[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <168796193528.368653.1076049997198394048.robh@kernel.org>
Date: Wed, 28 Jun 2023 08:18:57 -0600
From: Rob Herring <robh@...nel.org>
To: Konrad Dybcio <konrad.dybcio@...aro.org>
Cc: linux-kernel@...r.kernel.org, Conor Dooley <conor+dt@...nel.org>,
devicetree@...r.kernel.org, Robert Marko <robimarko@...il.com>,
Bjorn Andersson <andersson@...nel.org>,
Stephen Boyd <sboyd@...nel.org>,
Viresh Kumar <vireshk@...nel.org>,
linux-arm-msm@...r.kernel.org, Nishanth Menon <nm@...com>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Marijn Suijten <marijn.suijten@...ainline.org>,
linux-pm@...r.kernel.org, Niklas Cassel <nks@...wful.org>,
Andy Gross <agross@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Jeffrey Hugo <quic_jhugo@...cinc.com>
Subject: Re: [PATCH v12 03/10] dt-bindings: opp: v2-qcom-level: Document
CPR3 open/closed loop volt adjustment
On Wed, 28 Jun 2023 16:00:42 +0200, Konrad Dybcio wrote:
> CPR3 and newer can be fed per-OPP voltage adjustment values for both
> open- and closed-loop paths to make better decisions about settling
> on the final voltage offset target. Document these properties.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> ---
> .../devicetree/bindings/opp/opp-v2-qcom-level.yaml | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['ti,twl6035-pmic', 'ti,palmas-pmic']
Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['ti,twl6035-pmic', 'ti,palmas-pmic']
Documentation/devicetree/bindings/i2c/qcom,i2c-cci.example.dtb: /example-0/cci@...a000/i2c-bus@...amera@60: failed to match any schema with compatible: ['ovti,ov7251']
Documentation/devicetree/bindings/net/marvell,mvusb.example.dtb: /example-0/usb/mdio@...witch@0: failed to match any schema with compatible: ['marvell,mv88e6190']
Documentation/devicetree/bindings/net/qca,ar71xx.example.dtb: /example-0/ethernet@...00000/mdio/switch@10: failed to match any schema with compatible: ['qca,ar9331-switch']
Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.example.dtb: /example-0/memory-controller@...10000/ethernet@6: failed to match any schema with compatible: ['davicom,dm9000']
Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.example.dtb: /example-0/iomcu@...7e000: failed to match any schema with compatible: ['hisilicon,hi3660-iomcu', 'syscon']
Documentation/devicetree/bindings/leds/common.example.dtb: /example-2/i2c/led-controller@30: failed to match any schema with compatible: ['panasonic,an30259a']
Documentation/devicetree/bindings/dma/dma-router.example.dtb: /example-0/dma-router@...02b78: failed to match any schema with compatible: ['ti,dra7-dma-crossbar']
Documentation/devicetree/bindings/dma/dma-controller.example.dtb: /example-0/dma-controller@...00000: failed to match any schema with compatible: ['ti,omap-sdma']
Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: /example-0/parent/i2c/camera@36: failed to match any schema with compatible: ['ovti,ov5695']
Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.example.dtb: /example-1/syscon@...00000: failed to match any schema with compatible: ['sprd,sc9863a-glbregs', 'syscon', 'simple-mfd']
Documentation/devicetree/bindings/clock/milbeaut-clock.example.dtb: /example-2/serial@...00010: failed to match any schema with compatible: ['socionext,milbeaut-usio-uart']
Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.example.dtb: /example-0/cpuctrl@...000/clock@0: failed to match any schema with compatible: ['hisilicon,hix5hd2-clock']
Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.example.dtb: /example-0/peripheral-controller@...0000/phy@850: failed to match any schema with compatible: ['hisilicon,hi3798cv200-combphy']
Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.example.dtb: /example-0/system-controller@...000/clock@0: failed to match any schema with compatible: ['hisilicon,hi3620-clock']
Documentation/devicetree/bindings/sound/audio-graph-card2.example.dtb: /example-0/cpu: failed to match any schema with compatible: ['cpu-driver']
Documentation/devicetree/bindings/sound/audio-graph-card2.example.dtb: /example-0/codec: failed to match any schema with compatible: ['codec-driver']
Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.example.dtb: /example-0/pmic@0: failed to match any schema with compatible: ['sprd,sc2731']
Documentation/devicetree/bindings/input/mediatek,pmic-keys.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['mediatek,mt6397']
Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.example.dtb: /example-0/avs-monitor@...d2000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd']
Documentation/devicetree/bindings/thermal/imx-thermal.example.dtb: /example-0/anatop@...8000: failed to match any schema with compatible: ['fsl,imx6q-anatop', 'syscon', 'simple-mfd']
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230217-topic-cpr3h-v12-3-1a4d050e1e67@linaro.org
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Powered by blists - more mailing lists