| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230713095111.335346-3-durai.manickamkr@microchip.com>
Date: Thu, 13 Jul 2023 15:21:11 +0530
From: Durai Manickam KR <durai.manickamkr@...rochip.com>
To: <Hari.PrasathGE@...rochip.com>,
<balamanikandan.gunasundar@...rochip.com>,
<manikandan.m@...rochip.com>, <varshini.rajendran@...rochip.com>,
<dharma.b@...rochip.com>, <nayabbasha.sayed@...rochip.com>,
<balakrishnan.s@...rochip.com>, <cristian.birsan@...rochip.com>,
<nicolas.ferre@...rochip.com>, <krzysztof.kozlowski@...aro.org>,
<alexandre.belloni@...tlin.com>, <davem@...emloft.net>,
<arnd@...db.de>, <olof@...om.net>, <soc@...nel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <Kavyasree.Kotagiri@...rochip.com>,
<Horatiu.Vultur@...rochip.com>, <robh+dt@...nel.org>,
<andrew@...n.ch>, <michael@...le.cc>, <jerry.ray@...rochip.com>,
<conor+dt@...nel.org>, <jesper.nilsson@...s.com>,
<andre.przywara@....com>, <ada@...rsis.com>,
<radu_nicolae.pirea@....ro>, <richard.genoud@...il.com>,
<gregkh@...uxfoundation.org>, <linux-spi@...r.kernel.org>,
<linux-serial@...r.kernel.org>
CC: Durai Manickam KR <durai.manickamkr@...rochip.com>
Subject: [PATCHv2 2/2] ARM: dts: at91: sam9x60: fix the SOC detection
Remove the dbgu compatible strings in the UART submodule of the
flexcom for the proper SOC detection.
Fixes: 99c808335877 (ARM: dts: at91: sam9x60: Add missing flexcom definitions)
Signed-off-by: Durai Manickam KR <durai.manickamkr@...rochip.com>
---
arch/arm/boot/dts/microchip/sam9x60.dtsi | 26 ++++++++++++------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 8b53997675e7..73d570a17269 100644
--- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -172,7 +172,7 @@ flx4: flexcom@...00000 {
status = "disabled";
uart4: serial@200 {
- compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
@@ -240,7 +240,7 @@ flx5: flexcom@...04000 {
status = "disabled";
uart5: serial@200 {
- compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -370,7 +370,7 @@ flx11: flexcom@...20000 {
status = "disabled";
uart11: serial@200 {
- compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
@@ -419,7 +419,7 @@ flx12: flexcom@...24000 {
status = "disabled";
uart12: serial@200 {
- compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
@@ -576,7 +576,7 @@ flx6: flexcom@...10000 {
status = "disabled";
uart6: serial@200 {
- compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
@@ -625,7 +625,7 @@ flx7: flexcom@...14000 {
status = "disabled";
uart7: serial@200 {
- compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
@@ -674,7 +674,7 @@ flx8: flexcom@...18000 {
status = "disabled";
uart8: serial@200 {
- compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
@@ -723,7 +723,7 @@ flx0: flexcom@...1c000 {
status = "disabled";
uart0: serial@200 {
- compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
@@ -791,7 +791,7 @@ flx1: flexcom@...20000 {
status = "disabled";
uart1: serial@200 {
- compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
@@ -859,7 +859,7 @@ flx2: flexcom@...24000 {
status = "disabled";
uart2: serial@200 {
- compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
@@ -927,7 +927,7 @@ flx3: flexcom@...28000 {
status = "disabled";
uart3: serial@200 {
- compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
@@ -1050,7 +1050,7 @@ flx9: flexcom@...40000 {
status = "disabled";
uart9: serial@200 {
- compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
@@ -1099,7 +1099,7 @@ flx10: flexcom@...44000 {
status = "disabled";
uart10: serial@200 {
- compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
--
2.25.1
Powered by blists - more mailing lists