linux-kernel - Re: [PATCH v6 0/2] usb: serial: add support for CH348

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sat, 1 Jul 2023 21:16:09 +0200
From:   David Heidelberg <david@...t.cz>
To:     Corentin Labbe <clabbe@...libre.com>
Cc:     linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
        gregkh@...uxfoundation.org, johan@...nel.org
Subject: Re: [PATCH v6 0/2] usb: serial: add support for CH348

Tested-by: David Heidelberg <david@...t.cz>
Reviewed-by: David Heidelberg <david@...t.cz>

Thank you

On 28/06/2023 15:38, Corentin Labbe wrote:
> Hello
>
> The CH348 is an octo serial to USB adapter.
> The following patch adds a driver for supporting it.
> Since there is no public datasheet, unfortunatly it remains some magic values.
>
> It was tested with a large range of baud from 1200 to 1500000 and used with
> success in one of our kernel CI testlab.
>
> Regards
>
> Changes since v1:
> - use a data structure for encoding/decoding messages.
> - check if needed endpoints exists
> - fix URB leak in ch348_allocate_status_read error case
> - test for maximum baud rate as stated by datasheet
>
> Changes since v2:
> - specify ch348_rxbuf data length
> - Use correct speed_t dwDTERate instead of __le32
> - test for maximum baud rate supported according to datasheet
> - Use a define for CH348_TX_HDRSIZE
>
> Changes since v3
> - Fixed all reported problem from https://lore.kernel.org/lkml/Y5NDwEakGJbmB6+b@Red/T/#mb6234d0427cfdabf412190565e215995a41482dd
>    Mostly reworked the endpoint mux to be the same than mx_uport
>
> Changes since v4:
> - The V4 was sent against stable and next have ch348_set_termios ktermios
>    parameter const that I forgot to change
>
> Changes since v5:
> - Fixed all reported problem from https://lore.kernel.org/lkml/20230106135338.643951-1-clabbe@baylibre.com/T/#m044aab24dfb652ea34aa06f8ef704da9d6a2e036
> - Major change is dropping of all status handling which was unused.
>    It will be probably necessary to bring it back when using GPIO.
>    This will be done when I will finish my next devboard.
>
> Corentin Labbe (2):
>    usb: serial: add support for CH348
>    usb: serial: add myself as maintainer of CH348
>
>   MAINTAINERS                 |   5 +
>   drivers/usb/serial/Kconfig  |   9 +
>   drivers/usb/serial/Makefile |   1 +
>   drivers/usb/serial/ch348.c  | 491 ++++++++++++++++++++++++++++++++++++
>   4 files changed, 506 insertions(+)
>   create mode 100644 drivers/usb/serial/ch348.c
>
-- 
David Heidelberg
Consultant Software Engineer