[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230710090929.1873646-1-wenst@chromium.org>
Date: Mon, 10 Jul 2023 17:09:27 +0800
From: Chen-Yu Tsai <wenst@...omium.org>
To: Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Robert Foss <rfoss@...nel.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Xin Ji <xji@...logixsemi.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
Cc: Chen-Yu Tsai <wenst@...omium.org>,
NĂcolas F. R. A. Prado
<nfraprado@...labora.com>, David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: [PATCH RESEND] drm/bridge: anx7625: Use common macros for DP power sequencing commands
The DRM DP code has macros for the DP power sequencing commands. Use
them in the anx7625 driver instead of raw numbers.
Fixes: 548b512e144f ("drm/bridge: anx7625: send DPCD command to downstream")
Fixes: 27f26359de9b ("drm/bridge: anx7625: Set downstream sink into normal status")
Signed-off-by: Chen-Yu Tsai <wenst@...omium.org>
Reviewed-by: NĂcolas F. R. A. Prado <nfraprado@...labora.com>
---
Collected tags and rebased on v6.5-rc1.
drivers/gpu/drm/bridge/analogix/anx7625.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 8b985efdc086..9db3784cb554 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -931,8 +931,8 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
dev_dbg(dev, "set downstream sink into normal\n");
/* Downstream sink enter into normal mode */
- data = 1;
- ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data);
+ data = DP_SET_POWER_D0;
+ ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, DP_SET_POWER, 1, &data);
if (ret < 0)
dev_err(dev, "IO error : set sink into normal mode fail\n");
@@ -971,8 +971,8 @@ static void anx7625_dp_stop(struct anx7625_data *ctx)
dev_dbg(dev, "notify downstream enter into standby\n");
/* Downstream monitor enter into standby mode */
- data = 2;
- ret |= anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data);
+ data = DP_SET_POWER_D3;
+ ret |= anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, DP_SET_POWER, 1, &data);
if (ret < 0)
DRM_DEV_ERROR(dev, "IO error : mute video fail\n");
--
2.41.0.255.g8b1d071c50-goog
Powered by blists - more mailing lists