lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230710094321.1378351-3-apatel@ventanamicro.com>
Date:   Mon, 10 Jul 2023 15:13:14 +0530
From:   Anup Patel <apatel@...tanamicro.com>
To:     Palmer Dabbelt <palmer@...belt.com>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Marc Zyngier <maz@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc:     Atish Patra <atishp@...shpatra.org>,
        Andrew Jones <ajones@...tanamicro.com>,
        Sunil V L <sunilvl@...tanamicro.com>,
        Conor Dooley <conor@...nel.org>,
        Saravana Kannan <saravanak@...gle.com>,
        Anup Patel <anup@...infault.org>,
        linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, Anup Patel <apatel@...tanamicro.com>
Subject: [PATCH v5 2/9] irqchip/riscv-intc: Add support for RISC-V AIA

The RISC-V advanced interrupt architecture (AIA) extends the per-HART
local interrupts in following ways:
1. Minimum 64 local interrupts for both RV32 and RV64
2. Ability to process multiple pending local interrupts in same
   interrupt handler
3. Priority configuration for each local interrupts
4. Special CSRs to configure/access the per-HART MSI controller

This patch adds support for RISC-V AIA in the RISC-V intc driver.

Signed-off-by: Anup Patel <apatel@...tanamicro.com>
---
 drivers/irqchip/irq-riscv-intc.c | 36 ++++++++++++++++++++++++++------
 1 file changed, 30 insertions(+), 6 deletions(-)

diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index 4adeee1bc391..e235bf1708a4 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/smp.h>
+#include <asm/hwcap.h>
 
 static struct irq_domain *intc_domain;
 
@@ -30,6 +31,15 @@ static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
 	generic_handle_domain_irq(intc_domain, cause);
 }
 
+static asmlinkage void riscv_intc_aia_irq(struct pt_regs *regs)
+{
+	unsigned long topi;
+
+	while ((topi = csr_read(CSR_TOPI)))
+		generic_handle_domain_irq(intc_domain,
+					  topi >> TOPI_IID_SHIFT);
+}
+
 /*
  * On RISC-V systems local interrupts are masked or unmasked by writing
  * the SIE (Supervisor Interrupt Enable) CSR.  As CSRs can only be written
@@ -39,12 +49,18 @@ static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
 
 static void riscv_intc_irq_mask(struct irq_data *d)
 {
-	csr_clear(CSR_IE, BIT(d->hwirq));
+	if (d->hwirq < BITS_PER_LONG)
+		csr_clear(CSR_IE, BIT(d->hwirq));
+	else
+		csr_clear(CSR_IEH, BIT(d->hwirq - BITS_PER_LONG));
 }
 
 static void riscv_intc_irq_unmask(struct irq_data *d)
 {
-	csr_set(CSR_IE, BIT(d->hwirq));
+	if (d->hwirq < BITS_PER_LONG)
+		csr_set(CSR_IE, BIT(d->hwirq));
+	else
+		csr_set(CSR_IEH, BIT(d->hwirq - BITS_PER_LONG));
 }
 
 static void riscv_intc_irq_eoi(struct irq_data *d)
@@ -115,16 +131,22 @@ static struct fwnode_handle *riscv_intc_hwnode(void)
 
 static int __init riscv_intc_init_common(struct fwnode_handle *fn)
 {
-	int rc;
+	int rc, nr_irqs = BITS_PER_LONG;
+
+	if (riscv_isa_extension_available(NULL, SxAIA) && BITS_PER_LONG == 32)
+		nr_irqs = nr_irqs * 2;
 
-	intc_domain = irq_domain_create_linear(fn, BITS_PER_LONG,
+	intc_domain = irq_domain_create_linear(fn, nr_irqs,
 					       &riscv_intc_domain_ops, NULL);
 	if (!intc_domain) {
 		pr_err("unable to add IRQ domain\n");
 		return -ENXIO;
 	}
 
-	rc = set_handle_irq(&riscv_intc_irq);
+	if (riscv_isa_extension_available(NULL, SxAIA))
+		rc = set_handle_irq(&riscv_intc_aia_irq);
+	else
+		rc = set_handle_irq(&riscv_intc_irq);
 	if (rc) {
 		pr_err("failed to set irq handler\n");
 		return rc;
@@ -132,7 +154,9 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
 
 	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
 
-	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
+	pr_info("%d local interrupts mapped%s\n",
+		nr_irqs, (riscv_isa_extension_available(NULL, SxAIA)) ?
+			 " using AIA" : "");
 
 	return 0;
 }
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ