock maintainer
Shiji Yang (4):
mips: pci-mt7620: do not print NFTS register value as error log
mips: pci-mt7620: use dev_info() to log PCIe device detection result
mips: ralink: introduce commonly used remap node function
mips: ralink: match all supported system controller compatible strings
Siarhei Volkau (1):
MIPS: uaccess: emulate Ingenic LXW/LXH/LXHU uaccess
Sui Jingfeng (1):
MIPS: Loongson64: loongson3_defconfig: Enable amdgpu drm driver
Thomas Bogendoerfer (2):
Merge tag 'mips-fixes_6.4_1' into mips-next
MIPS: mm: Remove special handling for OCTEON CPUs
Tony Lindgren (1):
mips: dts: ralink: mt7628a: Unify pinctrl-single pin group nodes
Uwe Kleine-König (1):
MIPS: PCI: Convert to platform remove callback returning void
Yu Zhao (1):
kvm/mips: update MAINTAINERS
Documentation/admin-guide/kernel-parameters.txt | 8 +-
.../bindings/clock/mediatek,mtmips-sysc.yaml | 64 ++
Documentation/devicetree/bindings/mips/ralink.yaml | 1 +
MAINTAINERS | 7 +-
arch/mips/Kconfig | 4 +-
arch/mips/alchemy/Kconfig | 1 +
arch/mips/boot/dts/ingenic/ci20.dts | 152 ++-
arch/mips/boot/dts/ingenic/jz4725b.dtsi | 7 +-
arch/mips/boot/dts/ingenic/jz4740.dtsi | 7 +-
arch/mips/boot/dts/ingenic/jz4770.dtsi | 5 +-
arch/mips/boot/dts/ingenic/qi_lb60.dts | 6 +-
arch/mips/boot/dts/ingenic/x1000.dtsi | 18 +
arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 7 +
arch/mips/boot/dts/loongson/ls7a-pch.dtsi | 7 +
arch/mips/boot/dts/ralink/Makefile | 3 +-
.../boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dts | 84 ++
arch/mips/boot/dts/ralink/mt7628a.dtsi | 40 +-
arch/mips/cavium-octeon/octeon-usb.c | 629 +++++------
arch/mips/configs/ci20_defconfig | 47 +-
arch/mips/configs/loongson3_defconfig | 7 +
arch/mips/generic/board-ingenic.c | 61 +-
arch/mips/include/asm/cpu-features.h | 4 +-
arch/mips/include/asm/dec/prom.h | 2 +-
arch/mips/include/asm/io.h | 1 +
arch/mips/include/asm/mach-loongson32/loongson1.h | 1 -
arch/mips/include/asm/mach-loongson32/regs-wdt.h | 15 -
arch/mips/include/asm/mach-ralink/mt7620.h | 35 -
arch/mips/include/asm/mach-ralink/rt288x.h | 10 -
arch/mips/include/asm/mach-ralink/rt305x.h | 21 -
arch/mips/include/asm/mach-ralink/rt3883.h | 8 -
arch/mips/include/asm/smp.h | 2 +
arch/mips/include/uapi/asm/inst.h | 33 +
arch/mips/kernel/asm-offsets.c | 14 +
arch/mips/kernel/smp-cps.c | 15 +-
arch/mips/kernel/smp-mt.c | 3 +-
arch/mips/kernel/smp.c | 18 +
arch/mips/kernel/unaligned.c | 41 +
arch/mips/loongson32/common/Makefile | 2 +-
arch/mips/loongson32/common/reset.c | 51 -
arch/mips/mm/tlbex.c | 24 +-
arch/mips/pci/pci-mt7620.c | 7 +-
arch/mips/pci/pci-xtalk-bridge.c | 8 +-
arch/mips/ralink/clk.c | 61 +-
arch/mips/ralink/common.h | 7 -
arch/mips/ralink/mt7620.c | 235 ----
arch/mips/ralink/mt7621.c | 9 -
arch/mips/ralink/of.c | 51 +-
arch/mips/ralink/reset.c | 61 --
arch/mips/ralink/rt288x.c | 40 -
arch/mips/ralink/rt305x.c | 87 --
arch/mips/ralink/rt3883.c | 53 -
arch/mips/sibyte/swarm/platform.c | 14 +-
drivers/char/mem.c | 7 -
drivers/clk/ralink/Kconfig | 7 +
drivers/clk/ralink/Makefile | 1 +
drivers/clk/ralink/clk-mtmips.c | 1117 ++++++++++++++++++++
56 files changed, 2093 insertions(+), 1137 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
create mode 100644 arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dts
delete mode 100644 arch/mips/include/asm/mach-loongson32/regs-wdt.h
delete mode 100644 arch/mips/loongson32/common/reset.c
create mode 100644 drivers/clk/ralink/clk-mtmips.c
--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]
Powered by blists - more mailing lists