lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230714063136.21368-6-quic_luoj@quicinc.com>
Date:   Fri, 14 Jul 2023 14:31:35 +0800
From:   Luo Jie <quic_luoj@...cinc.com>
To:     <andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
        <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
        <pabeni@...hat.com>
CC:     <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Luo Jie <quic_luoj@...cinc.com>
Subject: [PATCH v2 5/6] net: phy: at803x: remove qca8081 1G fast retrain and slave seed config

The fast retrain and master slave seed configs are only applicable when
the 2.5G capability is supported.

Signed-off-by: Luo Jie <quic_luoj@...cinc.com>
---
 drivers/net/phy/at803x.c | 45 ++++++++++++++++++++++++----------------
 1 file changed, 27 insertions(+), 18 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index cb4c45c81a85..5e9d2a4d8bbc 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1766,20 +1766,24 @@ static int qca808x_config_init(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	/* Config the fast retrain for the link 2500M */
-	ret = qca808x_phy_fast_retrain_config(phydev);
-	if (ret)
-		return ret;
-
-	ret = genphy_read_master_slave(phydev);
-	if (ret < 0)
-		return ret;
-
-	if (!qca808x_is_prefer_master(phydev)) {
-		/* Enable seed and configure lower ramdom seed to make phy linked as slave mode */
-		ret = qca808x_phy_ms_seed_enable(phydev, true);
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported)) {
+		/* Config the fast retrain for the link 2500M */
+		ret = qca808x_phy_fast_retrain_config(phydev);
 		if (ret)
 			return ret;
+
+		ret = genphy_read_master_slave(phydev);
+		if (ret < 0)
+			return ret;
+
+		if (!qca808x_is_prefer_master(phydev)) {
+			/* Enable seed and configure lower ramdom seed to make phy
+			 * linked as slave mode.
+			 */
+			ret = qca808x_phy_ms_seed_enable(phydev, true);
+			if (ret)
+				return ret;
+		}
 	}
 
 	/* Configure adc threshold as 100mv for the link 10M */
@@ -1821,11 +1825,13 @@ static int qca808x_read_status(struct phy_device *phydev)
 		 * value is configured as the same value, the link can't be up and no link change
 		 * occurs.
 		 */
-		if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
-				qca808x_is_prefer_master(phydev)) {
-			qca808x_phy_ms_seed_enable(phydev, false);
-		} else {
-			qca808x_phy_ms_seed_enable(phydev, true);
+		if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported)) {
+			if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
+					qca808x_is_prefer_master(phydev)) {
+				qca808x_phy_ms_seed_enable(phydev, false);
+			} else {
+				qca808x_phy_ms_seed_enable(phydev, true);
+			}
 		}
 	}
 
@@ -1840,7 +1846,10 @@ static int qca808x_soft_reset(struct phy_device *phydev)
 	if (ret < 0)
 		return ret;
 
-	return qca808x_phy_ms_seed_enable(phydev, true);
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported))
+		ret = qca808x_phy_ms_seed_enable(phydev, true);
+
+	return ret;
 }
 
 static bool qca808x_cdt_fault_length_valid(int cdt_code)
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ