[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230714013756.1546769-1-sre@kernel.org>
Date: Fri, 14 Jul 2023 03:37:37 +0200
From: Sebastian Reichel <sre@...nel.org>
To: Sebastian Reichel <sre@...nel.org>
Cc: Gerald Loacker <gerald.loacker@...fvision.net>,
Michael Riesch <michael.riesch@...fvision.net>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Thierry Reding <thierry.reding@...il.com>,
Sam Ravnborg <sam@...nborg.org>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org
Subject: [PATCH v3 00/19] Sitronix ST7789V improvements
Hi,
This adds panel support for Inanbo T28CP45TN89, which I found inside of a
handheld thermal camera. The panel is based on the st7789v controller. All
information is based on reverse engineering. I also appended the series
from Miquel Raynal adding EDT ET028013DMA panel support, so that I could
easily test it with my SPI_NO_RX setup. They are slightly different due
to rebasing.
Changes since PATCHv2:
* https://lore.kernel.org/all/20230422205012.2464933-1-sre@kernel.org/
* https://lore.kernel.org/all/20230616163255.2804163-1-miquel.raynal@bootlin.com/
* Add Rob Herring's R-b for the DT binding
* Make panel info "static const"
* Add Michael Riesch's R-b to all my patches
* Rebase to 6.5-rc1
* Append Miquel's series
Changes since PATCHv1:
* https://lore.kernel.org/all/20230317232355.1554980-1-sre@kernel.org/
* Apply DT binding changes requested by Krzysztof Kozlowski and his Ack
* I changed the driver patches to avoid code duplication and splitted
the code a bit more
Greetings,
-- Sebastian
Miquel Raynal (6):
dt-bindings: display: st7789v: Add the edt,et028013dma panel
compatible
dt-bindings: display: st7789v: bound the number of Rx data lines
drm/panel: sitronix-st7789v: Use 9 bits per spi word by default
drm/panel: sitronix-st7789v: Clarify a definition
drm/panel: sitronix-st7789v: Add EDT ET028013DMA panel support
drm/panel: sitronix-st7789v: Check display ID
Sebastian Reichel (13):
dt-bindings: vendor-prefixes: add Inanbo
dt-bindings: display: st7789v: add Inanbo T28CP45TN89
drm/panel: sitronix-st7789v: add SPI ID table
drm/panel: sitronix-st7789v: remove unused constants
drm/panel: sitronix-st7789v: make reset GPIO optional
drm/panel: sitronix-st7789v: simplify st7789v_spi_write
drm/panel: sitronix-st7789v: improve error handling
drm/panel: sitronix-st7789v: avoid hardcoding mode info
drm/panel: sitronix-st7789v: avoid hardcoding panel size
drm/panel: sitronix-st7789v: add media bus format
drm/panel: sitronix-st7789v: avoid hardcoding invert mode
drm/panel: sitronix-st7789v: avoid hardcoding polarity info
drm/panel: sitronix-st7789v: add Inanbo T28CP45TN89 support
.../display/panel/sitronix,st7789v.yaml | 10 +-
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
.../gpu/drm/panel/panel-sitronix-st7789v.c | 262 +++++++++++++++---
3 files changed, 237 insertions(+), 37 deletions(-)
--
2.40.1
Powered by blists - more mailing lists