| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZJzwcG2gIxXh8HbE@ovpn-8-18.pek2.redhat.com>
Date: Thu, 29 Jun 2023 10:46:08 +0800
From: Ming Lei <ming.lei@...hat.com>
To: Andreas Hindborg <nmi@...aspace.dk>
Cc: Hans Holmberg <Hans.Holmberg@....com>,
Aravind Ramesh <Aravind.Ramesh@....com>,
Jens Axboe <axboe@...nel.dk>,
"open list:BLOCK LAYER" <linux-block@...r.kernel.org>,
Christoph Hellwig <hch@...radead.org>,
Matias Bjorling <Matias.Bjorling@....com>,
Andreas Hindborg <a.hindborg@...sung.com>,
open list <linux-kernel@...r.kernel.org>,
Damien Le Moal <dlemoal@...nel.org>, gost.dev@...sung.com,
Minwoo Im <minwoo.im.dev@...il.com>, ming.lei@...hat.com
Subject: Re: [PATCH v4 4/4] ublk: add zone append
On Wed, Jun 28, 2023 at 09:06:49PM +0200, Andreas Hindborg wrote:
> From: Andreas Hindborg <a.hindborg@...sung.com>
>
> Add zone append feature to ublk. This feature uses the `addr` field of `struct
> ublksrv_io_cmd`. Therefore ublk must be used with the user copy
> feature (UBLK_F_USER_COPY) for zone append to be available. Without this
> feature, ublk will fail zone append requests.
Given zone append is a must, please fail to add device in case of zoned
and !user_copy, then we can make fast IO code path clean.
>
> Suggested-by: Ming Lei <ming.lei@...hat.com>
> Signed-off-by: Andreas Hindborg <a.hindborg@...sung.com>
> ---
> drivers/block/ublk_drv-zoned.c | 11 +++++++++
> drivers/block/ublk_drv.c | 43 ++++++++++++++++++++++++++++++----
> drivers/block/ublk_drv.h | 1 +
> include/uapi/linux/ublk_cmd.h | 3 ++-
> 4 files changed, 52 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/block/ublk_drv-zoned.c b/drivers/block/ublk_drv-zoned.c
> index ea86bf4b3681..007e8fc7ff25 100644
> --- a/drivers/block/ublk_drv-zoned.c
> +++ b/drivers/block/ublk_drv-zoned.c
> @@ -16,6 +16,16 @@ void ublk_set_nr_zones(struct ublk_device *ub)
> ub->ub_disk->nr_zones = p->dev_sectors / p->chunk_sectors;
> }
>
> +int ublk_dev_param_zoned_validate(const struct ublk_device *ub)
> +{
> + const struct ublk_param_zoned *p = &ub->params.zoned;
> +
> + if (! p->max_zone_append_sectors)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> void ublk_dev_param_zoned_apply(struct ublk_device *ub)
> {
> const struct ublk_param_zoned *p = &ub->params.zoned;
> @@ -23,6 +33,7 @@ void ublk_dev_param_zoned_apply(struct ublk_device *ub)
> if (ub->dev_info.flags & UBLK_F_ZONED) {
> disk_set_max_active_zones(ub->ub_disk, p->max_active_zones);
> disk_set_max_open_zones(ub->ub_disk, p->max_open_zones);
> + blk_queue_max_zone_append_sectors(ub->ub_disk->queue, p->max_zone_append_sectors);
> }
> }
>
> diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
> index 88fa39853c61..6a949669b47e 100644
> --- a/drivers/block/ublk_drv.c
> +++ b/drivers/block/ublk_drv.c
> @@ -107,6 +107,11 @@ struct ublk_uring_cmd_pdu {
> */
> #define UBLK_IO_FLAG_NEED_GET_DATA 0x08
>
> +/*
> + * Set when IO is Zone Append
> + */
> +#define UBLK_IO_FLAG_ZONE_APPEND 0x10
> +
> struct ublk_io {
> /* userspace buffer address from io cmd */
> __u64 addr;
> @@ -230,6 +235,8 @@ static void ublk_dev_param_discard_apply(struct ublk_device *ub)
>
> static int ublk_validate_params(const struct ublk_device *ub)
> {
> + int ret = 0;
> +
> /* basic param is the only one which must be set */
> if (ub->params.types & UBLK_PARAM_TYPE_BASIC) {
> const struct ublk_param_basic *p = &ub->params.basic;
> @@ -260,6 +267,13 @@ static int ublk_validate_params(const struct ublk_device *ub)
> if (ub->params.types & UBLK_PARAM_TYPE_DEVT)
> return -EINVAL;
>
> + if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
> + (ub->params.types & UBLK_PARAM_TYPE_ZONED)) {
> + ret = ublk_dev_param_zoned_validate(ub);
> + if (ret)
> + return ret;
> + }
> +
> return 0;
> }
>
> @@ -690,6 +704,11 @@ static blk_status_t ublk_setup_iod(struct ublk_queue *ubq, struct request *req)
> return BLK_STS_IOERR;
> }
> case REQ_OP_ZONE_APPEND:
> + if (!(ubq->dev->dev_info.flags & UBLK_F_USER_COPY))
> + return BLK_STS_IOERR;
> + ublk_op = UBLK_IO_OP_ZONE_APPEND;
> + io->flags |= UBLK_IO_FLAG_ZONE_APPEND;
> + break;
> case REQ_OP_ZONE_RESET_ALL:
> case REQ_OP_DRV_OUT:
> /* We do not support zone append or reset_all yet */
> @@ -1112,6 +1131,12 @@ static void ublk_commit_completion(struct ublk_device *ub,
> /* find the io request and complete */
> req = blk_mq_tag_to_rq(ub->tag_set.tags[qid], tag);
>
> + if (IS_ENABLED(CONFIG_BLK_DEV_ZONED)) {
> + if (io->flags & UBLK_IO_FLAG_ZONE_APPEND)
> + req->__sector = ub_cmd->addr;
> + io->flags &= ~UBLK_IO_FLAG_ZONE_APPEND;
> + }
> +
> if (req && likely(!blk_should_fake_timeout(req->q)))
> ublk_put_req_ref(ubq, req);
> }
> @@ -1411,7 +1436,8 @@ static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
> ^ (_IOC_NR(cmd_op) == UBLK_IO_NEED_GET_DATA))
> goto out;
>
> - if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
> + if (ublk_support_user_copy(ubq) &&
> + !(io->flags & UBLK_IO_FLAG_ZONE_APPEND) && ub_cmd->addr) {
> ret = -EINVAL;
> goto out;
> }
> @@ -1534,11 +1560,14 @@ static inline bool ublk_check_ubuf_dir(const struct request *req,
> int ubuf_dir)
> {
> /* copy ubuf to request pages */
> - if (req_op(req) == REQ_OP_READ && ubuf_dir == ITER_SOURCE)
> + if ((req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_DRV_IN) &&
> + ubuf_dir == ITER_SOURCE)
> return true;
>
> /* copy request pages to ubuf */
> - if (req_op(req) == REQ_OP_WRITE && ubuf_dir == ITER_DEST)
> + if ((req_op(req) == REQ_OP_WRITE ||
> + req_op(req) == REQ_OP_ZONE_APPEND) &&
> + ubuf_dir == ITER_DEST)
> return true;
>
> return false;
> @@ -1867,6 +1896,12 @@ static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
> ub->dev_info.ublksrv_pid = ublksrv_pid;
> ub->ub_disk = disk;
>
> + ub->dev_info.state = UBLK_S_DEV_LIVE;
I guess the above line change isn't necessary?
Thanks,
Ming
Powered by blists - more mailing lists