| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230706-unstopped-skedaddle-7168f2b12189-mkl@pengutronix.de>
Date: Thu, 6 Jul 2023 09:25:13 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: Judith Mendez <jm@...com>
Cc: Chandrasekar Ramakrishnan <rcsekar@...sung.com>,
Wolfgang Grandegger <wg@...ndegger.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, linux-can@...r.kernel.org,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Schuyler Patton <spatton@...com>,
Tero Kristo <kristo@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
devicetree@...r.kernel.org,
Oliver Hartkopp <socketcan@...tkopp.net>,
Simon Horman <simon.horman@...igine.com>
Subject: Re: [PATCH 2/2] can: m_can: Add hrtimer to generate software
interrupt
On 05.07.2023 14:53:56, Judith Mendez wrote:
> Introduce timer polling method to MCAN since some SoCs may not
> have M_CAN interrupt routed to A53 Linux and do not have
> interrupt property in device tree M_CAN node.
>
> On AM62x SoC, MCANs on MCU domain do not have hardware interrupt
> routed to A53 Linux, instead they will use timer polling method.
>
> Add an hrtimer to MCAN class device. Each MCAN will have its own
> hrtimer instantiated if there is no hardware interrupt found in
> device tree M_CAN node. The timer will generate a software
> interrupt every 1 ms. In hrtimer callback, we check if there is
> a transaction pending by reading a register, then process by
> calling the isr if there is.
>
> Tested-by: Hiago De Franco <hiago.franco@...adex.com> # Toradex Verdin AM62
> Reviewed-by: Tony Lindgren <tony@...mide.com>
> Signed-off-by: Judith Mendez <jm@...com>
> ---
> Changelog:
> v9:
> - Change add MS to HRTIMER_POLL_INTERVAL
> - Change syntax from "= 0" to "!"
> v8:
> - Cancel hrtimer after interrupts in m_can_stop
> - Move assignment of hrtimer_callback to m_can_class_register()
> - Initialize irq = 0 if polling mode is used
This change has been lost :(
> - Add reson for polling mode in commit msg
> - Remove unrelated change
> - Remove polling flag
> v7:
> - Clean up m_can_platform.c if/else section after removing poll-interval
> - Remove poll-interval from patch description
> v6:
> - Move hrtimer stop/start function calls to m_can_open and m_can_close to
> support power suspend/resume
> v5:
> - Change dev_dbg to dev_info if hardware interrupt exists and polling
> is enabled
> v4:
> - No changes
> v3:
> - Create a define for 1 ms polling interval
> - Change plarform_get_irq to optional to not print error msg
> v2:
> - Add functionality to check for 'poll-interval' property in MCAN node
> - Add 'polling' flag in driver to check if device is using polling method
> - Check for timer polling and hardware interrupt cases, default to
> hardware interrupt method
> - Change ns_to_ktime() to ms_to_ktime()
> ---
> drivers/net/can/m_can/m_can.c | 32 +++++++++++++++++++++++++-
> drivers/net/can/m_can/m_can.h | 3 +++
> drivers/net/can/m_can/m_can_platform.c | 23 +++++++++++++++---
> 3 files changed, 54 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> index c5af92bcc9c9..13fd84b2e2dd 100644
> --- a/drivers/net/can/m_can/m_can.c
> +++ b/drivers/net/can/m_can/m_can.c
> @@ -11,6 +11,7 @@
> #include <linux/bitfield.h>
> #include <linux/can/dev.h>
> #include <linux/ethtool.h>
> +#include <linux/hrtimer.h>
> #include <linux/interrupt.h>
> #include <linux/io.h>
> #include <linux/iopoll.h>
> @@ -308,6 +309,9 @@ enum m_can_reg {
> #define TX_EVENT_MM_MASK GENMASK(31, 24)
> #define TX_EVENT_TXTS_MASK GENMASK(15, 0)
>
> +/* Hrtimer polling interval */
> +#define HRTIMER_POLL_INTERVAL_MS 1
> +
> /* The ID and DLC registers are adjacent in M_CAN FIFO memory,
> * and we can save a (potentially slow) bus round trip by combining
> * reads and writes to them.
> @@ -1414,6 +1418,12 @@ static int m_can_start(struct net_device *dev)
>
> m_can_enable_all_interrupts(cdev);
>
> + if (!dev->irq) {
> + dev_dbg(cdev->dev, "Start hrtimer\n");
> + hrtimer_start(&cdev->hrtimer, ms_to_ktime(HRTIMER_POLL_INTERVAL_MS),
> + HRTIMER_MODE_REL_PINNED);
> + }
> +
> return 0;
> }
>
> @@ -1568,6 +1578,11 @@ static void m_can_stop(struct net_device *dev)
> {
> struct m_can_classdev *cdev = netdev_priv(dev);
>
> + if (!dev->irq) {
> + dev_dbg(cdev->dev, "Stop hrtimer\n");
> + hrtimer_cancel(&cdev->hrtimer);
> + }
> +
> /* disable all interrupts */
> m_can_disable_all_interrupts(cdev);
>
> @@ -1793,6 +1808,18 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
> return NETDEV_TX_OK;
> }
>
> +static enum hrtimer_restart hrtimer_callback(struct hrtimer *timer)
> +{
> + struct m_can_classdev *cdev = container_of(timer, struct
> + m_can_classdev, hrtimer);
> +
> + m_can_isr(0, cdev->net);
> +
> + hrtimer_forward_now(timer, ms_to_ktime(HRTIMER_POLL_INTERVAL_MS));
> +
> + return HRTIMER_RESTART;
> +}
> +
> static int m_can_open(struct net_device *dev)
> {
> struct m_can_classdev *cdev = netdev_priv(dev);
> @@ -1831,7 +1858,7 @@ static int m_can_open(struct net_device *dev)
> err = request_threaded_irq(dev->irq, NULL, m_can_isr,
> IRQF_ONESHOT,
> dev->name, dev);
> - } else {
> + } else if (dev->irq) {
> err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,
> dev);
> }
> @@ -2027,6 +2054,9 @@ int m_can_class_register(struct m_can_classdev *cdev)
> goto clk_disable;
> }
>
> + if (!cdev->net->irq)
> + cdev->hrtimer.function = &hrtimer_callback;
> +
> ret = m_can_dev_setup(cdev);
> if (ret)
> goto rx_offload_del;
> diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
> index a839dc71dc9b..2ac18ac867a4 100644
> --- a/drivers/net/can/m_can/m_can.h
> +++ b/drivers/net/can/m_can/m_can.h
> @@ -15,6 +15,7 @@
> #include <linux/device.h>
> #include <linux/dma-mapping.h>
> #include <linux/freezer.h>
> +#include <linux/hrtimer.h>
> #include <linux/interrupt.h>
> #include <linux/io.h>
> #include <linux/iopoll.h>
> @@ -93,6 +94,8 @@ struct m_can_classdev {
> int is_peripheral;
>
> struct mram_cfg mcfg[MRAM_CFG_NUM];
> +
> + struct hrtimer hrtimer;
> };
>
> struct m_can_classdev *m_can_class_allocate_dev(struct device *dev, int sizeof_priv);
> diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
> index 94dc82644113..76d11ce38220 100644
> --- a/drivers/net/can/m_can/m_can_platform.c
> +++ b/drivers/net/can/m_can/m_can_platform.c
> @@ -5,6 +5,7 @@
> //
> // Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
>
> +#include <linux/hrtimer.h>
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
>
> @@ -96,12 +97,28 @@ static int m_can_plat_probe(struct platform_device *pdev)
> goto probe_fail;
Please set "irq" to 0 during declaration.
>
> addr = devm_platform_ioremap_resource_byname(pdev, "m_can");
> - irq = platform_get_irq_byname(pdev, "int0");
> - if (IS_ERR(addr) || irq < 0) {
> - ret = -EINVAL;
> + if (IS_ERR(addr)) {
> + ret = PTR_ERR(addr);
> goto probe_fail;
> }
>
> + if (device_property_present(mcan_class->dev, "interrupts") ||
> + device_property_present(mcan_class->dev, "interrupt-names")) {
> + irq = platform_get_irq_byname(pdev, "int0");
> + if (irq == -EPROBE_DEFER) {
> + ret = -EPROBE_DEFER;
> + goto probe_fail;
> + }
> + if (irq < 0) {
> + ret = -EINVAL;
Please return the original error value.
> + goto probe_fail;
> + }
> + } else {
> + dev_dbg(mcan_class->dev, "Polling enabled, initialize hrtimer");
> + hrtimer_init(&mcan_class->hrtimer, CLOCK_MONOTONIC,
> + HRTIMER_MODE_REL_PINNED);
> + }
> +
> /* message ram could be shared */
> res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
> if (!res) {
> --
> 2.34.1
>
>
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung Nürnberg | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists