[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230704164140.824f6890dae5c87fc92531b4@hugovil.com>
Date: Tue, 4 Jul 2023 16:41:40 -0400
From: Hugo Villeneuve <hugo@...ovil.com>
To: Fabio Estevam <festevam@...il.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Pierluigi Passaro <pierluigi.p@...iscite.com>,
Nate Drude <nate.d@...iscite.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
NXP Linux Team <linux-imx@....com>,
Hugo Villeneuve <hvilleneuve@...onoff.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: imx8mn-var-som-symphony: fix USB OTG
On Tue, 4 Jul 2023 15:04:37 -0300
Fabio Estevam <festevam@...il.com> wrote:
> Hi Hugo,
>
> On Tue, Jul 4, 2023 at 2:02 PM Hugo Villeneuve <hugo@...ovil.com> wrote:
>
> > Ok, I tought pin 9 (ID) was an input, but it is in fact an output
> > driven by the PTN5150 so the last sentence is incorrect.
>
> Does USB OTG work if you keep interrupts = <11 IRQ_TYPE_LEVEL_LOW> ?
Hi Fabio,
with interrupts = <11 IRQ_TYPE_LEVEL_LOW>, USB OTG doesn't work.
I have added additional debug messages to help diagnose
(prefixed by DEBUG_IRQ), and here is what I have:
With IRQ_TYPE_LEVEL_LOW:
$ dmesg | grep 5150
[ 4.729134] ptn5150 1-003d: No VBUS GPIO, ignoring VBUS control
[ 4.735257] ptn5150 1-003d: DEBUG_IRQ: i2c->irq: 42
[ 4.749563] ptn5150 1-003d: DEBUG_IRQ: error in usb_role_switch_get()
[ 4.792956] ptn5150 1-003d: No VBUS GPIO, ignoring VBUS control
[ 4.799022] ptn5150 1-003d: DEBUG_IRQ: i2c->irq: 0
[ 4.803889] ptn5150 1-003d: error -ENOENT: failed to get INT GPIO
[ 4.810085] ptn5150: probe of 1-003d failed with error -2
With IRQ_TYPE_NONE:
$ dmesg | grep 5150
[ 4.726860] ptn5150 1-003d: No VBUS GPIO, ignoring VBUS control
[ 4.736050] ptn5150 1-003d: DEBUG_IRQ: i2c->irq: 42
[ 4.768351] ptn5150 1-003d: DEBUG_IRQ: error in usb_role_switch_get()
[ 4.803091] ptn5150 1-003d: No VBUS GPIO, ignoring VBUS control
[ 4.809172] ptn5150 1-003d: DEBUG_IRQ: i2c->irq: 42
[ 4.816030] ptn5150 1-003d: DEBUG_IRQ: error in usb_role_switch_get()
[ 4.825915] ptn5150 1-003d: No VBUS GPIO, ignoring VBUS control
[ 4.832057] ptn5150 1-003d: DEBUG_IRQ: i2c->irq: 42
[ 4.840722] ptn5150 1-003d: DEBUG_IRQ: error in usb_role_switch_get()
[ 4.889220] ptn5150 1-003d: No VBUS GPIO, ignoring VBUS control
[ 4.895271] ptn5150 1-003d: DEBUG_IRQ: i2c->irq: 42
[ 4.901636] ptn5150 1-003d: DEBUG_IRQ: error in usb_role_switch_get()
[ 4.934740] ptn5150 1-003d: No VBUS GPIO, ignoring VBUS control
[ 4.940840] ptn5150 1-003d: DEBUG_IRQ: i2c->irq: 42
[ 4.947223] ptn5150 1-003d: DEBUG_IRQ: error in usb_role_switch_get()
[ 4.993208] ptn5150 1-003d: No VBUS GPIO, ignoring VBUS control
[ 4.999347] ptn5150 1-003d: DEBUG_IRQ: i2c->irq: 42
[ 5.014494] ptn5150 1-003d: DEBUG_IRQ: error in usb_role_switch_get()
[ 5.071615] ptn5150 1-003d: No VBUS GPIO, ignoring VBUS control
[ 5.077771] ptn5150 1-003d: DEBUG_IRQ: i2c->irq: 42
[ 5.101222] ptn5150 1-003d: DEBUG_IRQ: probe done
Hugo.
Powered by blists - more mailing lists