[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZKM_Ltif-L59Jo34@surfacebook>
Date: Tue, 4 Jul 2023 00:35:42 +0300
From: andy.shevchenko@...il.com
To: Mario Limonciello <mario.limonciello@....com>
Cc: Basavaraj.Natikar@....com, Shyam-sundar.S-k@....com,
linus.walleij@...aro.org, npliashechnikov@...il.com,
nmschulte@...il.com, friedrich.vock@....de, dridri85@...il.com,
linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 4/4] pinctrl: amd: Use amd_pinconf_set() for all config
options
Fri, Jun 30, 2023 at 02:47:16PM -0500, Mario Limonciello kirjoitti:
> On ASUS TUF A16 it is reported that the ITE5570 ACPI device connected to
> GPIO 7 is causing an interrupt storm. This issue doesn't happen on
> Windows.
>
> Comparing the GPIO register configuration between Windows and Linux
> bit 20 has been configured as a pull up on Windows, but not on Linux.
> Checking GPIO declaration from the firmware it is clear it *should* have
> been a pull up on Linux as well.
>
> ```
> GpioInt (Level, ActiveLow, Exclusive, PullUp, 0x0000,
> "\\_SB.GPIO", 0x00, ResourceConsumer, ,
> )
> { // Pin list
> 0x0007
> }
I beleive we do not need so many heading spaces in the above
> ```
>
> On Linux amd_gpio_set_config() is currently only used for programming
> the debounce. Actually the GPIO core calls it with all the arguments
> that are supported by a GPIO, pinctrl-amd just responds `-ENOTSUPP`.
>
> To solve this issue expand amd_gpio_set_config() to support the other
> arguments amd_pinconf_set() supports, namely `PIN_CONFIG_BIAS_PULL_DOWN`,
> `PIN_CONFIG_BIAS_PULL_UP`, and `PIN_CONFIG_DRIVE_STRENGTH`.
...
> Fixes: 2956b5d94a76b ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Can you group fixes at the beginning of the series?
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists