| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230712103213.101770-14-manivannan.sadhasivam@linaro.org>
Date: Wed, 12 Jul 2023 16:02:08 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: vireshk@...nel.org, nm@...com, sboyd@...nel.org,
myungjoo.ham@...sung.com, kyungmin.park@...sung.com,
cw00.choi@...sung.com, andersson@...nel.org,
konrad.dybcio@...aro.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org
Cc: linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
quic_asutoshd@...cinc.com, quic_cang@...cinc.com,
quic_nitirawa@...cinc.com, quic_narepall@...cinc.com,
quic_bhaskarv@...cinc.com, quic_richardp@...cinc.com,
quic_nguyenb@...cinc.com, quic_ziqichen@...cinc.com,
bmasney@...hat.com, krzysztof.kozlowski@...aro.org,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH 11/14] scsi: ufs: host: Add support for parsing OPP
OPP framework can be used to scale the clocks along with other entities
such as regulators, performance state etc... So let's add support for
parsing OPP from devicetree. OPP support in devicetree is added through
the "operating-points-v2" property which accepts the OPP table defining
clock frequency, regulator voltage, power domain performance state etc...
Since the UFS controller requires multiple clocks to be controlled for
proper working, devm_pm_opp_set_config() has been used which supports
scaling multiple clocks through custom ufshcd_opp_config_clks() callback.
It should be noted that the OPP support is not compatible with the old
"freq-table-hz" property. So only one can be used at a time even though
the UFS core supports both.
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
drivers/ufs/host/ufshcd-pltfrm.c | 116 +++++++++++++++++++++++++++++++
1 file changed, 116 insertions(+)
diff --git a/drivers/ufs/host/ufshcd-pltfrm.c b/drivers/ufs/host/ufshcd-pltfrm.c
index 0b7430033047..068c22378c88 100644
--- a/drivers/ufs/host/ufshcd-pltfrm.c
+++ b/drivers/ufs/host/ufshcd-pltfrm.c
@@ -8,8 +8,10 @@
* Vinayak Holikatti <h.vinayak@...sung.com>
*/
+#include <linux/clk.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
@@ -17,6 +19,8 @@
#include "ufshcd-pltfrm.h"
#include <ufs/unipro.h>
+#include <trace/events/ufs.h>
+
#define UFSHCD_DEFAULT_LANES_PER_DIRECTION 2
static int ufshcd_parse_clock_info(struct ufs_hba *hba)
@@ -205,6 +209,112 @@ static void ufshcd_init_lanes_per_dir(struct ufs_hba *hba)
}
}
+static int ufshcd_opp_config_clks(struct device *dev, struct opp_table *opp_table,
+ struct dev_pm_opp *opp, void *data,
+ bool scaling_down)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ struct list_head *head = &hba->clk_list_head;
+ struct ufs_clk_info *clki;
+ unsigned long freq;
+ u8 idx = 0;
+ int ret;
+
+ list_for_each_entry(clki, head, list) {
+ if (!IS_ERR_OR_NULL(clki->clk)) {
+ freq = dev_pm_opp_get_freq_indexed(opp, idx++);
+
+ /* Do not set rate for clocks having frequency as 0 */
+ if (!freq)
+ continue;
+
+ ret = clk_set_rate(clki->clk, freq);
+ if (ret) {
+ dev_err(dev, "%s: %s clk set rate(%ldHz) failed, %d\n",
+ __func__, clki->name, freq, ret);
+ return ret;
+ }
+
+ trace_ufshcd_clk_scaling(dev_name(dev),
+ (scaling_down ? "scaled down" : "scaled up"),
+ clki->name, hba->clk_scaling.target_freq, freq);
+ }
+ }
+
+ return 0;
+}
+
+static int ufshcd_parse_operating_points(struct ufs_hba *hba)
+{
+ struct device *dev = hba->dev;
+ struct device_node *np = dev->of_node;
+ struct dev_pm_opp_config config = {};
+ struct ufs_clk_info *clki;
+ const char **clk_names;
+ int cnt, i, ret;
+
+ if (!of_find_property(np, "operating-points-v2", NULL))
+ return 0;
+
+ if (of_find_property(np, "freq-table-hz", NULL)) {
+ dev_err(dev, "%s: operating-points and freq-table-hz are incompatible\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ cnt = of_property_count_strings(np, "clock-names");
+ if (cnt <= 0) {
+ dev_err(dev, "%s: Missing clock-names\n", __func__);
+ return -ENODEV;
+ }
+
+ /* OPP expects clk_names to be NULL terminated */
+ clk_names = devm_kcalloc(dev, cnt + 1, sizeof(*clk_names), GFP_KERNEL);
+ if (!clk_names)
+ return -ENOMEM;
+
+ /*
+ * We still need to get reference to all clocks as the UFS core uses
+ * them separately.
+ */
+ for (i = 0; i < cnt; i++) {
+ ret = of_property_read_string_index(np, "clock-names", i,
+ &clk_names[i]);
+ if (ret)
+ return ret;
+
+ clki = devm_kzalloc(dev, sizeof(*clki), GFP_KERNEL);
+ if (!clki)
+ return -ENOMEM;
+
+ clki->name = devm_kstrdup(dev, clk_names[i], GFP_KERNEL);
+ if (!clki->name)
+ return -ENOMEM;
+
+ if (!strcmp(clk_names[i], "ref_clk"))
+ clki->keep_link_active = true;
+
+ list_add_tail(&clki->list, &hba->clk_list_head);
+ }
+
+ config.clk_names = clk_names,
+ config.config_clks = ufshcd_opp_config_clks;
+
+ ret = devm_pm_opp_set_config(dev, &config);
+ if (ret)
+ return ret;
+
+ ret = devm_pm_opp_of_add_table(dev);
+ if (ret) {
+ dev_err(dev, "Failed to add OPP table: %d\n", ret);
+ return ret;
+ }
+
+ hba->use_pm_opp = true;
+
+ return 0;
+}
+
/**
* ufshcd_get_pwr_dev_param - get finally agreed attributes for
* power mode change
@@ -371,6 +481,12 @@ int ufshcd_pltfrm_init(struct platform_device *pdev,
ufshcd_init_lanes_per_dir(hba);
+ err = ufshcd_parse_operating_points(hba);
+ if (err) {
+ dev_err(dev, "%s: OPP parse failed %d\n", __func__, err);
+ goto dealloc_host;
+ }
+
err = ufshcd_init(hba, mmio_base, irq);
if (err) {
dev_err(dev, "Initialization failed\n");
--
2.25.1
Powered by blists - more mailing lists