[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAOMZO5CX8WzaNeHmE8ohT2_6F-ehRRNWGnF7Dji=uLGphY4q2A@mail.gmail.com>
Date: Tue, 4 Jul 2023 13:33:10 -0300
From: Fabio Estevam <festevam@...il.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Pierluigi Passaro <pierluigi.p@...iscite.com>,
Nate Drude <nate.d@...iscite.com>
Cc: Hugo Villeneuve <hugo@...ovil.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
NXP Linux Team <linux-imx@....com>,
Hugo Villeneuve <hvilleneuve@...onoff.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: imx8mn-var-som-symphony: fix USB OTG
Adding some Variscite folks in case they can help to clarify.
On Tue, Jul 4, 2023 at 1:20 PM Krzysztof Kozlowski
<krzysztof.kozlowski@...aro.org> wrote:
>
> On 04/07/2023 17:31, Hugo Villeneuve wrote:
> > On Tue, 4 Jul 2023 17:08:12 +0200
> > Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org> wrote:
> >
> >> On 04/07/2023 17:02, Hugo Villeneuve wrote:
> >>> From: Hugo Villeneuve <hvilleneuve@...onoff.com>
> >>>
> >>> USB OTG is currently broken on the Variscite Symphony EVK and imx8mn
> >>> nano SOM.
> >>>
> >>> Import changes from linux-5.15 branch of doen't giveto fix it.
> >>>
> >>> Link: https://github.com/varigit/linux-imx.git
> >>> Fixes: 7358e05bddca ("arm64: dts: imx8mn-var-som-symphony: Add Variscite Symphony board with VAR-SOM-MX8MN")
> >>> Signed-off-by: Hugo Villeneuve <hvilleneuve@...onoff.com>
> >>> ---
> >>> .../dts/freescale/imx8mn-var-som-symphony.dts | 37 ++++++++++++++++++-
> >>> 1 file changed, 35 insertions(+), 2 deletions(-)
> >>>
> >>> diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
> >>> index 406a711486da..aef89198f24c 100644
> >>> --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
> >>> +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
> >>> @@ -6,6 +6,7 @@
> >>>
> >>> /dts-v1/;
> >>>
> >>> +#include <dt-bindings/usb/pd.h>
> >>> #include "imx8mn-var-som.dtsi"
> >>>
> >>> / {
> >>> @@ -104,10 +105,29 @@ extcon_usbotg1: typec@3d {
> >>> compatible = "nxp,ptn5150";
> >>> reg = <0x3d>;
> >>> interrupt-parent = <&gpio1>;
> >>> - interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
> >>> + interrupts = <11 IRQ_TYPE_NONE>;
> >>
> >> That's surprising, why?
> >
> > Hi,
> > the varigit repos log or source code has no information about this
> > particular configuration.
> >
> > In the schematics, the interrupt output pin of the PTN5150 is connected
> > to two different resistors, one of these being connected to GPIO1 pin
> > 11. But these two resistors are not assembled on any versions of the
> > board, so the interrupt pin is currently not used.
>
> OK, so there is no interrupt, but not interrupt of type none. Just drop
> the property and make it optional in the bindings. The driver however
> requires the interrupt, so I wonder how the device is going to work
> without it?
>
> Are you sure that interrupt line is not shorted instead of missing resistor?
>
> Best regards,
> Krzysztof
>
Powered by blists - more mailing lists