| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <168839584680.3733361.16157756581298354084.robh@kernel.org>
Date: Mon, 03 Jul 2023 08:50:47 -0600
From: Rob Herring <robh@...nel.org>
To: Konrad Dybcio <konrad.dybcio@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, Mark Brown <broonie@...nel.org>,
devicetree@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
linux-i2c@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Andi Shyti <andi.shyti@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, linux-spi@...r.kernel.org,
linux-serial@...r.kernel.org, Andy Gross <agross@...nel.org>,
linux-kernel@...r.kernel.org,
Marijn Suijten <marijn.suijten@...ainline.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Bjorn Andersson <andersson@...nel.org>
Subject: Re: [PATCH 2/5] dt-bindings: serial: geni-qcom: Allow no qup-core
icc path
On Mon, 03 Jul 2023 15:31:11 +0200, Konrad Dybcio wrote:
> Some SoCs (like SM8150 and SM8250) don't seem to provide a qup-core path.
> Allow such case.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> ---
> .../bindings/serial/qcom,serial-geni-qcom.yaml | 26 +++++++++++++++-------
> 1 file changed, 18 insertions(+), 8 deletions(-)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.example.dtb: geniqup@...000: serial@...000: More than one condition true in oneOf schema:
{'$filename': '/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml',
'$id': 'http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#',
'$schema': 'http://devicetree.org/meta-schemas/core.yaml#',
'allOf': [{'$ref': '/schemas/serial/serial.yaml#'},
{'oneOf': [{'required': ['interrupts']},
{'required': ['interrupts-extended']}]}],
'oneOf': [{'patternProperties': {'pinctrl-[0-9]+': True},
'properties': {'$nodename': True,
'bootph-all': True,
'bootph-pre-ram': True,
'bootph-pre-sram': True,
'bootph-some-ram': True,
'bootph-verify': True,
'interconnect-names': {'items': [{'const': 'qup-config'}],
'maxItems': 1,
'minItems': 1,
'type': 'array'},
'interconnects': {'maxItems': 1,
'minItems': 1},
'phandle': True,
'pinctrl-names': True,
'secure-status': True,
'status': True}},
{'patternProperties': {'pinctrl-[0-9]+': True},
'properties': {'$nodename': True,
'bootph-all': True,
'bootph-pre-ram': True,
'bootph-pre-sram': True,
'bootph-some-ram': True,
'bootph-verify': True,
'interconnect-names': {'items': [{'const': 'qup-core'},
{'const': 'qup-config'}],
'maxItems': 2,
'minItems': 2,
'type': 'array'},
'interconnects': {'maxItems': 2,
'minItems': 2},
'phandle': True,
'pinctrl-names': True,
'secure-status': True,
'status': True}}],
'properties': {'$nodename': True,
'assigned-clock-parents': True,
'assigned-clock-rates': True,
'assigned-clocks': True,
'bootph-all': True,
'bootph-pre-ram': True,
'bootph-pre-sram': True,
'bootph-some-ram': True,
'bootph-verify': True,
'clock-names': {'items': [{'const': 'se'}],
'maxItems': 1,
'minItems': 1,
'type': 'array'},
'clocks': {'maxItems': 1, 'minItems': 1},
'compatible': {'items': [{'enum': ['qcom,geni-uart',
'qcom,geni-debug-uart']}],
'maxItems': 1,
'minItems': 1,
'type': 'array'},
'interrupt-parent': True,
'interrupts': {'maxItems': 2,
'minItems': 1,
'type': 'array'},
'interrupts-extended': {'maxItems': 2,
'minItems': 1,
'type': 'array'},
'operating-points-v2': True,
'phandle': True,
'pinctrl-0': True,
'pinctrl-1': True,
'pinctrl-names': {'items': [{'const': 'default'},
{'const': 'sleep'}],
'maxItems': 2,
'minItems': 1,
'type': 'array'},
'power-domains': {'maxItems': 1, 'minItems': 1},
'reg': {'maxItems': 1, 'minItems': 1},
'secure-status': True,
'status': True},
'required': ['compatible', 'clocks', 'clock-names', 'reg'],
'select': {'properties': {'compatible': {'contains': {'enum': ['qcom,geni-debug-uart',
'qcom,geni-uart']}}},
'required': ['compatible']},
'title': 'Qualcomm Geni based QUP UART interface',
'type': 'object',
'unevaluatedProperties': False}
from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.example.dtb: serial@...000: More than one condition true in oneOf schema:
{'$filename': '/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml',
'$id': 'http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#',
'$schema': 'http://devicetree.org/meta-schemas/core.yaml#',
'allOf': [{'$ref': '/schemas/serial/serial.yaml#'},
{'oneOf': [{'required': ['interrupts']},
{'required': ['interrupts-extended']}]}],
'oneOf': [{'patternProperties': {'pinctrl-[0-9]+': True},
'properties': {'$nodename': True,
'bootph-all': True,
'bootph-pre-ram': True,
'bootph-pre-sram': True,
'bootph-some-ram': True,
'bootph-verify': True,
'interconnect-names': {'items': [{'const': 'qup-config'}],
'maxItems': 1,
'minItems': 1,
'type': 'array'},
'interconnects': {'maxItems': 1,
'minItems': 1},
'phandle': True,
'pinctrl-names': True,
'secure-status': True,
'status': True}},
{'patternProperties': {'pinctrl-[0-9]+': True},
'properties': {'$nodename': True,
'bootph-all': True,
'bootph-pre-ram': True,
'bootph-pre-sram': True,
'bootph-some-ram': True,
'bootph-verify': True,
'interconnect-names': {'items': [{'const': 'qup-core'},
{'const': 'qup-config'}],
'maxItems': 2,
'minItems': 2,
'type': 'array'},
'interconnects': {'maxItems': 2,
'minItems': 2},
'phandle': True,
'pinctrl-names': True,
'secure-status': True,
'status': True}}],
'properties': {'$nodename': True,
'assigned-clock-parents': True,
'assigned-clock-rates': True,
'assigned-clocks': True,
'bootph-all': True,
'bootph-pre-ram': True,
'bootph-pre-sram': True,
'bootph-some-ram': True,
'bootph-verify': True,
'clock-names': {'items': [{'const': 'se'}],
'maxItems': 1,
'minItems': 1,
'type': 'array'},
'clocks': {'maxItems': 1, 'minItems': 1},
'compatible': {'items': [{'enum': ['qcom,geni-uart',
'qcom,geni-debug-uart']}],
'maxItems': 1,
'minItems': 1,
'type': 'array'},
'interrupt-parent': True,
'interrupts': {'maxItems': 2,
'minItems': 1,
'type': 'array'},
'interrupts-extended': {'maxItems': 2,
'minItems': 1,
'type': 'array'},
'operating-points-v2': True,
'phandle': True,
'pinctrl-0': True,
'pinctrl-1': True,
'pinctrl-names': {'items': [{'const': 'default'},
{'const': 'sleep'}],
'maxItems': 2,
'minItems': 1,
'type': 'array'},
'power-domains': {'maxItems': 1, 'minItems': 1},
'reg': {'maxItems': 1, 'minItems': 1},
'secure-status': True,
'status': True},
'required': ['compatible', 'clocks', 'clock-names', 'reg'],
'select': {'properties': {'compatible': {'contains': {'enum': ['qcom,geni-debug-uart',
'qcom,geni-uart']}}},
'required': ['compatible']},
'title': 'Qualcomm Geni based QUP UART interface',
'type': 'object',
'unevaluatedProperties': False}
from schema $id: http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230703-topic-8250_qup_icc-v1-2-fea39aa07525@linaro.org
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Powered by blists - more mailing lists