linux-kernel - [PATCH v3] serial: 8250_dw: Preserve original value of DLF register

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230630003806.66112-1-colorsu1922@gmail.com>
Date:   Fri, 30 Jun 2023 08:38:08 +0800
From:   Ruihong Luo <colorsu1922@...il.com>
To:     andriy.shevchenko@...ux.intel.com
Cc:     gregkh@...uxfoundation.org, ilpo.jarvinen@...ux.intel.com,
        jirislaby@...nel.org, linux-kernel@...r.kernel.org,
        linux-serial@...r.kernel.org, luoruihong@...omi.com,
        weipengliang@...omi.com, wengjinfei@...omi.com,
        Ruihong Luo <colorsu1922@...il.com>
Subject: [PATCH v3] serial: 8250_dw: Preserve original value of DLF register

Preserve the original value of the Divisor Latch Fraction (DLF) register.
When the DLF register is modified without preservation, it can disrupt
the baudrate settings established by firmware or bootloader, leading to
data corruption and the generation of unreadable or distorted characters.

Fixes: 701c5e73b296 ("serial: 8250_dw: add fractional divisor support")
Signed-off-by: Ruihong Luo <colorsu1922@...il.com>
---
v3:
- modify the commit message
- use personal email to sign
 drivers/tty/serial/8250/8250_dwlib.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
index 75f32f054ebb..d30957722da8 100644
--- a/drivers/tty/serial/8250/8250_dwlib.c
+++ b/drivers/tty/serial/8250/8250_dwlib.c
@@ -244,7 +244,7 @@ void dw8250_setup_port(struct uart_port *p)
 	struct dw8250_port_data *pd = p->private_data;
 	struct dw8250_data *data = to_dw8250_data(pd);
 	struct uart_8250_port *up = up_to_u8250p(p);
-	u32 reg;
+	u32 reg, orig;
 
 	pd->hw_rs485_support = dw8250_detect_rs485_hw(p);
 	if (pd->hw_rs485_support) {
@@ -270,9 +270,11 @@ void dw8250_setup_port(struct uart_port *p)
 	dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
 		(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
 
+	/* Preserve value written by firmware or bootloader  */
+	orig = dw8250_readl_ext(p, DW_UART_DLF);
 	dw8250_writel_ext(p, DW_UART_DLF, ~0U);
 	reg = dw8250_readl_ext(p, DW_UART_DLF);
-	dw8250_writel_ext(p, DW_UART_DLF, 0);
+	dw8250_writel_ext(p, DW_UART_DLF, orig);
 
 	if (reg) {
 		pd->dlf_size = fls(reg);
-- 
2.39.2