lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 28 Jun 2023 14:54:06 +0200
From:   Stefan Moring <stefan.moring@...hnolution.nl>
To:     broonie@...nel.org, shawnguo@...nel.org, s.hauer@...gutronix.de,
        festevam@...il.com, linux-imx@....com, linux-spi@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc:     Stefan Moring <stefan.moring@...hnolution.nl>
Subject: [PATCH] spi: Increase imx51 ecspi burst length based on transfer length

IMX51 supports 4096 bit burst lengths. Using the spi transfer length
instead of bits_per_word increases performance significantly.

Signed-off-by: Stefan Moring <stefan.moring@...hnolution.nl>
---
 drivers/spi/spi-imx.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 34e5f81ec431..cbd306c25d28 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -644,9 +644,13 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	if (spi_imx->slave_mode && is_imx53_ecspi(spi_imx))
 		ctrl |= (spi_imx->slave_burst * 8 - 1)
 			<< MX51_ECSPI_CTRL_BL_OFFSET;
-	else
-		ctrl |= (spi_imx->bits_per_word - 1)
-			<< MX51_ECSPI_CTRL_BL_OFFSET;
+	else {
+		if (spi_imx->count >= 512)
+			ctrl |= 0xFFF << MX51_ECSPI_CTRL_BL_OFFSET;
+		else
+			ctrl |= (spi_imx->count*8 - 1)
+				<< MX51_ECSPI_CTRL_BL_OFFSET;
+	}
 
 	/* set clock speed */
 	ctrl &= ~(0xf << MX51_ECSPI_CTRL_POSTDIV_OFFSET |
@@ -1243,6 +1247,7 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 		spi_imx->spi_bus_clk = t->speed_hz;
 
 	spi_imx->bits_per_word = t->bits_per_word;
+	spi_imx->count = t->len;
 
 	/*
 	 * Initialize the functions for transfer. To transfer non byte-aligned
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ