linux-kernel - [PATCH 2/2] net: phy: dp83822: Add support for line class driver configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230710175621.8612-3-vesa.jaaskelainen@vaisala.com>
Date:   Mon, 10 Jul 2023 20:56:20 +0300
From:   Vesa Jääskeläinen 
        <vesa.jaaskelainen@...sala.com>
To:     unlisted-recipients:; (no To-header on input)
Cc:     vesa.jaaskelainen@...sala.com,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        Andrew Davis <afd@...com>, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] net: phy: dp83822: Add support for line class driver configuration

Line driver can be configured either in Class A or in Class B modes.

By default the PHY is in Class B mode.

Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@...sala.com>
---
 drivers/net/phy/dp83822.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index b7cb71817780..5c144d22b64e 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -31,12 +31,17 @@
 #define MII_DP83822_FCSCR	0x14
 #define MII_DP83822_RCSR	0x17
 #define MII_DP83822_RESET_CTRL	0x1f
+#define MII_DP83822_LDCSEL	0x404
 #define MII_DP83822_GENCFG	0x465
 #define MII_DP83822_SOR1	0x467
 
 /* GENCFG */
 #define DP83822_SIG_DET_LOW	BIT(0)
 
+/* Line Driver Class Selection (LDCSEL) */
+#define DP83822_LDCSEL_CLASS_A	0x24
+#define DP83822_LDCSEL_CLASS_B	0x20
+
 /* Control Register 2 bits */
 #define DP83822_FX_ENABLE	BIT(14)
 
@@ -118,6 +123,7 @@ struct dp83822_private {
 	bool fx_signal_det_low;
 	int fx_enabled;
 	u16 fx_sd_enable;
+	bool line_driver_class_a;
 };
 
 static int dp83822_set_wol(struct phy_device *phydev,
@@ -416,6 +422,16 @@ static int dp83822_config_init(struct phy_device *phydev)
 					MII_DP83822_RCSR, DP83822_RGMII_MODE_EN);
 	}
 
+	/* Configure line driver class */
+	if (dp83822->line_driver_class_a)
+		/* full MLT-3 on both Tx+ and Tx–.*/
+		phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_LDCSEL,
+			      DP83822_LDCSEL_CLASS_A);
+	else
+		/* reduced MLT-3 */
+		phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_LDCSEL,
+			      DP83822_LDCSEL_CLASS_B);
+
 	if (dp83822->fx_enabled) {
 		err = phy_modify(phydev, MII_DP83822_CTRL_2,
 				 DP83822_FX_ENABLE, 1);
@@ -507,6 +523,12 @@ static int dp83822_of_init(struct phy_device *phydev)
 		dp83822->fx_enabled = device_property_present(dev,
 							      "ti,fiber-mode");
 
+	/* DP83822 defaults to line driver class B - enable configuration for
+	 * class A
+	 */
+	dp83822->line_driver_class_a = device_property_present(dev,
+							       "ti,line-driver-class-a");
+
 	return 0;
 }
 #else
-- 
2.34.1