linux-kernel - Re: [PATCH V2] PCI: qcom: Use PARF_SLV_ADDR_SPACE_SIZE for ops_2_3

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <05666bf0-07f8-1e3a-22bf-fc779e2b7367@linaro.org>
Date:   Tue, 4 Jul 2023 14:33:04 +0200
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Sricharan Ramabadhran <quic_srichara@...cinc.com>,
        agross@...nel.org, andersson@...nel.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
        sboyd@...nel.org, mturquette@...libre.com, mani@...nel.org,
        lpieralisi@...nel.org, bhelgaas@...gle.com,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
        linux-pci@...r.kernel.org
Cc:     stable@...r.kernel.org
Subject: Re: [PATCH V2] PCI: qcom: Use PARF_SLV_ADDR_SPACE_SIZE for ops_2_3_3

On 3.07.2023 19:57, Sricharan Ramabadhran wrote:
> PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro is used for IPQ8074
> 2_3_3 post_init ops. pcie slave addr size was initially set
> to 0x358, but was wrongly changed to 0x168 as a part of
> "PCI: qcom: Remove PCIE20_ prefix from register definitions"
> Fixing it, by using the right macro PARF_SLV_ADDR_SPACE_SIZE
> and removing the unused PARF_SLV_ADDR_SPACE_SIZE_2_3_3.
> 
> Without this pcie bring up on IPQ8074 is broken now.
> 
> Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@...cinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>

Konrad
>  [V2] Fixed the 'fixes tag' correctly, subject, right macro usage
> 
>  drivers/pci/controller/dwc/pcie-qcom.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 4ab30892f6ef..1689d072fe86 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -43,7 +43,6 @@
>  #define PARF_PHY_REFCLK				0x4c
>  #define PARF_CONFIG_BITS			0x50
>  #define PARF_DBI_BASE_ADDR			0x168
> -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x16c /* Register offset specific to IP ver 2.3.3 */
>  #define PARF_MHI_CLOCK_RESET_CTRL		0x174
>  #define PARF_AXI_MSTR_WR_ADDR_HALT		0x178
>  #define PARF_AXI_MSTR_WR_ADDR_HALT_V2		0x1a8
> @@ -811,7 +810,7 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
>  	u32 val;
>  
>  	writel(SLV_ADDR_SPACE_SZ,
> -		pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_2_3_3);
> +		pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
>  
>  	val = readl(pcie->parf + PARF_PHY_CTRL);
>  	val &= ~PHY_TEST_PWR_DOWN;