| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230704090016.7757-2-quic_luoj@quicinc.com>
Date: Tue, 4 Jul 2023 17:00:15 +0800
From: Luo Jie <quic_luoj@...cinc.com>
To: <andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Luo Jie <quic_luoj@...cinc.com>
Subject: [PATCH v1 1/2] net: phy: at803x: support qca8081 1G chip type
The qca8081 1G chip version does not support 2.5 capability, which
is distinguished from qca8081 2.5G chip according to the bit0 of
register mmd7.0x901d.
The fast retrain and master slave seed configs are only needed when
the 2.5G capability is supported.
Switch to use genphy_c45_pma_read_abilities for .get_features API.
Signed-off-by: Luo Jie <quic_luoj@...cinc.com>
---
drivers/net/phy/at803x.c | 81 ++++++++++++++++++++++++++--------------
1 file changed, 54 insertions(+), 27 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index c1f307d90518..86cb030e5ebf 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -272,6 +272,10 @@
#define QCA808X_CDT_STATUS_STAT_OPEN 2
#define QCA808X_CDT_STATUS_STAT_SHORT 3
+/* QCA808X 1G chip type */
+#define QCA808X_PHY_MMD7_CHIP_TYPE 0x901d
+#define QCA808X_PHY_CHIP_TYPE_1G BIT(0)
+
MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
MODULE_AUTHOR("Matus Ujhelyi");
MODULE_LICENSE("GPL");
@@ -897,15 +901,6 @@ static int at803x_get_features(struct phy_device *phydev)
if (err)
return err;
- if (phydev->drv->phy_id == QCA8081_PHY_ID) {
- err = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_NG_EXTABLE);
- if (err < 0)
- return err;
-
- linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported,
- err & MDIO_PMA_NG_EXTABLE_2_5GBT);
- }
-
if (phydev->drv->phy_id != ATH8031_PHY_ID)
return 0;
@@ -1770,20 +1765,22 @@ static int qca808x_config_init(struct phy_device *phydev)
if (ret)
return ret;
- /* Config the fast retrain for the link 2500M */
- ret = qca808x_phy_fast_retrain_config(phydev);
- if (ret)
- return ret;
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported)) {
+ /* Config the fast retrain for the link 2500M */
+ ret = qca808x_phy_fast_retrain_config(phydev);
+ if (ret)
+ return ret;
- /* Configure lower ramdom seed to make phy linked as slave mode */
- ret = qca808x_phy_ms_random_seed_set(phydev);
- if (ret)
- return ret;
+ /* Configure lower ramdom seed to make phy linked as slave mode */
+ ret = qca808x_phy_ms_random_seed_set(phydev);
+ if (ret)
+ return ret;
- /* Enable seed */
- ret = qca808x_phy_ms_seed_enable(phydev, true);
- if (ret)
- return ret;
+ /* Enable seed */
+ ret = qca808x_phy_ms_seed_enable(phydev, true);
+ if (ret)
+ return ret;
+ }
/* Configure adc threshold as 100mv for the link 10M */
return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
@@ -1822,11 +1819,13 @@ static int qca808x_read_status(struct phy_device *phydev)
* value is configured as the same value, the link can't be up and no link change
* occurs.
*/
- if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR) {
- qca808x_phy_ms_seed_enable(phydev, false);
- } else {
- qca808x_phy_ms_random_seed_set(phydev);
- qca808x_phy_ms_seed_enable(phydev, true);
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported)) {
+ if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR) {
+ qca808x_phy_ms_seed_enable(phydev, false);
+ } else {
+ qca808x_phy_ms_random_seed_set(phydev);
+ qca808x_phy_ms_seed_enable(phydev, true);
+ }
}
}
@@ -1991,6 +1990,34 @@ static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finish
return 0;
}
+static int qca808x_get_features(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_c45_pma_read_abilities(phydev);
+ if (ret)
+ return ret;
+
+ /* The autoneg ability is not existed in bit3 of MMD7.1,
+ * but it is supported by qca808x PHY, so we add it here
+ * manually.
+ */
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
+
+ /* As for the qca8081 1G version chip, the 2500baseT ability is also
+ * existed in the bit0 of MMD1.21, we need to remove it manually if
+ * it is the qca8081 1G chip according to the bit0 of MMD7.0x901d.
+ */
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE);
+ if (ret < 0)
+ return ret;
+
+ if (QCA808X_PHY_CHIP_TYPE_1G & ret)
+ linkmode_clear_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
+
+ return 0;
+}
+
static struct phy_driver at803x_driver[] = {
{
/* Qualcomm Atheros AR8035 */
@@ -2160,7 +2187,7 @@ static struct phy_driver at803x_driver[] = {
.set_tunable = at803x_set_tunable,
.set_wol = at803x_set_wol,
.get_wol = at803x_get_wol,
- .get_features = at803x_get_features,
+ .get_features = qca808x_get_features,
.config_aneg = at803x_config_aneg,
.suspend = genphy_suspend,
.resume = genphy_resume,
--
2.17.1
Powered by blists - more mailing lists