lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <bd7c91c4-9528-aaeb-9789-03191dc7761b@nvidia.com>
Date:   Thu, 13 Jul 2023 11:49:32 +0300
From:   Max Gurtovoy <mgurtovoy@...dia.com>
To:     Hannes Reinecke <hare@...e.de>, Daniel Wagner <dwagner@...e.de>
Cc:     linux-nvme@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-block@...r.kernel.org, Chaitanya Kulkarni <kch@...dia.com>,
        Shin'ichiro Kawasaki <shinichiro.kawasaki@....com>,
        Sagi Grimberg <sagi@...mberg.me>,
        James Smart <jsmart2021@...il.com>,
        Martin Belanger <Martin.Belanger@...l.com>
Subject: Re: [PATCH blktests v1 2/3] nvme/rc: Avoid triggering host nvme-cli
 autoconnect



On 13/07/2023 9:00, Hannes Reinecke wrote:
> On 7/13/23 02:12, Max Gurtovoy wrote:
>>
>>
>> On 12/07/2023 15:04, Daniel Wagner wrote:
>>> On Mon, Jul 10, 2023 at 07:30:20PM +0300, Max Gurtovoy wrote:
>>>>
>>>>
>>>> On 10/07/2023 18:03, Daniel Wagner wrote:
>>>>> On Mon, Jul 10, 2023 at 03:31:23PM +0300, Max Gurtovoy wrote:
>>>>>> I think it is more than just commit message.
>>>>>
>>>>> Okay, starting to understand what's the problem.
>>>>>
>>>>>> A lot of code that we can avoid was added regarding the --context 
>>>>>> cmdline
>>>>>> argument.
>>>>>
>>>>> Correct and it's not optional to get the tests passing for the fc 
>>>>> transport.
>>>>
>>>> why the fc needs the --context to pass tests ?
>>>
>>> A typical nvme test consists out of following steps (nvme/004):
>>>
>>> // nvme target setup (1)
>>>     _create_nvmet_subsystem "blktests-subsystem-1" "${loop_dev}" \
>>>         "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
>>>     _add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
>>>
>>> // nvme host setup (2)
>>>     _nvme_connect_subsys "${nvme_trtype}" blktests-subsystem-1
>>>
>>>     local nvmedev
>>>     nvmedev=$(_find_nvme_dev "blktests-subsystem-1")
>>>     cat "/sys/block/${nvmedev}n1/uuid"
>>>     cat "/sys/block/${nvmedev}n1/wwid"
>>>
>>> // nvme host teardown (3)
>>>     _nvme_disconnect_subsys blktests-subsystem-1
>>>
>>> // nvme target teardown (4)
>>>     _remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-1"
>>>     _remove_nvmet_subsystem "blktests-subsystem-1"
>>>
>>>
>>> The corresponding output with --context
>>>
>>>   run blktests nvme/004 at 2023-07-12 13:49:50
>>> // (1)
>>>   loop0: detected capacity change from 0 to 32768
>>>   nvmet: adding nsid 1 to subsystem blktests-subsystem-1
>>>   nvme nvme2: NVME-FC{0}: create association : host wwpn 
>>> 0x20001100aa000002  rport wwpn 0x20001100aa000001: NQN 
>>> "blktests-subsystem-1"
>>>   (NULL device *): {0:0} Association created
>>>   [174] nvmet: ctrl 1 start keep-alive timer for 5 secs
>>> // (2)
>>>   nvmet: creating nvm controller 1 for subsystem blktests-subsystem-1 
>>> for NQN 
>>> nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349.
>>>   [374] nvmet: adding queue 1 to ctrl 1.
>>>   [1138] nvmet: adding queue 2 to ctrl 1.
>>>   [73] nvmet: adding queue 3 to ctrl 1.
>>>   [174] nvmet: adding queue 4 to ctrl 1.
>>>   nvme nvme2: NVME-FC{0}: controller connect complete
>>>   nvme nvme2: NVME-FC{0}: new ctrl: NQN "blktests-subsystem-1"
>>> // (3)
>>>   nvme nvme2: Removing ctrl: NQN "blktests-subsystem-1"
>>> // (4)
>>>   [1138] nvmet: ctrl 1 stop keep-alive
>>>   (NULL device *): {0:0} Association deleted
>>>   (NULL device *): {0:0} Association freed
>>>   (NULL device *): Disconnect LS failed: No Association
>>>
>>>
>>> and without --context
>>>
>>>   run blktests nvme/004 at 2023-07-12 13:50:33
>>> // (1)
>>>   loop1: detected capacity change from 0 to 32768
>>>   nvmet: adding nsid 1 to subsystem blktests-subsystem-1
>>>   nvme nvme2: NVME-FC{0}: create association : host wwpn 
>>> 0x20001100aa000002  rport wwpn 0x20001100aa000001: NQN 
>>> "nqn.2014-08.org.nvmexpress.discovery"
>>
>> why does this association to discovery controller created ? because of 
>> some system service ?
>>
> Yes. There are nvme-autoconnect udev rules and systemd services 
> installed per default (in quite some systems now).
> And it's really hard (if not impossible) to disable these services (as 
> we cannot be sure how they are named, hence we wouldn't know which 
> service to disable.

Right. We shouldn't disable them IMO.

> 
>> can we configure the blktests subsystem not to be discovered or add 
>> some access list to it ?
>>
> But that's precisely what the '--context' thing is attempting to do ...

I'm not sure it is.

Exposing the subsystem is from the target configuration side.
Additionally, the --context (which is in the initiator/host side), 
according to Daniel, is there to distinguish between different 
invocations. I proposed that blktests subsystem will not be part of 
discoverable fabric or protected somehow by access list. Therefore, no 
additional invocation will happen.


> 
> [ .. ]
>>>>>
>>>>> It really solves the problem that the autoconnect setup of nvme-cli is
>>>>> distrubing the tests (*). The only other way I found to stop the 
>>>>> autoconnect is by disabling the udev rule completely. If 
>>>>> autoconnect isn't enabled the context isn't necessary.
>>>>> Though changing system configuration from blktests seems at bit 
>>>>> excessive.
>>>>
>>>> we should not stop any autoconnect during blktests. The autoconnect 
>>>> and all the system admin services should run normally.
>>>
>>> I do not agree here. The current blktests are not designed for run as
>>> intergration tests. Sure we should also tests this but currently 
>>> blktests is just not there and tcp/rdma are not actually covered anyway.
>>
>> what do you mean tcp/rdma not covered ?
>>
> Because there is no autoconnect functionality for tcp/rdma.
> For FC we have full topology information, and the driver can emit udev 
> messages whenever a NVMe port appears in the fabrics (and the systemd 
> machinery will then start autoconnect).
> For TCP/RDMA we do not have this, so really there's nothing which could 
> send udev events (discounting things like mDNS and nvme-stas for now).
> 
>> And maybe we should make several changes in the blktests to make it 
>> standalone without interfering the existing configuration make by some 
>> system administrator.
>>
> ??
> But this is what we are trying with this patches.
> The '--context' flag only needs to be set for the blktests, to inform 
> the rest of the system that these subsystems/configuration is special 
> and should be exempted from 'normal' system processing.

The --context is initiator configuration. I'm referring to changes in 
the target configuration.
This will guarantee that things will work also in the environment where 
we have nvme-cli without the --context flag.

> 
> Cheers,
> 
> Hannes

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ