| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <87edluy5l3.fsf@metaspace.dk>
Date: Thu, 29 Jun 2023 11:17:07 +0200
From: "Andreas Hindborg (Samsung)" <nmi@...aspace.dk>
To: Ming Lei <ming.lei@...hat.com>
Cc: Hans Holmberg <Hans.Holmberg@....com>,
Aravind Ramesh <Aravind.Ramesh@....com>,
Jens Axboe <axboe@...nel.dk>,
"open list:BLOCK LAYER" <linux-block@...r.kernel.org>,
Christoph Hellwig <hch@...radead.org>,
Matias Bjorling <Matias.Bjorling@....com>,
open list <linux-kernel@...r.kernel.org>,
Damien Le Moal <dlemoal@...nel.org>, gost.dev@...sung.com,
Minwoo Im <minwoo.im.dev@...il.com>
Subject: Re: [PATCH v4 4/4] ublk: add zone append
Ming Lei <ming.lei@...hat.com> writes:
> On Wed, Jun 28, 2023 at 09:06:49PM +0200, Andreas Hindborg wrote:
>> From: Andreas Hindborg <a.hindborg@...sung.com>
>>
>> Add zone append feature to ublk. This feature uses the `addr` field of `struct
>> ublksrv_io_cmd`. Therefore ublk must be used with the user copy
>> feature (UBLK_F_USER_COPY) for zone append to be available. Without this
>> feature, ublk will fail zone append requests.
>
> Given zone append is a must, please fail to add device in case of zoned
> and !user_copy, then we can make fast IO code path clean.
I will squash the patches and reject zone support if not user copy is
enabled 👍
>
>>
>> Suggested-by: Ming Lei <ming.lei@...hat.com>
>> Signed-off-by: Andreas Hindborg <a.hindborg@...sung.com>
>> ---
>> drivers/block/ublk_drv-zoned.c | 11 +++++++++
>> drivers/block/ublk_drv.c | 43 ++++++++++++++++++++++++++++++----
>> drivers/block/ublk_drv.h | 1 +
>> include/uapi/linux/ublk_cmd.h | 3 ++-
>> 4 files changed, 52 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/block/ublk_drv-zoned.c b/drivers/block/ublk_drv-zoned.c
>> index ea86bf4b3681..007e8fc7ff25 100644
>> --- a/drivers/block/ublk_drv-zoned.c
>> +++ b/drivers/block/ublk_drv-zoned.c
>> @@ -16,6 +16,16 @@ void ublk_set_nr_zones(struct ublk_device *ub)
>> ub->ub_disk->nr_zones = p->dev_sectors / p->chunk_sectors;
>> }
>>
>> +int ublk_dev_param_zoned_validate(const struct ublk_device *ub)
>> +{
>> + const struct ublk_param_zoned *p = &ub->params.zoned;
>> +
>> + if (! p->max_zone_append_sectors)
>> + return -EINVAL;
>> +
>> + return 0;
>> +}
>> +
>> void ublk_dev_param_zoned_apply(struct ublk_device *ub)
>> {
>> const struct ublk_param_zoned *p = &ub->params.zoned;
>> @@ -23,6 +33,7 @@ void ublk_dev_param_zoned_apply(struct ublk_device *ub)
>> if (ub->dev_info.flags & UBLK_F_ZONED) {
>> disk_set_max_active_zones(ub->ub_disk, p->max_active_zones);
>> disk_set_max_open_zones(ub->ub_disk, p->max_open_zones);
>> + blk_queue_max_zone_append_sectors(ub->ub_disk->queue, p->max_zone_append_sectors);
>> }
>> }
>>
>> diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
>> index 88fa39853c61..6a949669b47e 100644
>> --- a/drivers/block/ublk_drv.c
>> +++ b/drivers/block/ublk_drv.c
>> @@ -107,6 +107,11 @@ struct ublk_uring_cmd_pdu {
>> */
>> #define UBLK_IO_FLAG_NEED_GET_DATA 0x08
>>
>> +/*
>> + * Set when IO is Zone Append
>> + */
>> +#define UBLK_IO_FLAG_ZONE_APPEND 0x10
>> +
>> struct ublk_io {
>> /* userspace buffer address from io cmd */
>> __u64 addr;
>> @@ -230,6 +235,8 @@ static void ublk_dev_param_discard_apply(struct ublk_device *ub)
>>
>> static int ublk_validate_params(const struct ublk_device *ub)
>> {
>> + int ret = 0;
>> +
>> /* basic param is the only one which must be set */
>> if (ub->params.types & UBLK_PARAM_TYPE_BASIC) {
>> const struct ublk_param_basic *p = &ub->params.basic;
>> @@ -260,6 +267,13 @@ static int ublk_validate_params(const struct ublk_device *ub)
>> if (ub->params.types & UBLK_PARAM_TYPE_DEVT)
>> return -EINVAL;
>>
>> + if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
>> + (ub->params.types & UBLK_PARAM_TYPE_ZONED)) {
>> + ret = ublk_dev_param_zoned_validate(ub);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> return 0;
>> }
>>
>> @@ -690,6 +704,11 @@ static blk_status_t ublk_setup_iod(struct ublk_queue *ubq, struct request *req)
>> return BLK_STS_IOERR;
>> }
>> case REQ_OP_ZONE_APPEND:
>> + if (!(ubq->dev->dev_info.flags & UBLK_F_USER_COPY))
>> + return BLK_STS_IOERR;
>> + ublk_op = UBLK_IO_OP_ZONE_APPEND;
>> + io->flags |= UBLK_IO_FLAG_ZONE_APPEND;
>> + break;
>> case REQ_OP_ZONE_RESET_ALL:
>> case REQ_OP_DRV_OUT:
>> /* We do not support zone append or reset_all yet */
>> @@ -1112,6 +1131,12 @@ static void ublk_commit_completion(struct ublk_device *ub,
>> /* find the io request and complete */
>> req = blk_mq_tag_to_rq(ub->tag_set.tags[qid], tag);
>>
>> + if (IS_ENABLED(CONFIG_BLK_DEV_ZONED)) {
>> + if (io->flags & UBLK_IO_FLAG_ZONE_APPEND)
>> + req->__sector = ub_cmd->addr;
>> + io->flags &= ~UBLK_IO_FLAG_ZONE_APPEND;
>> + }
>> +
>> if (req && likely(!blk_should_fake_timeout(req->q)))
>> ublk_put_req_ref(ubq, req);
>> }
>> @@ -1411,7 +1436,8 @@ static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
>> ^ (_IOC_NR(cmd_op) == UBLK_IO_NEED_GET_DATA))
>> goto out;
>>
>> - if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
>> + if (ublk_support_user_copy(ubq) &&
>> + !(io->flags & UBLK_IO_FLAG_ZONE_APPEND) && ub_cmd->addr) {
>> ret = -EINVAL;
>> goto out;
>> }
>> @@ -1534,11 +1560,14 @@ static inline bool ublk_check_ubuf_dir(const struct request *req,
>> int ubuf_dir)
>> {
>> /* copy ubuf to request pages */
>> - if (req_op(req) == REQ_OP_READ && ubuf_dir == ITER_SOURCE)
>> + if ((req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_DRV_IN) &&
>> + ubuf_dir == ITER_SOURCE)
>> return true;
>>
>> /* copy request pages to ubuf */
>> - if (req_op(req) == REQ_OP_WRITE && ubuf_dir == ITER_DEST)
>> + if ((req_op(req) == REQ_OP_WRITE ||
>> + req_op(req) == REQ_OP_ZONE_APPEND) &&
>> + ubuf_dir == ITER_DEST)
>> return true;
>>
>> return false;
>> @@ -1867,6 +1896,12 @@ static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
>> ub->dev_info.ublksrv_pid = ublksrv_pid;
>> ub->ub_disk = disk;
>>
>> + ub->dev_info.state = UBLK_S_DEV_LIVE;
>
> I guess the above line change isn't necessary?
It needs to go before the call to `ublk_revalidate_disk_zones()` because
that does IO to the disk in the form of a call to `report_zones()`. So I
can move it down a little bit.
Best regards,
Andreas
Powered by blists - more mailing lists