linux-kernel - Re: [PATCH v4 20/21] firmware: qcom_scm: Refactor code to support multiple download mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0ac3e4cd-485e-43a4-ae76-4c462a8145ed@quicinc.com>
Date:   Fri, 30 Jun 2023 10:55:39 +0530
From:   Pavan Kondeti <quic_pkondeti@...cinc.com>
To:     Mukesh Ojha <quic_mojha@...cinc.com>
CC:     <corbet@....net>, <agross@...nel.org>, <andersson@...nel.org>,
        <konrad.dybcio@...aro.org>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
        <keescook@...omium.org>, <tony.luck@...el.com>,
        <gpiccoli@...lia.com>, <mathieu.poirier@...aro.org>,
        <catalin.marinas@....com>, <will@...nel.org>,
        <linus.walleij@...aro.org>, <andy.shevchenko@...il.com>,
        <linux-doc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-hardening@...r.kernel.org>,
        <linux-remoteproc@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-gpio@...r.kernel.org>
Subject: Re: [PATCH v4 20/21] firmware: qcom_scm: Refactor code to support
 multiple download mode

On Wed, Jun 28, 2023 at 06:04:47PM +0530, Mukesh Ojha wrote:
> Currently on Qualcomm SoC, download_mode is enabled if
> CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is selected.
> 
> Refactor the code such that it supports multiple download
> modes and drop CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT config
> instead, give interface to set the download mode from
> module parameter.
> 
> Signed-off-by: Mukesh Ojha <quic_mojha@...cinc.com>
> ---
>  drivers/firmware/Kconfig    | 11 ---------
>  drivers/firmware/qcom_scm.c | 56 +++++++++++++++++++++++++++++++++++++++------
>  2 files changed, 49 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
> index b59e3041fd62..ff7e9f330559 100644
> --- a/drivers/firmware/Kconfig
> +++ b/drivers/firmware/Kconfig
> @@ -215,17 +215,6 @@ config MTK_ADSP_IPC
>  config QCOM_SCM
>  	tristate
>  
> -config QCOM_SCM_DOWNLOAD_MODE_DEFAULT
> -	bool "Qualcomm download mode enabled by default"
> -	depends on QCOM_SCM
> -	help
> -	  A device with "download mode" enabled will upon an unexpected
> -	  warm-restart enter a special debug mode that allows the user to
> -	  "download" memory content over USB for offline postmortem analysis.
> -	  The feature can be enabled/disabled on the kernel command line.
> -
> -	  Say Y here to enable "download mode" by default.
> -
>  config SYSFB
>  	bool
>  	select BOOT_VESA_SUPPORT
> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> index a9ff77d16c42..946cb0f76a17 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -18,13 +18,13 @@
>  #include <linux/of_irq.h>
>  #include <linux/of_platform.h>
>  #include <linux/clk.h>
> +#include <linux/kstrtox.h>
>  #include <linux/reset-controller.h>
>  #include <linux/arm-smccc.h>
>  
>  #include "qcom_scm.h"
>  
> -static bool download_mode = IS_ENABLED(CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT);
> -module_param(download_mode, bool, 0);
> +static u32 download_mode;
>  
>  #define SCM_HAS_CORE_CLK	BIT(0)
>  #define SCM_HAS_IFACE_CLK	BIT(1)
> @@ -82,6 +82,11 @@ static const char * const qcom_scm_convention_names[] = {
>  	[SMC_CONVENTION_LEGACY] = "smc legacy",
>  };
>  
> +static const char * const download_mode_name[] = {
> +	[QCOM_DOWNLOAD_NODUMP]	 = "off",
> +	[QCOM_DOWNLOAD_FULLDUMP] = "full",
> +};
> +
>  static struct qcom_scm *__scm;
>  
>  static int qcom_scm_clk_enable(void)
> @@ -442,8 +447,9 @@ static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
>  	return qcom_scm_call_atomic(__scm->dev, &desc, NULL);
>  }
>  
> -static void qcom_scm_set_download_mode(bool enable)
> +static void qcom_scm_set_download_mode(u32 download_mode)
>  {
> +	bool enable = !!download_mode;
>  	bool avail;
>  	int val;
>  	int ret = 0;
> @@ -454,7 +460,7 @@ static void qcom_scm_set_download_mode(bool enable)
>  	if (avail) {
>  		ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
>  	} else if (__scm->dload_mode_addr) {
> -		val = (enable ? QCOM_DOWNLOAD_FULLDUMP : QCOM_DOWNLOAD_NODUMP);
> +		val = download_mode;
>  		val <<= QCOM_DOWNLOAD_MODE_SHIFT;
>  		ret = qcom_scm_io_update_field(__scm->dload_mode_addr,
>  				QCOM_DOWNLOAD_MODE_MASK, val);
> @@ -1425,6 +1431,42 @@ static irqreturn_t qcom_scm_irq_handler(int irq, void *data)
>  	return IRQ_HANDLED;
>  }
>  
> +static int get_download_mode(char *buffer, const struct kernel_param *kp)
> +{
> +	if (download_mode >= ARRAY_SIZE(download_mode_name))
> +		return sysfs_emit(buffer, "unknown mode\n");
> +
> +	return sysfs_emit(buffer, "%s\n", download_mode_name[download_mode]);
> +}
> +
> +static int set_download_mode(const char *val, const struct kernel_param *kp)
> +{
> +	u32 old = download_mode;
> +	int ret;
> +
> +	ret = sysfs_match_string(download_mode_name, val);
> +	if (ret < 0) {
> +		download_mode = old;
> +		pr_err("qcom_scm: unknown download mode: %s\n", val);
> +		return -EINVAL;
> +	}

minor nit: %s/-EINVAL/ret 

> +
> +	download_mode = ret;
> +	if (__scm)
> +		qcom_scm_set_download_mode(download_mode);
> +
> +	return 0;
> +}
> +
> +static const struct kernel_param_ops download_mode_param_ops = {
> +	.get = get_download_mode,
> +	.set = set_download_mode,
> +};
> +
> +module_param_cb(download_mode, &download_mode_param_ops, NULL, 0644);
> +MODULE_PARM_DESC(download_mode,
> +		"download mode: off/full are acceptable values");
> +

Since we are adding a sysfs file under /sys/module/qcom_scm/ , does it
need to be documented under ABI?

Thanks,
Pavan