[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230710103735.1375847-1-quic_ipkumar@quicinc.com>
Date: Mon, 10 Jul 2023 16:07:29 +0530
From: Praveenkumar I <quic_ipkumar@...cinc.com>
To: <agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <amitk@...nel.org>,
<thara.gopinath@...il.com>, <rafael@...nel.org>,
<daniel.lezcano@...aro.org>, <rui.zhang@...el.com>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<conor+dt@...nel.org>, <linux-arm-msm@...r.kernel.org>,
<linux-pm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <quic_varada@...cinc.com>
Subject: [PATCH 0/6] Add IPQ5332 TSENS support
IPQ5332 uses tsens v2.3.3 IP with combined interrupt for
upper/lower and critical. IPQ5332 does not have RPM and
kernel has to take care of TSENS enablement and calibration.
This patch series adds the sensor enablement and calibration
support. On top, adds IPQ5332 TSENS support.
Praveenkumar I (6):
dt-bindings: thermal: tsens: Add nvmem cells for calibration data
thermal/drivers/tsens: Add TSENS enable and calibration support for V2
dt-bindings: thermal: tsens: Add ipq5332 compatible
arm64: dts: qcom: ipq5332: Add tsens node
arm64: dts: qcom: ipq5332: Add thermal zone nodes
thermal/drivers/tsens: Add IPQ5332 support
.../bindings/thermal/qcom-tsens.yaml | 34 +++-
arch/arm64/boot/dts/qcom/ipq5332.dtsi | 185 ++++++++++++++++++
drivers/thermal/qcom/tsens-v2.c | 129 ++++++++++++
drivers/thermal/qcom/tsens.c | 40 +++-
drivers/thermal/qcom/tsens.h | 58 +++++-
5 files changed, 440 insertions(+), 6 deletions(-)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists