[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAOMZO5DnEL=UFO_Y1N2o9rAW3d+BddavNWCrVi7sVf7Q0xmdxg@mail.gmail.com>
Date: Tue, 4 Jul 2023 11:44:34 -0300
From: Fabio Estevam <festevam@...il.com>
To: Hugo Villeneuve <hugo@...ovil.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
NXP Linux Team <linux-imx@....com>,
Hugo Villeneuve <hvilleneuve@...onoff.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: imx8mn-var-som: add missing pull-up for
onboard PHY reset pinmux
On Tue, Jul 4, 2023 at 10:48 AM Hugo Villeneuve <hugo@...ovil.com> wrote:
>
> From: Hugo Villeneuve <hvilleneuve@...onoff.com>
>
> For SOMs with an onboard PHY, the RESET_N pull-up resistor is
> currently deactivated in the pinmux configuration. When the pinmux
> code selects the GPIO function for this pin, with a default direction
> of input, this prevents the RESET_N pin from being taken to the proper
> 3.3V level (deasserted), and this results in the PHY being not
> detected since it is held in reset.
>
> Taken from RESET_N pin description in ADIN13000 datasheet:
> This pin requires a 1K pull-up resistor to AVDD_3P3.
>
> Activate the pull-up resistor to fix the issue.
>
> Fixes: ade0176dd8a0 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module")
> Signed-off-by: Hugo Villeneuve <hvilleneuve@...onoff.com>
Reviewed-by: Fabio Estevam <festevam@...il.com>
Powered by blists - more mailing lists