[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZJ8YGFxQCHKCCAqw@smile.fi.intel.com>
Date: Fri, 30 Jun 2023 20:59:52 +0300
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Astrid Rost <astrid.rost@...s.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh@...nel.org>,
Jacek Anaszewski <jacek.anaszewski@...il.com>,
Pavel Machek <pavel@....cz>, Lee Jones <lee@...nel.org>,
kernel@...s.com, linux-leds@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/2] led: led-class: Read max-brightness from
devicetree
On Fri, Jun 30, 2023 at 11:22:46AM +0200, Astrid Rost wrote:
> Add max-brightness in order to reduce the current on the connected LEDs.
> Normally, the maximum brightness is determined by the hardware, and this
> property is not required. This property is used to set a software limit.
> It could happen that an LED is made so bright that it gets damaged or
> causes damage due to restrictions in a specific system, such as mounting
> conditions. Note that led-max-microamp should be preferably used, if it
> is supported by the controller.
LGTM,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Maybe you can also add to the cover letter that there are already users in
the kernel that may be simplified after this change lands the upstream.
> Signed-off-by: Astrid Rost <astrid.rost@...s.com>
> ---
> drivers/leds/led-class.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
> index 9255bc11f99d..ce652abf9336 100644
> --- a/drivers/leds/led-class.c
> +++ b/drivers/leds/led-class.c
> @@ -457,6 +457,10 @@ int led_classdev_register_ext(struct device *parent,
> if (fwnode_property_present(init_data->fwnode,
> "retain-state-shutdown"))
> led_cdev->flags |= LED_RETAIN_AT_SHUTDOWN;
> +
> + fwnode_property_read_u32(init_data->fwnode,
> + "max-brightness",
> + &led_cdev->max_brightness);
> }
> } else {
> proposed_name = led_cdev->name;
> --
> 2.30.2
>
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists