| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230705-b4-amlogic-bindings-convert-take2-v2-2-22be915ddc3b@linaro.org>
Date: Wed, 05 Jul 2023 13:41:52 +0200
From: Neil Armstrong <neil.armstrong@...aro.org>
To: Jerome Brunet <jbrunet@...libre.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Kevin Hilman <khilman@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Cc: linux-amlogic@...ts.infradead.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Neil Armstrong <neil.armstrong@...aro.org>
Subject: [PATCH v2 2/3] dt-bindings: clock: amlogic: convert
amlogic,gxbb-aoclkc.txt to dt-schema
Convert the Amlogic Always-On Clock Controller bindings to dt-schema.
Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
---
.../bindings/clock/amlogic,gxbb-aoclkc.txt | 64 -------------
.../bindings/clock/amlogic,gxbb-aoclkc.yaml | 101 +++++++++++++++++++++
2 files changed, 101 insertions(+), 64 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
deleted file mode 100644
index c41f0be5d438..000000000000
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* Amlogic GXBB AO Clock and Reset Unit
-
-The Amlogic GXBB AO clock controller generates and supplies clock to various
-controllers within the Always-On part of the SoC.
-
-Required Properties:
-
-- compatible: value should be different for each SoC family as :
- - GXBB (S905) : "amlogic,meson-gxbb-aoclkc"
- - GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
- - GXM (S912) : "amlogic,meson-gxm-aoclkc"
- - AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc"
- - G12A (S905X2, S905D2, S905Y2) : "amlogic,meson-g12a-aoclkc"
- followed by the common "amlogic,meson-gx-aoclkc"
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
- * "xtal" : the platform xtal
- * "mpeg-clk" : the main clock controller mother clock (aka clk81)
- * "ext-32k-0" : external 32kHz reference #0 if any (optional)
- * "ext-32k-1" : external 32kHz reference #1 if any (optional - gx only)
- * "ext-32k-2" : external 32kHz reference #2 if any (optional - gx only)
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/gxbb-aoclkc.h header and can be
-used in device tree sources.
-
-- #reset-cells: should be 1.
-
-Each reset is assigned an identifier and client nodes can use this identifier
-to specify the reset which they consume. All available resets are defined as
-preprocessor macros in the dt-bindings/reset/gxbb-aoclkc.h header and can be
-used in device tree sources.
-
-Parent node should have the following properties :
-- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
-- reg: base address and size of the AO system control register space.
-
-Example: AO Clock controller node:
-
-ao_sysctrl: sys-ctrl@0 {
- compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
- reg = <0x0 0x0 0x0 0x100>;
-
- clkc_AO: clock-controller {
- compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
- #clock-cells = <1>;
- #reset-cells = <1>;
- clocks = <&xtal>, <&clkc CLKID_CLK81>;
- clock-names = "xtal", "mpeg-clk";
- };
-
-Example: UART controller node that consumes the clock and reset generated
- by the clock controller:
-
- uart_AO: serial@4c0 {
- compatible = "amlogic,meson-uart";
- reg = <0x4c0 0x14>;
- interrupts = <0 90 1>;
- clocks = <&clkc_AO CLKID_AO_UART1>;
- resets = <&clkc_AO RESET_AO_UART1>;
- };
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.yaml
new file mode 100644
index 000000000000..0adcfbcf5c85
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,gxbb-aoclkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Always-On Clock Controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@...aro.org>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - amlogic,meson-gxbb-aoclkc
+ - amlogic,meson-gxl-aoclkc
+ - amlogic,meson-gxm-aoclkc
+ - amlogic,meson-axg-aoclkc
+ - const: amlogic,meson-gx-aoclkc
+ - enum:
+ - amlogic,meson-axg-aoclkc
+ - amlogic,meson-g12a-aoclkc
+
+ clocks:
+ minItems: 2
+ maxItems: 5
+
+ clock-names:
+ minItems: 2
+ maxItems: 5
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#reset-cells'
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - amlogic,meson-gxbb-aoclkc
+
+ then:
+ properties:
+ clock-names:
+ minItems: 2
+ items:
+ - const: xtal
+ - const: mpeg-clk
+ - const: ext-32k-0
+ - const: ext-32k-1
+ - const: ext-32k-2
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - amlogic,meson-g12a-aoclkc
+
+ then:
+ properties:
+ clocks:
+ maxItems: 3
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: xtal
+ - const: mpeg-clk
+ - const: ext-32k-0
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - amlogic,meson-gxl-aoclkc
+ - amlogic,meson-gxm-aoclkc
+ - amlogic,meson-axg-aoclkc
+
+ then:
+ properties:
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: xtal
+ - const: mpeg-clk
+
+additionalProperties: false
--
2.34.1
Powered by blists - more mailing lists