| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <168804118770.3585053.4473096672239924197@Monstersaurus>
Date: Thu, 29 Jun 2023 13:19:47 +0100
From: Kieran Bingham <kieran.bingham@...asonboard.com>
To: Umang Jain <umang.jain@...asonboard.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-media@...r.kernel.org, linux-rpi-kernel@...ts.infradead.org,
linux-staging@...ts.linux.dev
Cc: stefan.wahren@...e.com, gregkh@...uxfoundation.org,
f.fainelli@...il.com, athierry@...hat.com, error27@...il.com,
dave.stevenson@...pberrypi.com, laurent.pinchart@...asonboard.com
Subject: Re: [PATCH v8 3/5] staging: bcm2835-camera: Register bcm2835-camera with vchiq_bus_type
Quoting Umang Jain (2023-06-29 12:49:17)
> Hi Kieran,
>
> On 6/29/23 12:44 AM, Kieran Bingham wrote:
> > Quoting Umang Jain (2023-06-27 21:16:26)
> >> Register the bcm2835-camera with the vchiq_bus_type instead of using
> >> platform driver/device.
> >>
> >> Also the VCHIQ firmware doesn't support device enumeration, hence
> >> one has to maintain a list of devices to be registered in the interface.
> >>
> >> Signed-off-by: Umang Jain <umang.jain@...asonboard.com>
> >> ---
> >> .../bcm2835-camera/bcm2835-camera.c | 16 +++++++-------
> >> .../interface/vchiq_arm/vchiq_arm.c | 21 ++++++++++++++++---
> >> 2 files changed, 26 insertions(+), 11 deletions(-)
> >>
> >> diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
> >> index 346d00df815a..f37b2a881d92 100644
> >> --- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
> >> +++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
> >> @@ -24,8 +24,9 @@
> >> #include <media/v4l2-event.h>
> >> #include <media/v4l2-common.h>
> >> #include <linux/delay.h>
> >> -#include <linux/platform_device.h>
> >>
> >> +#include "../interface/vchiq_arm/vchiq_arm.h"
> >> +#include "../interface/vchiq_arm/vchiq_device.h"
> >> #include "../vchiq-mmal/mmal-common.h"
> >> #include "../vchiq-mmal/mmal-encodings.h"
> >> #include "../vchiq-mmal/mmal-vchiq.h"
> >> @@ -1841,7 +1842,7 @@ static struct v4l2_format default_v4l2_format = {
> >> .fmt.pix.sizeimage = 1024 * 768,
> >> };
> >>
> >> -static int bcm2835_mmal_probe(struct platform_device *pdev)
> >> +static int bcm2835_mmal_probe(struct vchiq_device *device)
> >> {
> >> int ret;
> >> struct bcm2835_mmal_dev *dev;
> >> @@ -1896,7 +1897,7 @@ static int bcm2835_mmal_probe(struct platform_device *pdev)
> >> &camera_instance);
> >> ret = v4l2_device_register(NULL, &dev->v4l2_dev);
> >> if (ret) {
> >> - dev_err(&pdev->dev, "%s: could not register V4L2 device: %d\n",
> >> + dev_err(&device->dev, "%s: could not register V4L2 device: %d\n",
> >> __func__, ret);
> >> goto free_dev;
> >> }
> >> @@ -1976,7 +1977,7 @@ static int bcm2835_mmal_probe(struct platform_device *pdev)
> >> return ret;
> >> }
> >>
> >> -static void bcm2835_mmal_remove(struct platform_device *pdev)
> >> +static void bcm2835_mmal_remove(struct vchiq_device *device)
> >> {
> >> int camera;
> >> struct vchiq_mmal_instance *instance = gdev[0]->instance;
> >> @@ -1988,17 +1989,16 @@ static void bcm2835_mmal_remove(struct platform_device *pdev)
> >> vchiq_mmal_finalise(instance);
> >> }
> >>
> >> -static struct platform_driver bcm2835_camera_driver = {
> >> +static struct vchiq_driver bcm2835_camera_driver = {
> >> .probe = bcm2835_mmal_probe,
> >> - .remove_new = bcm2835_mmal_remove,
> >> + .remove = bcm2835_mmal_remove,
> >> .driver = {
> >> .name = "bcm2835-camera",
> >> },
> >> };
> >>
> >> -module_platform_driver(bcm2835_camera_driver)
> >> +module_vchiq_driver(bcm2835_camera_driver)
> >>
> >> MODULE_DESCRIPTION("Broadcom 2835 MMAL video capture");
> >> MODULE_AUTHOR("Vincent Sanders");
> >> MODULE_LICENSE("GPL");
> >> -MODULE_ALIAS("platform:bcm2835-camera");
> > This bit worries me. I think that's how module autoloading is handled.
> >
> > Can you check into the details of MODULE_ALIAS and follow the rabbit
> > hole for a bit? It's a few years since I last went down there so I can't
> > remember the specifics right now.
>
> vchiq_probe() will register both the bcm2385_audio and bcm2835-camera
> hence, we don't need MODULE_ALIAS for those two.
It registers the devices, but I thought MODULE_ALIAS was how that gets
tied to which module to load (when drivers are built as modules).
> So what I also tested is that, when bcm2835_vchiq loads, it will
> auto-load both audio and camera with it (since these are child devices
> of vchiq). I think that's the correct way.
Could you test a build with the following (two) configurations please?
1)
CONFIG_BCM2835_VCHIQ=y
CONFIG_VIDEO_BCM2835=m
CONFIG_SND_BCM2835=m
2)
CONFIG_BCM2835_VCHIQ=m
CONFIG_VIDEO_BCM2835=m
CONFIG_SND_BCM2835=m
> >
> > Except for that, I think this looks good.
> >
> >
> >> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> >> index e8d40f891449..79d4d0eeb5fb 100644
> >> --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> >> +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> >> @@ -67,7 +67,6 @@ int vchiq_susp_log_level = VCHIQ_LOG_ERROR;
> >> DEFINE_SPINLOCK(msg_queue_spinlock);
> >> struct vchiq_state g_state;
> >>
> >> -static struct platform_device *bcm2835_camera;
> >> static struct platform_device *bcm2835_audio;
> >>
> >> struct vchiq_drvdata {
> >> @@ -134,6 +133,15 @@ struct vchiq_pagelist_info {
> >> unsigned int scatterlist_mapped;
> >> };
> >>
> >> +/*
> >> + * The devices implemented in the VCHIQ firmware are not discoverable,
> >> + * so we need to maintain a list of them in order to register them with
> >> + * the interface.
> >> + */
> >> +static const char *const vchiq_devices[] = {
> >> + "bcm2835-camera",
> >> +};
> >> +
> >> static void __iomem *g_regs;
> >> /* This value is the size of the L2 cache lines as understood by the
> >> * VPU firmware, which determines the required alignment of the
> >> @@ -1798,6 +1806,7 @@ static int vchiq_probe(struct platform_device *pdev)
> >> struct device_node *fw_node;
> >> const struct of_device_id *of_id;
> >> struct vchiq_drvdata *drvdata;
> >> + unsigned int i;
> >> int err;
> >>
> >> of_id = of_match_node(vchiq_of_match, pdev->dev.of_node);
> >> @@ -1840,9 +1849,15 @@ static int vchiq_probe(struct platform_device *pdev)
> >> goto error_exit;
> >> }
> >>
> >> - bcm2835_camera = vchiq_register_child(pdev, "bcm2835-camera");
> >> bcm2835_audio = vchiq_register_child(pdev, "bcm2835_audio");
> >>
> >> + for (i = 0; i < ARRAY_SIZE(vchiq_devices); i++) {
> >> + err = vchiq_device_register(&pdev->dev, vchiq_devices[i]);
> >> + if (err)
> >> + dev_err(&pdev->dev, "Failed to register %s vchiq device\n",
> >> + vchiq_devices[i]);
> >> + }
> >> +
> >> return 0;
> >>
> >> failed_platform_init:
> >> @@ -1854,7 +1869,7 @@ static int vchiq_probe(struct platform_device *pdev)
> >> static void vchiq_remove(struct platform_device *pdev)
> >> {
> >> platform_device_unregister(bcm2835_audio);
> >> - platform_device_unregister(bcm2835_camera);
> >> + bus_for_each_dev(&vchiq_bus_type, NULL, NULL, vchiq_device_unregister);
> >> vchiq_debugfs_deinit();
> >> vchiq_deregister_chrdev();
> >> }
> >> --
> >> 2.39.1
> >>
>
Powered by blists - more mailing lists