[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230705205954.4159781-1-Frank.Li@nxp.com>
Date: Wed, 5 Jul 2023 16:59:53 -0400
From: Frank Li <Frank.Li@....com>
To: suzuki.poulose@....com, coresight@...ts.linaro.org,
imx@...ts.linux.dev, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Marek Vasut <marex@...x.de>, Peng Fan <peng.fan@....com>,
Alexander Stein <alexander.stein@...tq-group.com>,
Lucas Stach <l.stach@...gutronix.de>,
Adam Ford <aford173@...il.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS),
linux-arm-kernel@...ts.infradead.org (moderated list:ARM/FREESCALE IMX
/ MXC ARM ARCHITECTURE), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH 1/1] arm64: dts: imx8mp: remove arm,primecell-periphid at etm nodes
The reg size of etm nodes is incorrectly set to 64k instead of 4k. This
leads to a crash when calling amba_read_periphid(). After corrected reg
size, amba_read_periphid() retrieve the correct periphid.
arm,primecell-periphid were removed from the etm nodes.
Signed-off-by: Frank Li <Frank.Li@....com>
---
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index cc406bb338fe..e0ca82ff6f15 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -306,8 +306,7 @@ soc: soc@0 {
etm0: etm@...40000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x28440000 0x10000>;
- arm,primecell-periphid = <0xbb95d>;
+ reg = <0x28440000 0x1000>;
cpu = <&A53_0>;
clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
clock-names = "apb_pclk";
@@ -323,8 +322,7 @@ etm0_out_port: endpoint {
etm1: etm@...40000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x28540000 0x10000>;
- arm,primecell-periphid = <0xbb95d>;
+ reg = <0x28540000 0x1000>;
cpu = <&A53_1>;
clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
clock-names = "apb_pclk";
@@ -340,8 +338,7 @@ etm1_out_port: endpoint {
etm2: etm@...40000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x28640000 0x10000>;
- arm,primecell-periphid = <0xbb95d>;
+ reg = <0x28640000 0x1000>;
cpu = <&A53_2>;
clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
clock-names = "apb_pclk";
@@ -357,8 +354,7 @@ etm2_out_port: endpoint {
etm3: etm@...40000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x28740000 0x10000>;
- arm,primecell-periphid = <0xbb95d>;
+ reg = <0x28740000 0x1000>;
cpu = <&A53_3>;
clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
clock-names = "apb_pclk";
--
2.34.1
Powered by blists - more mailing lists