| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230708161259.7af17fa9@jic23-huawei>
Date: Sat, 8 Jul 2023 16:12:59 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Jishnu Prakash <quic_jprakash@...cinc.com>
Cc: <agross@...nel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linus.walleij@...aro.org>,
<Jonathan.Cameron@...wei.com>, <sboyd@...nel.org>,
<dmitry.baryshkov@...aro.org>, <quic_subbaram@...cinc.com>,
<quic_collinsd@...cinc.com>, <quic_kamalw@...cinc.com>,
<quic_jestar@...cinc.com>, <marijn.suijten@...ainline.org>,
<andriy.shevchenko@...ux.intel.com>,
<krzysztof.kozlowski@...aro.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
"Luca Weiss" <luca@...tu.xyz>, <linux-iio@...r.kernel.org>,
<linux-arm-msm@...r.kernel.org>,
<linux-arm-msm-owner@...r.kernel.org>
Subject: Re: [PATCH 06/11] iio: adc: Add QCOM PMIC5 Gen3 ADC bindings
On Sat, 8 Jul 2023 12:58:30 +0530
Jishnu Prakash <quic_jprakash@...cinc.com> wrote:
> For the PMIC5-Gen3 type PMICs, ADC peripheral is present in HW for the
> following PMICs: PMK8550, PM8550, PM8550B and PM8550VX PMICs.
> It is similar to PMIC5-Gen2, with SW communication to ADCs on all PMICs
> going through PBS firmware through a single register interface. This
> interface is implemented on an SDAM peripheral on the master PMIC PMK8550
> rather than a dedicated ADC peripheral.
>
> Signed-off-by: Jishnu Prakash <quic_jprakash@...cinc.com>
> ---
> .../bindings/iio/adc/qcom,spmi-vadc.yaml | 117 ++++++++++++++++--
> .../iio/qcom,spmi-adc5-gen3-pm8550.h | 48 +++++++
> .../iio/qcom,spmi-adc5-gen3-pm8550b.h | 97 +++++++++++++++
> .../iio/qcom,spmi-adc5-gen3-pm8550vx.h | 20 +++
> .../iio/qcom,spmi-adc5-gen3-pmk8550.h | 54 ++++++++
> include/dt-bindings/iio/qcom,spmi-vadc.h | 78 ++++++++++++
> 6 files changed, 402 insertions(+), 12 deletions(-)
> create mode 100644 include/dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550.h
> create mode 100644 include/dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550b.h
> create mode 100644 include/dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550vx.h
> create mode 100644 include/dt-bindings/iio/qcom,spmi-adc5-gen3-pmk8550.h
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> index eb7d16e385ad..090113e62d52 100644
> --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> @@ -13,8 +13,8 @@ maintainers:
> description: |
> SPMI PMIC voltage ADC (VADC) provides interface to clients to read
> voltage. The VADC is a 15-bit sigma-delta ADC.
> - SPMI PMIC5/PMIC5 Gen2 voltage ADC (ADC) provides interface to clients to read
> - voltage. The VADC is a 16-bit sigma-delta ADC.
> + SPMI PMIC5/PMIC5 Gen2/PMIC5 Gen3 voltage ADC (ADC) provides interface to
> + clients to read voltage. The VADC is a 16-bit sigma-delta ADC.
>
> properties:
> compatible:
> @@ -27,10 +27,11 @@ properties:
> - qcom,spmi-adc5
> - qcom,spmi-adc-rev2
> - qcom,spmi-adc5-gen2
> + - qcom,spmi-adc5-gen3
>
> reg:
> description: VADC base address in the SPMI PMIC register map
> - maxItems: 1
> + minItems: 1
?
>
> '#address-cells':
> const: 1
> @@ -38,6 +39,12 @@ properties:
> '#size-cells':
> const: 0
>
> + "#thermal-sensor-cells":
> + const: 1
> + description:
> + Number of cells required to uniquely identify the thermal sensors. Since
> + we have multiple sensors this is set to 1.
> +
Defined only for the new gen3? If so make make it false for the other devices.
> '#io-channel-cells':
> const: 1
>
> @@ -71,8 +78,8 @@ patternProperties:
> description: |
> ADC channel number.
> See include/dt-bindings/iio/qcom,spmi-vadc.h
> - For PMIC5 Gen2 ADC, the channel numbers are specified separately per PMIC
> - in the PMIC-specific files in include/dt-bindings/iio/.
> + For PMIC5 Gen2 and PMIC5 Gen3 ADC, the channel numbers are specified separately per
> + PMIC in the PMIC-specific files in include/dt-bindings/iio/.
>
> label:
> $ref: /schemas/types.yaml#/definitions/string
> @@ -114,11 +121,12 @@ patternProperties:
> channel calibration. If property is not found, channel will be
> calibrated with 0.625V and 1.25V reference channels, also
> known as absolute calibration.
> - - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc5-gen2" and
> - "qcom,spmi-adc-rev2", if this property is specified VADC will use
> - the VDD reference (1.875V) and GND for channel calibration. If
> - property is not found, channel will be calibrated with 0V and 1.25V
> - reference channels, also known as absolute calibration.
> + - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc5-gen2",
> + "qcom,spmi-adc-rev2" and "qcom,spmi-adc5-gen3", if this property
> + is specified VADC will use the VDD reference (1.875V) and GND for
> + channel calibration. If property is not found, channel will be
> + calibrated with 0V and 1.25V reference channels, also known as
> + absolute calibration.
> type: boolean
>
> qcom,hw-settle-time:
> @@ -136,6 +144,12 @@ patternProperties:
> from the ADC that is an average of multiple samples. The value
> selected is 2^(value).
>
> + qcom,adc-tm-type:
> + description: |
> + Indicates if ADC_TM monitoring is done on this channel.
> + Defined for compatible property "qcom,spmi-adc5-gen3".
> + type: boolean
Enforce that in the binding, not via a comment. Once the binding
performs that check (set it to false for non matching compatibles) then
there is no need to also mention it in text.
> +
> required:
> - reg
>
> @@ -213,7 +227,9 @@ allOf:
> properties:
> compatible:
> contains:
> - const: qcom,spmi-adc5-gen2
> + enum:
> + - qcom,spmi-adc5-gen2
> + - qcom,spmi-adc5-gen3
Side note - it's fine to have a single element enum, so you could
use that option to reduce churn in this set...
>
> then:
> patternProperties:
> @@ -299,7 +315,7 @@ examples:
> label = "xo_therm";
> };
>
> - channel@47 {
> + channel@147 {
? If that's a valid change, then it looks like a separate fix.
> reg = <PM8350_ADC5_GEN2_AMUX_THM4_100K_PU(1)>;
> qcom,ratiometric;
> qcom,hw-settle-time = <200>;
> @@ -307,3 +323,80 @@ examples:
> };
> };
> };
> +
> + - |
> + #include <dt-bindings/iio/qcom,spmi-adc5-gen3-pmk8550.h>
> + #include <dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550.h>
> + #include <dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550b.h>
> + #include <dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550vx.h>
> +
> + pmic {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* VADC node */
> + pmk8550_vadc: vadc@...0 {
> + compatible = "qcom,spmi-adc5-gen3";
> + reg = <0x9000>;
> + interrupts = <0x0 0x90 0x1 IRQ_TYPE_EDGE_RISING>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #io-channel-cells = <1>;
> + #thermal-sensor-cells = <1>;
> +
> + /* PMK8550 Channel nodes */
> + channel@3 {
> + reg = <PMK8550_ADC5_GEN3_DIE_TEMP>;
> + label = "pmk8550_die_temp";
> + qcom,pre-scaling = <1 1>;
> + };
> +
> + channel@44 {
> + reg = <PMK8550_ADC5_GEN3_AMUX_THM1_XO_THERM_100K_PU>;
> + label = "pmk8550_xo_therm";
> + qcom,pre-scaling = <1 1>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,adc-tm-type;
> + };
> +
> + /* PM8550 Channel nodes */
> + channel@103 {
> + reg = <PM8550_ADC5_GEN3_DIE_TEMP>;
> + label = "pm8550_die_temp";
> + qcom,pre-scaling = <1 1>;
> + };
> +
> + channel@18e {
> + reg = <PM8550_ADC5_GEN3_VPH_PWR>;
> + label = "pm8550_vph_pwr";
> + qcom,pre-scaling = <1 3>;
> + };
> +
> + /* PM8550B Channel nodes */
> + channel@703 {
> + reg = <PM8550B_ADC5_GEN3_DIE_TEMP>;
> + label = "pm8550b_die_temp";
> + qcom,pre-scaling = <1 1>;
> + };
> +
> + channel@78e {
> + reg = <PM8550B_ADC5_GEN3_VPH_PWR>;
> + label = "pm8550b_vph_pwr";
> + qcom,pre-scaling = <1 3>;
> + };
> +
> + channel@78f {
> + reg = <PM8550B_ADC5_GEN3_VBAT_SNS_QBG>;
> + label = "pm8550b_vbat_sns_qbg";
> + qcom,pre-scaling = <1 3>;
> + };
> +
> + /* PM8550VS_C Channel nodes */
> + channel@203 {
> + reg = <PM8550VS_ADC5_GEN3_DIE_TEMP(2)>;
> + label = "pm8550vs_c_die_temp";
> + qcom,pre-scaling = <1 1>;
> + };
> + };
> + };
> diff --git a/include/dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550.h b/include/dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550.h
> new file mode 100644
> index 000000000000..74e6e2f6f9ed
> --- /dev/null
> +++ b/include/dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550.h
> @@ -0,0 +1,48 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PM8550_H
> +#define _DT_BINDINGS_QCOM_SPMI_VADC_PM8550_H
> +
> +#ifndef PM8550_SID
> +#define PM8550_SID 1
> +#endif
> +
> +/* ADC channels for PM8550_ADC for PMIC5 Gen3 */
> +#define PM8550_ADC5_GEN3_OFFSET_REF (PM8550_SID << 8 | 0x00)
can we do the naming for the 0x00 as per Dmitry's set? That is get them from
qcom,spmi-vadc.h
https://patchwork.kernel.org/project/linux-iio/patch/20230707123027.1510723-2-dmitry.baryshkov@linaro.org/
> +#define PM8550_ADC5_GEN3_1P25VREF (PM8550_SID << 8 | 0x01)
> +#define PM8550_ADC5_GEN3_VREF_VADC (PM8550_SID << 8 | 0x02)
> +#define PM8550_ADC5_GEN3_DIE_TEMP (PM8550_SID << 8 | 0x03)
> +
> diff --git a/include/dt-bindings/iio/qcom,spmi-vadc.h b/include/dt-bindings/iio/qcom,spmi-vadc.h
> index b1413c62ad27..ca5a0a947b3b 100644
> --- a/include/dt-bindings/iio/qcom,spmi-vadc.h
> +++ b/include/dt-bindings/iio/qcom,spmi-vadc.h
> @@ -298,4 +298,82 @@
> #define ADC5_GEN2_SBUx 0x94
> #define ADC5_GEN2_VBAT_2S_MID 0x96
>
> +/* ADC channels for PMIC5 Gen3 */
> +
> +#define ADC5_GEN3_OFFSET_REF 0x00
> +#define ADC5_GEN3_1P25VREF 0x01
> +#define ADC5_GEN3_VREF_VADC 0x02
> +#define ADC5_GEN3_DIE_TEMP 0x03
Powered by blists - more mailing lists