lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZKUceu9iJuAAeYYT@matsya>
Date:   Wed, 5 Jul 2023 13:02:10 +0530
From:   Vinod Koul <vkoul@...nel.org>
To:     Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
Cc:     linux-serial@...r.kernel.org,
        Robert Baldyga <r.baldyga@...sung.com>,
        dmaengine@...r.kernel.org, linux-kernel@...r.kernel.org,
        Richard Tresidder <rtresidd@...ctromag.com.au>,
        stable@...r.kernel.org
Subject: Re: [PATCH] dmaengine: pl330: Return DMA_PAUSED when transaction is
 paused

On 26-05-23, 13:54, Ilpo Järvinen wrote:
> pl330_pause() does not set anything to indicate paused condition which
> causes pl330_tx_status() to return DMA_IN_PROGRESS. This breaks 8250
> DMA flush after the fix in commit 57e9af7831dc ("serial: 8250_dma: Fix
> DMA Rx rearm race"). The function comment for pl330_pause() claims
> pause is supported but resume is not which is enough for 8250 DMA flush
> to work as long as DMA status reports DMA_PAUSED when appropriate.
> 
> Add PAUSED state for descriptor and mark BUSY descriptors with PAUSED
> in pl330_pause(). Return DMA_PAUSED from pl330_tx_status() when the
> descriptor is PAUSED.

Have you noticed the comment in the code which reads:

/*
 * We don't support DMA_RESUME command because of hardware
 * limitations, so after pausing the channel we cannot restore
 * it to active state. We have to terminate channel and setup
 * DMA transfer again. This pause feature was implemented to
 * allow safely read residue before channel termination.
 */

So driver just stops when in pause.

Now the commit 57e9af7831dc returns when in progress state, so am not
sure how returning Paused would help here?

> 
> Reported-by: Richard Tresidder <rtresidd@...ctromag.com.au>
> Tested-by: Richard Tresidder <rtresidd@...ctromag.com.au>
> Fixes: 88987d2c7534 ("dmaengine: pl330: add DMA_PAUSE feature")
> Cc: stable@...r.kernel.org
> Link: https://lore.kernel.org/linux-serial/f8a86ecd-64b1-573f-c2fa-59f541083f1a@electromag.com.au/
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
> ---
> 
> $ diff -u <(git grep -l -e '\.device_pause' -e '->device_pause') <(git grep -l DMA_PAUSED)
> 
> ...tells there might a few other drivers which do not properly return
> DMA_PAUSED status despite having a pause function.
> 
>  drivers/dma/pl330.c | 18 ++++++++++++++++--
>  1 file changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
> index 0d9257fbdfb0..daad25f2c498 100644
> --- a/drivers/dma/pl330.c
> +++ b/drivers/dma/pl330.c
> @@ -403,6 +403,12 @@ enum desc_status {
>  	 * of a channel can be BUSY at any time.
>  	 */
>  	BUSY,
> +	/*
> +	 * Pause was called while descriptor was BUSY. Due to hardware
> +	 * limitations, only termination is possible for descriptors
> +	 * that have been paused.
> +	 */
> +	PAUSED,
>  	/*
>  	 * Sitting on the channel work_list but xfer done
>  	 * by PL330 core
> @@ -2041,7 +2047,7 @@ static inline void fill_queue(struct dma_pl330_chan *pch)
>  	list_for_each_entry(desc, &pch->work_list, node) {
>  
>  		/* If already submitted */
> -		if (desc->status == BUSY)
> +		if (desc->status == BUSY || desc->status == PAUSED)
>  			continue;
>  
>  		ret = pl330_submit_req(pch->thread, desc);
> @@ -2326,6 +2332,7 @@ static int pl330_pause(struct dma_chan *chan)
>  {
>  	struct dma_pl330_chan *pch = to_pchan(chan);
>  	struct pl330_dmac *pl330 = pch->dmac;
> +	struct dma_pl330_desc *desc;
>  	unsigned long flags;
>  
>  	pm_runtime_get_sync(pl330->ddma.dev);
> @@ -2335,6 +2342,10 @@ static int pl330_pause(struct dma_chan *chan)
>  	_stop(pch->thread);
>  	spin_unlock(&pl330->lock);
>  
> +	list_for_each_entry(desc, &pch->work_list, node) {
> +		if (desc->status == BUSY)
> +			desc->status = PAUSED;
> +	}
>  	spin_unlock_irqrestore(&pch->lock, flags);
>  	pm_runtime_mark_last_busy(pl330->ddma.dev);
>  	pm_runtime_put_autosuspend(pl330->ddma.dev);
> @@ -2425,7 +2436,7 @@ pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
>  		else if (running && desc == running)
>  			transferred =
>  				pl330_get_current_xferred_count(pch, desc);
> -		else if (desc->status == BUSY)
> +		else if (desc->status == BUSY || desc->status == PAUSED)
>  			/*
>  			 * Busy but not running means either just enqueued,
>  			 * or finished and not yet marked done
> @@ -2442,6 +2453,9 @@ pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
>  			case DONE:
>  				ret = DMA_COMPLETE;
>  				break;
> +			case PAUSED:
> +				ret = DMA_PAUSED;
> +				break;
>  			case PREP:
>  			case BUSY:
>  				ret = DMA_IN_PROGRESS;
> -- 
> 2.30.2

-- 
~Vinod

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ