| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230710053550.89160-2-danishanwar@ti.com>
Date: Mon, 10 Jul 2023 11:05:49 +0530
From: MD Danish Anwar <danishanwar@...com>
To: Randy Dunlap <rdunlap@...radead.org>,
Roger Quadros <rogerq@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Andrew Lunn <andrew@...n.ch>,
Richard Cochran <richardcochran@...il.com>,
Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Jakub Kicinski <kuba@...nel.org>,
Eric Dumazet <edumazet@...gle.com>,
"David S. Miller" <davem@...emloft.net>,
MD Danish Anwar <danishanwar@...com>
CC: <nm@...com>, <srk@...com>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>, <netdev@...r.kernel.org>,
<linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH v8 1/2] dt-bindings: net: Add ICSSG Ethernet
Add a YAML binding document for the ICSSG Programmable real time unit
based Ethernet hardware. The ICSSG driver uses the PRU and PRUSS consumer
APIs to interface the PRUs and load/run the firmware for supporting
ethernet functionality.
Reviewed-by: Rob Herring <robh@...nel.org>
Signed-off-by: MD Danish Anwar <danishanwar@...com>
---
.../bindings/net/ti,icssg-prueth.yaml | 184 ++++++++++++++++++
1 file changed, 184 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
new file mode 100644
index 000000000000..8ec30b3eb760
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,icssg-prueth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ICSSG PRUSS Ethernet
+
+maintainers:
+ - Md Danish Anwar <danishanwar@...com>
+
+description:
+ Ethernet based on the Programmable Real-Time Unit and Industrial
+ Communication Subsystem.
+
+allOf:
+ - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,am654-icssg-prueth # for AM65x SoC family
+
+ sram:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to MSMC SRAM node
+
+ dmas:
+ maxItems: 10
+
+ dma-names:
+ items:
+ - const: tx0-0
+ - const: tx0-1
+ - const: tx0-2
+ - const: tx0-3
+ - const: tx1-0
+ - const: tx1-1
+ - const: tx1-2
+ - const: tx1-3
+ - const: rx0
+ - const: rx1
+
+ ti,mii-g-rt:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to MII_G_RT module's syscon regmap.
+
+ ti,mii-rt:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to MII_RT module's syscon regmap
+
+ interrupts:
+ maxItems: 2
+ description:
+ Interrupt specifiers to TX timestamp IRQ.
+
+ interrupt-names:
+ items:
+ - const: tx_ts0
+ - const: tx_ts1
+
+ ethernet-ports:
+ type: object
+ additionalProperties: false
+
+ properties:
+ '#address-cells':
+ const: 1
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ ^port@[0-1]$:
+ type: object
+ description: ICSSG PRUETH external ports
+ $ref: ethernet-controller.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ items:
+ - enum: [0, 1]
+ description: ICSSG PRUETH port number
+
+ interrupts:
+ maxItems: 1
+
+ ti,syscon-rgmii-delay:
+ items:
+ - items:
+ - description: phandle to system controller node
+ - description: The offset to ICSSG control register
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ phandle to system controller node and register offset
+ to ICSSG control register for RGMII transmit delay
+
+ required:
+ - reg
+ anyOf:
+ - required:
+ - port@0
+ - required:
+ - port@1
+
+required:
+ - compatible
+ - sram
+ - dmas
+ - dma-names
+ - ethernet-ports
+ - ti,mii-g-rt
+ - interrupts
+ - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ /* Example k3-am654 base board SR2.0, dual-emac */
+ pruss2_eth: ethernet {
+ compatible = "ti,am654-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg2_rgmii_pins_default>;
+ sram = <&msmc_ram>;
+
+ ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>,
+ <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>;
+ firmware-name = "ti-pruss/am65x-pru0-prueth-fw.elf",
+ "ti-pruss/am65x-rtu0-prueth-fw.elf",
+ "ti-pruss/am65x-txpru0-prueth-fw.elf",
+ "ti-pruss/am65x-pru1-prueth-fw.elf",
+ "ti-pruss/am65x-rtu1-prueth-fw.elf",
+ "ti-pruss/am65x-txpru1-prueth-fw.elf";
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>,
+ <2>, /* MII mode */
+ <2>,
+ <2>;
+ dmas = <&main_udmap 0xc300>, /* egress slice 0 */
+ <&main_udmap 0xc301>, /* egress slice 0 */
+ <&main_udmap 0xc302>, /* egress slice 0 */
+ <&main_udmap 0xc303>, /* egress slice 0 */
+ <&main_udmap 0xc304>, /* egress slice 1 */
+ <&main_udmap 0xc305>, /* egress slice 1 */
+ <&main_udmap 0xc306>, /* egress slice 1 */
+ <&main_udmap 0xc307>, /* egress slice 1 */
+ <&main_udmap 0x4300>, /* ingress slice 0 */
+ <&main_udmap 0x4301>; /* ingress slice 1 */
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1";
+ ti,mii-g-rt = <&icssg2_mii_g_rt>;
+ interrupt-parent = <&icssg2_intc>;
+ interrupts = <24 0 2>, <25 1 3>;
+ interrupt-names = "tx_ts0", "tx_ts1";
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pruss2_emac0: port@0 {
+ reg = <0>;
+ phy-handle = <&pruss2_eth0_phy>;
+ phy-mode = "rgmii-id";
+ interrupts-extended = <&icssg2_intc 24>;
+ ti,syscon-rgmii-delay = <&scm_conf 0x4120>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ pruss2_emac1: port@1 {
+ reg = <1>;
+ phy-handle = <&pruss2_eth1_phy>;
+ phy-mode = "rgmii-id";
+ interrupts-extended = <&icssg2_intc 25>;
+ ti,syscon-rgmii-delay = <&scm_conf 0x4124>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
--
2.34.1
Powered by blists - more mailing lists