[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <56c5add3-d63a-1e47-1b14-2b276e4268b7@foss.st.com>
Date: Tue, 11 Jul 2023 09:57:34 +0200
From: Alexandre TORGUE <alexandre.torgue@...s.st.com>
To: Leonard Göhrs <l.goehrs@...gutronix.de>,
Conor Dooley <conor@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
<linux-kernel@...r.kernel.org>
CC: <kernel@...gutronix.de>
Subject: Re: [PATCH v2 0/8] ARM: dts: stm32: lxa-tac: add Linux Automation
GmbH TAC
Hi Leonard
On 6/14/23 14:32, Leonard Göhrs wrote:
> The Linux Automation Test Automation Controller (LXA TAC)[1] is an embedded
> software development tool built around the Octavo Systems OSD32MP15x SiP.
>
> The device contains an eMMC for storage, a DSA-capable on board ethernet
> switch with two external ports, dual CAN busses, a power switch to turn
> a device under test on or off and some other I/O.
>
> As of now there are two STM32MP157 based hardware generations (Gen 1 and
> Gen 2) that have most of their hardware config in common.
> In the future there will also be a STM32MP153 based hardware generation.
>
> [1]: https://www.linux-automation.com/en/products/lxa-tac.html
>
> V1: https://lore.kernel.org/lkml/20230607115508.2964574-1-l.goehrs@pengutronix.de/
>
> Changes since V1:
>
> - Rebase on top of stm32-next as requested by Alexandre Torgue.
> - Split addition of shineworld lh133k compatible into separate
> vendor-prefix patch and panel-mipi-dbi-spi.yaml patch as suggested
> by Conor Dooley.
> Did not carry over the Reviewed-by: Rob Herring <robh@...nel.org>
> from the original patch due to the split.
> - Drop "dt-bindings: gpio: pca9570: add gpio-line-names property"
> as it is already in gpio/for-next.
> - Replace "dt-bindings: can: m_can: add termination-{gpios,ohms}
> properties" with a patch that replaces additionalProperties with
> unevaluatedProperties in bosch,m_can.yaml, as suggested by
> Rob Herring.
> - Drop "dt-bindings: net: dsa: microchip: add missing spi-{cpha,cpol}
> properties" as setting the correct SPI mode is the responsibility of the
> driver (suggested by Rob Herring).
> - Rename ethernet0_rgmii_pins_d pinctrl group to ethernet0_rgmii_pins_e
> as the former is already taken in stm32-next, as suggested by
> Alexandre Torgue.
>
> Leonard Göhrs (8):
> dt-bindings: vendor-prefixes: Add prefix for ShineWorld Innovations
> dt-bindings: display: panel: mipi-dbi-spi: add shineworld lh133k
> compatible
> dt-bindings: display: panel: mipi-dbi-spi: add spi-3wire property
> dt-bindings: can: m_can: change from additional- to
> unevaluatedProperties
> dt-bindings: net: dsa: microchip: add interrupts property for ksz
> switches
> ARM: dts: stm32: Add pinmux groups for Linux Automation GmbH TAC
> dt-bindings: arm: stm32: Add compatible string for Linux Automation
> LXA TAC
> ARM: dts: stm32: lxa-tac: add Linux Automation GmbH TAC
>
> .../devicetree/bindings/arm/stm32/stm32.yaml | 4 +-
> .../display/panel/panel-mipi-dbi-spi.yaml | 3 +
> .../bindings/net/can/bosch,m_can.yaml | 2 +-
> .../bindings/net/dsa/microchip,ksz.yaml | 3 +
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 129 ++++
> .../arm/boot/dts/stm32mp157c-lxa-tac-gen1.dts | 93 +++
> .../arm/boot/dts/stm32mp157c-lxa-tac-gen2.dts | 172 +++++
> arch/arm/boot/dts/stm32mp15xc-lxa-tac.dtsi | 610 ++++++++++++++++++
> 10 files changed, 1018 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/boot/dts/stm32mp157c-lxa-tac-gen1.dts
> create mode 100644 arch/arm/boot/dts/stm32mp157c-lxa-tac-gen2.dts
> create mode 100644 arch/arm/boot/dts/stm32mp15xc-lxa-tac.dtsi
>
>
> base-commit: c9cb7e72e293141d0d6c1d74c26788d3a0605172
Patches 4 to 8 applied on stm32-next.
thanks
Alex
Powered by blists - more mailing lists